RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Missouri >> Wayne County >> Julian Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Missouri


The Commemorative Quarter for Missouri







Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Julian Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Julian Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Julian Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Patterson
    (4 miles [6.4 km] to the north)
  • Dees Town
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Dees Town have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dees Town
    • Dees Town is located in Wayne County
  • Greenville
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenville
    • Greenville is located in Wayne County
    • Population from the 2020 Census: 455 people
    • Jump to TripAdvisor's Tourism page for Greenville <2>
  • Silva
    (6 miles [9.7 km] to the northeast)
    • Jump to our Gazetteer entry for Silva
    • Silva is located in Wayne County
  • Mill Spring
    (7 miles [11.3 km] to the southwest)
    • Jump to our Gazetteer entry for Mill Spring
    • Mill Spring is located in Wayne County
    • Population from the 2020 Census: 175 people
  • Piedmont
    (7 miles [11.3 km] to the west)
  • Williamsville
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Williamsville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Williamsville
    • Williamsville is located in Wayne County
    • Population from the 2020 Census: 327 people
    • Jump to TripAdvisor's Tourism page for Williamsville <2>
  • Des Arc
    (11 miles [17.7 km] to the north)
    • Jump to our Gazetteer entry for Des Arc
    • Des Arc is located in Iron County
    • Population from the 2020 Census: 162 people
  • Lodi
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lodi have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lodi
    • Lodi is located in Wayne County
  • Brunot
    (12 miles [19.3 km] to the north)
    • Jump to our Gazetteer entry for Brunot
    • Brunot is located in Wayne County
  • Vulcan
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Vulcan have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vulcan
    • Vulcan is located in Iron County
  • Clubb
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Clubb have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clubb
    • Clubb is located in Wayne County
  • Hiram
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Hiram have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hiram
    • Hiram is located in Wayne County
  • Shook
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Shook have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shook
    • Shook is located in Wayne County
  • Ellsinore
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Ellsinore have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellsinore
    • Ellsinore is located in Carter County
    • Population from the 2020 Census: 426 people
    • Jump to TripAdvisor's Tourism page for Ellsinore <2>
  • Annapolis
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Annapolis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Annapolis
    • Annapolis is located in Iron County
    • Population from the 2020 Census: 336 people
    • Jump to TripAdvisor's Tourism page for Annapolis <2>
  • Lowndes
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Lowndes have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lowndes
    • Lowndes is located in Wayne County
  • Saco
    (18 miles [29 km] to the northeast)
    • Jump to our Gazetteer entry for Saco
    • Saco is located in Madison County
  • Sabula
    (20 miles [32.2 km] to the north)
    • Jump to our Gazetteer entry for Sabula
    • Sabula is located in Iron County
  • Cascade
    (20 miles [32.2 km] to the northeast)
    • Jump to our Gazetteer entry for Cascade
    • Cascade is located in Wayne County
  • Wappapello
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Wappapello have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wappapello
    • Wappapello is located in Wayne County
    • Jump to TripAdvisor's Tourism page for Wappapello <2>
  • McGee
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for McGee have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McGee
    • McGee is located in Wayne County
  • Gipsy
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Gipsy have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gipsy
    • Gipsy is located in Bollinger County
  • Redford
    (22 miles [35.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Redford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Redford
    • Redford is located in Reynolds County
  • Chloride
    (23 miles [37 km] to the north)
    • Jump to our Gazetteer entry for Chloride
    • Chloride is located in Iron County
  • Ellington
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Ellington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellington
    • Ellington is located in Reynolds County
    • Population from the 2020 Census: 915 people
    • Jump to TripAdvisor's Tourism page for Ellington <2>

The official website for State of Missouri: https://www.mo.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Julian Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.1264, Longitude: -90.5737       In this case, the coordinates for the Julian Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 06 Apr 2024