|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hammer Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hammer Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hammer Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Lampe
(2 miles [3.2 km] to the south)
- Coney Island
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for Coney Island
- Coney Island is located in Stone County
- Population from the 2020 Census: 76 people
- Kimberling City
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Kimberling City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kimberling City
- Kimberling City is located in Stone County
- Population from the 2020 Census: 2,331 people
- Jump to TripAdvisor's Tourism page for Kimberling City <2>
- Indian Point
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Indian Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Point
- Indian Point is located in Stone County
- Population from the 2020 Census: 530 people
- Jump to TripAdvisor's Tourism page for Indian Point <2>
- Blue Eye
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Blue Eye have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blue Eye
- Blue Eye is located in Stone County
- Population from the 2020 Census: 163 people
- Jump to TripAdvisor's Tourism page for Blue Eye <2>
- Silver Dollar City
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Silver Dollar City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver Dollar City
- Silver Dollar City is located in Stone County
- Blue Eye
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Blue Eye
- Blue Eye is located in Carroll County (AR)
- Population from the 2020 Census: 36 people
- Table Rock
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Table Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Table Rock
- Table Rock is located in Taney County
- Lakeview
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeview
- Lakeview is located in Stone County
- Branson West
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Branson West have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branson West
- Branson West is located in Stone County
- Population from the 2020 Census: 451 people
- Oasis ‑ Historic
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Oasis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oasis
- Oasis is located in Taney County
- Cape Fair
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Cape Fair have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cape Fair
- Cape Fair is located in Stone County
- Jump to TripAdvisor's Tourism page for Cape Fair <2>
- Branson
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Branson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branson
- Branson is located in Taney County
- Population from the 2020 Census: 11,687 people
- Jump to TripAdvisor's Tourism page for Branson <2>
- Reeds Spring
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Reeds Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reeds Spring
- Reeds Spring is located in Stone County
- Population from the 2020 Census: 876 people
- Jump to TripAdvisor's Tourism page for Reeds Spring <2>
- Polo ‑ Historic
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Polo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polo
- Polo is located in Carroll County (AR)
- Oak Grove
(10 miles [16.1 km] to the south)
- Shell Knob
(10 miles [16.1 km] to the west)
- Arrow Point
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Arrow Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arrow Point
- Arrow Point is located in Barry County
- Population from the 2020 Census: 87 people
- Hollister
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Hollister
- Hollister is located in Taney County
- Population from the 2020 Census: 4,607 people
- Melva ‑ Historic
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Melva
- Melva is located in Taney County
- Golden
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Golden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Golden
- Golden is located in Barry County
- Jump to TripAdvisor's Tourism page for Golden <2>
- McCord Bend
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for McCord Bend have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McCord Bend
- McCord Bend is located in Stone County
- Population from the 2020 Census: 304 people
- Ridgedale
(13 miles [20.9 km] to the southeast)
- Hill City
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Hill City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hill City
- Hill City is located in Barry County
- Galena
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Galena have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galena
- Galena is located in Stone County
- Population from the 2020 Census: 443 people
- Jump to TripAdvisor's Tourism page for Galena <2>
- Emerald Beach
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Emerald Beach have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Emerald Beach
- Emerald Beach is located in Barry County
- Population from the 2020 Census: 244 people
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hammer Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.6067, Longitude: -93.4319 In this case, the coordinates for the Hammer Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|