Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Patricks Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Patricks Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Patricks Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Clarence
(Less than 2 miles to the northeast)- Jump to our Gazetteer entry for Clarence
- Clarence is located in Shelby County
- Population from the 2020 Census: 752 people
- Jump to TripAdvisor's Tourism page for Clarence <2>
- Anabel
(3 miles [4.8 km] to the west) - Enterprise
(5 miles [8 km] to the south)- Note: The GPS coordinates that we are using for Enterprise have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Enterprise
- Enterprise is located in Shelby County
- Lentner
(6 miles [9.7 km] to the east) - Woodville
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Woodville
- Woodville is located in Macon County
- Macon
(10 miles [16.1 km] to the west)- Note: The GPS coordinates that we are using for Macon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macon
- Macon is located in Macon County
- Population from the 2020 Census: 5,341 people
- Jump to TripAdvisor's Tourism page for Macon <2>
- Woodlawn
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Monroe County
- Kirby
(11 miles [17.7 km] to the northeast) - Excello
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Excello
- Excello is located in Macon County
- Jump to TripAdvisor's Tourism page for Excello <2>
- Shelbina
(12 miles [19.3 km] to the east)- Note: The GPS coordinates that we are using for Shelbina have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelbina
- Shelbina is located in Shelby County
- Population from the 2020 Census: 1,582 people
- Jump to TripAdvisor's Tourism page for Shelbina <2>
- Leonard
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Leonard
- Leonard is located in Shelby County
- Population from the 2020 Census: 56 people
- Jump to TripAdvisor's Tourism page for Leonard <2>
- Shelbyville
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for Shelbyville
- Shelbyville is located in Shelby County
- Population from the 2020 Census: 512 people
- Economy
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Economy
- Economy is located in Macon County
- Jacksonville
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Randolph County
- Population from the 2020 Census: 145 people
- Ardmore
(15 miles [24.1 km] to the southwest) - Granville
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Granville
- Granville is located in Monroe County
- Atlanta
(15 miles [24.1 km] to the northwest)- Jump to our Gazetteer entry for Atlanta
- Atlanta is located in Macon County
- Population from the 2020 Census: 384 people
- Bevier
(15 miles [24.1 km] to the west)- Note: The GPS coordinates that we are using for Bevier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bevier
- Bevier is located in Macon County
- Population from the 2020 Census: 688 people
- Jump to TripAdvisor's Tourism page for Bevier <2>
- Sue City
(16 miles [25.7 km] to the north) - Bethel
(16 miles [25.7 km] to the northeast)- Note: The GPS coordinates that we are using for Bethel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel
- Bethel is located in Shelby County
- Population from the 2020 Census: 112 people
- Jump to TripAdvisor's Tourism page for Bethel <2>
- Cairo
(17 miles [27.4 km] to the southwest)- Jump to our Gazetteer entry for Cairo
- Cairo is located in Randolph County
- Population from the 2020 Census: 273 people
- Lakenan
(17 miles [27.4 km] to the east)- Jump to our Gazetteer entry for Lakenan
- Lakenan is located in Shelby County
- Madison
(18 miles [29 km] to the south)- Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madison
- Madison is located in Monroe County
- Population from the 2020 Census: 542 people
- Jump to TripAdvisor's Tourism page for Madison <2>
- Holliday
(18 miles [29 km] to the southeast) - Love Lake
(18 miles [29 km] to the northwest) - Callao
(18 miles [29 km] to the west)- Jump to our Gazetteer entry for Callao
- Callao is located in Macon County
- Population from the 2020 Census: 289 people
- Jump to TripAdvisor's Tourism page for Callao <2>
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Patricks Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.7353, Longitude: -92.2716 In this case, the coordinates for the St. Patricks Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |