Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Centerville in the Atlas, the following communities of the 1890's would have been found near the current location of Centerville. The following communities are listed based on their distance, with the one closest to Centerville listed first.
- Lesterville
(6 miles [9.7 km] to the east)
- Black
(6 miles [9.7 km] to the north)
- Bee Fork
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for Bee Fork
- Bee Fork is located in Reynolds County
- Alamode ‑ Historic
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Alamode have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alamode
- Alamode is located in Reynolds County
- Redford
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Redford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redford
- Redford is located in Reynolds County
- West Fork
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for West Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Fork
- West Fork is located in Reynolds County
- Oates
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Oates
- Oates is located in Reynolds County
- Edgehill
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Edgehill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgehill
- Edgehill is located in Reynolds County
- Greeley
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Greeley
- Greeley is located in Reynolds County
- Goodland ‑ Historic
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Goodland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodland
- Goodland is located in Iron County
- Sabula
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Sabula
- Sabula is located in Iron County
- Munger
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Munger
- Munger is located in Reynolds County
- Annapolis
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Annapolis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annapolis
- Annapolis is located in Iron County
- Population from the 2020 Census: 336 people
- Jump to TripAdvisor's Tourism page for Annapolis <2>
- Glover
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Glover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glover
- Glover is located in Iron County
- Hogan
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Hogan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hogan
- Hogan is located in Iron County
- Red Point
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Red Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Point
- Red Point is located in Iron County
- Vulcan
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Vulcan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vulcan
- Vulcan is located in Iron County
- Good Water
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Good Water. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Good Water
- Good Water is located in Iron County
- Gads Hill
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Gads Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gads Hill
- Gads Hill is located in Wayne County
- Gila
(19 miles [30.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Gila. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Gila
- Gila is located in Dent County
- Des Arc
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Des Arc
- Des Arc is located in Iron County
- Population from the 2020 Census: 162 people
- Arcadia
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Arcadia. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Iron County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Arcadia <2>
- Ironton
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Ironton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ironton
- Ironton is located in Iron County
- Population from the 2020 Census: 1,386 people
- Jump to TripAdvisor's Tourism page for Ironton <2>
- Pilot Knob
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Pilot Knob have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pilot Knob
- Pilot Knob is located in Iron County
- Population from the 2020 Census: 711 people
- Jump to TripAdvisor's Tourism page for Pilot Knob <2>
- Ghermanville
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Ghermanville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ghermanville
- Ghermanville is located in Iron County
- Graniteville
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Graniteville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Graniteville
- Graniteville is located in Iron County
- Belleview
(21 miles [33.8 km] to the northeast)
- Jump to our Gazetteer entry for Belleview
- Belleview is located in Iron County
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Centerville. If you can help, please contact us through our Feedback Page.
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Centerville, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |