|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Phares Family Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Phares Family Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Phares Family Cemetery (FG ID #1988451). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Phares Family Cemetery. We've listed the following communities based on their distance, with the closest first.
- Proctorville
(Less than 2 miles to the northeast)
- Braymer
(4 miles [6.4 km] to the south)
- Ludlow
(5 miles [8 km] to the east)
- Gould Farm
(5 miles [8 km] to the west)
- Breckenridge
(7 miles [11.3 km] to the north)
- Mooresville
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Mooresville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mooresville
- Mooresville is located in Livingston County
- Population from the 2020 Census: 92 people
- Dawn
(8 miles [12.9 km] to the east)
- Nettleton
(8 miles [12.9 km] to the northwest)
- Cowgill
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Cowgill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cowgill
- Cowgill is located in Caldwell County
- Population from the 2020 Census: 182 people
- Google driving directions:
- From your current location to Cowgill
- From the Phares Family Cemetery to Cowgill
- Utica
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Utica
- Utica is located in Livingston County
- Population from the 2020 Census: 250 people
- Georgeville
(12 miles [19.3 km] to the southwest)
- Hamilton
(12 miles [19.3 km] to the northwest)
- Kingston
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Kingston have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingston
- Kingston is located in Caldwell County
- Population from the 2020 Census: 332 people
- Ovid ‑ Historic
(13 miles [20.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Ovid. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ovid
- Ovid is located in Ray County
- Google driving directions:
- From your current location to Ovid
- From the Phares Family Cemetery to Ovid
- Lock Springs
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Lock Springs have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lock Springs
- Lock Springs is located in Daviess County
- Population from the 2020 Census: 56 people
- Polo
(14 miles [22.5 km] to the southwest)
- Mandeville
(14 miles [22.5 km] to the southeast)
- Stet
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Stet. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stet
- Stet is located in Carroll County
- Google driving directions:
- From your current location to Stet
- From the Phares Family Cemetery to Stet
- Chillicothe
(16 miles [25.7 km] to the northeast)
- Knoxville
(18 miles [29 km] to the southwest)
- Kidder
(18 miles [29 km] to the northwest)
- Gallatin
(19 miles [30.6 km] to the northwest)
- Avalon
(19 miles [30.6 km] to the east)
- Rockingham
(20 miles [32.2 km] to the south)
- Bogard
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Bogard have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bogard
- Bogard is located in Carroll County
- Population from the 2020 Census: 156 people
- Jump to TripAdvisor's Tourism page for Bogard <4>
- Tina
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Tina have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tina
- Tina is located in Carroll County
- Population from the 2020 Census: 142 people
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Phares Family Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.6547, Longitude: -93.8008 |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|