|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McRone Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McRone Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McRone Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Grandin
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Grandin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grandin
- Grandin is located in Carter County
- Population from the 2020 Census: 231 people
- Ellsinore
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Ellsinore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellsinore
- Ellsinore is located in Carter County
- Population from the 2020 Census: 426 people
- Jump to TripAdvisor's Tourism page for Ellsinore <3>
- Bennett
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Bennett
- Bennett is located in Ripley County
- Chicopee
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Chicopee
- Chicopee is located in Carter County
- Doniphan
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Doniphan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doniphan
- Doniphan is located in Ripley County
- Population from the 2020 Census: 1,919 people
- Jump to TripAdvisor's Tourism page for Doniphan <3>
- Van Buren
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Carter County
- Population from the 2020 Census: 798 people
- Jump to TripAdvisor's Tourism page for Van Buren <3>
- Briar
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Briar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Briar
- Briar is located in Ripley County
- Fairdealing
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Fairdealing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairdealing
- Fairdealing is located in Ripley County
- Mill Spring
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Mill Spring
- Mill Spring is located in Wayne County
- Population from the 2020 Census: 175 people
- Gamburg
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gamburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Gamburg
- Gamburg is located in Ripley County
- Williamsville
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Williamsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsville
- Williamsville is located in Wayne County
- Population from the 2020 Census: 327 people
- Jump to TripAdvisor's Tourism page for Williamsville <3>
- Oxly
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Oxly have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oxly
- Oxly is located in Ripley County
- Bardley
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Bardley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bardley
- Bardley is located in Ripley County
- Ponder
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ponder. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ponder
- Ponder is located in Ripley County
- Dees Town
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Dees Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dees Town
- Dees Town is located in Wayne County
- Fremont
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Fremont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fremont
- Fremont is located in Carter County
- Naylor
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Naylor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Naylor
- Naylor is located in Ripley County
- Population from the 2020 Census: 585 people
- Harviell
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Harviell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harviell
- Harviell is located in Butler County
- Jump to TripAdvisor's Tourism page for Harviell <3>
- Poplar Bluff
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Poplar Bluff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Bluff
- Poplar Bluff is located in Butler County
- Population from the 2020 Census: 16,807 people
- Jump to TripAdvisor's Tourism page for Poplar Bluff <3>
- Piedmont
(22 miles [35.4 km] to the north)
- Gatewood
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Gatewood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gatewood
- Gatewood is located in Ripley County
- Current View
(23 miles [37 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Current View. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Current View
- Current View is located in Clay County (AR)
- Current View
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Current View
- Current View is located in Ripley County
- Kelly Town
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Kelly Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kelly Town
- Kelly Town is located in Butler County
- Neelyville
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Neelyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Neelyville
- Neelyville is located in Butler County
- Population from the 2020 Census: 470 people
- Jump to TripAdvisor's Tourism page for Neelyville <3>
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McRone Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.8434, Longitude: -90.8126 In this case, the coordinates for the McRone Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|