|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Marys Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Marys Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Marys Cemetery. We've listed the following communities based on their distance, with the closest first.
- Lamar Heights
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Lamar Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lamar Heights
- Lamar Heights is located in Barton County
- Population from the 2020 Census: 173 people
- Lamar
(Less than 2 miles to the east)
- Oakton
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Oakton
- Oakton is located in Barton County
- Kenoma
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Kenoma
- Kenoma is located in Barton County
- Irwin
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Irwin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Irwin
- Irwin is located in Barton County
- Bushnell
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Bushnell
- Bushnell is located in Barton County
- Milford
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Milford. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Milford
- Milford is located in Barton County
- Population from the 2020 Census: 23 people
- Newport
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Newport
- Newport is located in Barton County
- Jasper
(11 miles [17.7 km] to the south)
- Layneville
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Layneville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Layneville
- Layneville is located in Barton County
- Sheldon
(11 miles [17.7 km] to the north)
- Liberal
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Liberal have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberal
- Liberal is located in Barton County
- Population from the 2020 Census: 702 people
- Nashville
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Nashville
- Nashville is located in Barton County
- Golden City
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Golden City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Golden City
- Golden City is located in Barton County
- Population from the 2020 Census: 710 people
- Jump to TripAdvisor's Tourism page for Golden City <3>
- Bellamy
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Bellamy. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bellamy
- Bellamy is located in Vernon County
- Carytown
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Carytown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carytown
- Carytown is located in Jasper County
- Population from the 2020 Census: 283 people
- Bronaugh
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Bronaugh
- Bronaugh is located in Vernon County
- Population from the 2020 Census: 231 people
- Mindenmines
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Mindenmines have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mindenmines
- Mindenmines is located in Barton County
- Population from the 2020 Census: 342 people
- Jump to TripAdvisor's Tourism page for Mindenmines <3>
- Milo
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Milo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milo
- Milo is located in Vernon County
- Population from the 2020 Census: 86 people
- Jerico Springs
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Jerico Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jerico Springs
- Jerico Springs is located in Cedar County
- Population from the 2020 Census: 232 people
- Burgess
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Burgess have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burgess
- Burgess is located in Barton County
- Estimated population in 2017: 54 people
- Medoc
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Medoc. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Medoc
- Medoc is located in Jasper County
- Neck City
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Neck City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Neck City
- Neck City is located in Jasper County
- Population from the 2020 Census: 196 people
- Montevallo
(18 miles [29 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Montevallo. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Montevallo
- Montevallo is located in Vernon County
- Mulberry
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Mulberry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mulberry
- Mulberry is located in Crawford County (KS)
- Population from the 2020 Census: 521 people
- Jump to TripAdvisor's Tourism page for Mulberry <3>
- Curranville
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Curranville
- Curranville is located in Crawford County (KS)
- Yale
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Yale
- Yale is located in Crawford County (KS)
- Cornell
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Cornell
- Cornell is located in Crawford County (KS)
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Marys Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.4959, Longitude: -94.2972 In this case, the coordinates for the St. Marys Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|