|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Licklider Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Licklider Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Licklider Cemetery. We've listed the following communities based on their distance, with the closest first.
- Jake Prairie
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Jake Prairie
- Jake Prairie is located in Crawford County
- Redbird
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for Redbird
- Redbird is located in Gasconade County
- Oak Hill
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for Oak Hill
- Oak Hill is located in Crawford County
- Bem
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Bem
- Bem is located in Gasconade County
- Rosati
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Rosati
- Rosati is located in Phelps County
- Cuba
(9 miles [14.5 km] to the southeast)
- Argo
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Argo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Argo
- Argo is located in Crawford County
- Bland
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Bland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bland
- Bland is located in Gasconade County
- Population from the 2020 Census: 523 people
- Jump to TripAdvisor's Tourism page for Bland <2>
- Lanes Prairie
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Lanes Prairie
- Lanes Prairie is located in Maries County
- Saint James
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint James have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint James
- Saint James is located in Phelps County
- Population from the 2020 Census: 4,006 people
- Jump to TripAdvisor's Tourism page for Saint James <2>
- Leasburg
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Leasburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leasburg
- Leasburg is located in Crawford County
- Population from the 2020 Census: 320 people
- Jump to TripAdvisor's Tourism page for Leasburg <2>
- Japan
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Japan
- Japan is located in Franklin County
- Boone ‑ Historic
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Boone. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Boone
- Boone is located in Franklin County
- Owensville
(12 miles [19.3 km] to the north)
- Vichy
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Vichy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vichy
- Vichy is located in Maries County
- Belle
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Belle have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belle
- Belle is located in Maries County
- Population from the 2020 Census: 1,489 people
- Jump to TripAdvisor's Tourism page for Belle <2>
- Bourbon
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Bourbon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bourbon
- Bourbon is located in Crawford County
- Population from the 2020 Census: 1,563 people
- Jump to TripAdvisor's Tourism page for Bourbon <2>
- Strain
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Strain
- Strain is located in Franklin County
- Elmont
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Elmont
- Elmont is located in Franklin County
- Byron
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Byron. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Byron
- Byron is located in Osage County
- Lindell
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Lindell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lindell
- Lindell is located in Maries County
- Steelville
(16 miles [25.7 km] to the southeast)
- Sankey ‑ Historic
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Sankey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sankey
- Sankey is located in Crawford County
- Midland
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Crawford County
- Saint Cloud
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Saint Cloud have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Cloud
- Saint Cloud is located in Crawford County
- Population from the 2020 Census: 39 people
- Champion City
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Champion City. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Champion City
- Champion City is located in Franklin County
- Rosebud
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Rosebud have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rosebud
- Rosebud is located in Gasconade County
- Population from the 2020 Census: 399 people
- Jump to TripAdvisor's Tourism page for Rosebud <2>
- Paydown
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Paydown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Paydown
- Paydown is located in Maries County
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Licklider Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.1667, Longitude: -91.5152 In this case, the coordinates for the Licklider Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|