Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Dotson Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Dotson Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Dotson Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Brush Creek
(Less than 2 miles to the southeast)- Note: The GPS coordinates that we are using for Brush Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brush Creek
- Brush Creek is located in Laclede County
- Lebanon
(4 miles [6.4 km] to the northeast)- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Laclede County
- Population from the 2020 Census: 14,881 people
- Jump to TripAdvisor's Tourism page for Lebanon <3>
- Phillipsburg
(6 miles [9.7 km] to the southwest)- Note: The GPS coordinates that we are using for Phillipsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Phillipsburg
- Phillipsburg is located in Laclede County
- Population from the 2020 Census: 200 people
- Jump to TripAdvisor's Tourism page for Phillipsburg <3>
- Long Lane
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Long Lane
- Long Lane is located in Dallas County
- Evergreen
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Evergreen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in Laclede County
- Population from the 2020 Census: 28 people
- Evergreen has also been known as:
- Evergreen village
- Oakland
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Oakland
- Oakland is located in Laclede County
- Conway
(10 miles [16.1 km] to the southwest)- Jump to our Gazetteer entry for Conway
- Conway is located in Laclede County
- Population from the 2020 Census: 778 people
- Jump to TripAdvisor's Tourism page for Conway <3>
- Twin Bridges
(10 miles [16.1 km] to the southeast)- Note: The GPS coordinates that we are using for Twin Bridges came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Twin Bridges
- Twin Bridges is located in Laclede County
- Pease
(11 miles [17.7 km] to the southeast) - Sleeper
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Sleeper
- Sleeper is located in Laclede County
- Windyville
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Windyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Windyville
- Windyville is located in Dallas County
- Eldridge
(13 miles [20.9 km] to the north)- Jump to our Gazetteer entry for Eldridge
- Eldridge is located in Laclede County
- Jump to TripAdvisor's Tourism page for Eldridge <3>
- Stoutland
(16 miles [25.7 km] to the northeast)- Note: The GPS coordinates that we are using for Stoutland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoutland
- Stoutland is located in Camden County
- Population from the 2020 Census: 201 people
- Jump to TripAdvisor's Tourism page for Stoutland <3>
- Grovespring
(17 miles [27.4 km] to the south)- Jump to our Gazetteer entry for Grovespring
- Grovespring is located in Wright County
- Jump to TripAdvisor's Tourism page for Grovespring <3>
- Niangua
(18 miles [29 km] to the south) - Celt
(18 miles [29 km] to the northwest) - Decaturville
(18 miles [29 km] to the north)- Jump to our Gazetteer entry for Decaturville
- Decaturville is located in Camden County
- Leadmine
(18 miles [29 km] to the northwest)- Jump to our Gazetteer entry for Leadmine
- Leadmine is located in Dallas County
- Competition
(19 miles [30.6 km] to the southeast)- Jump to our Gazetteer entry for Competition
- Competition is located in Laclede County
- Falcon
(19 miles [30.6 km] to the east)- Note: The GPS coordinates that we are using for Falcon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Falcon
- Falcon is located in Laclede County
- Jump to TripAdvisor's Tourism page for Falcon <3>
- Buffalo
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Dallas County
- Population from the 2020 Census: 3,202 people
- Jump to TripAdvisor's Tourism page for Buffalo <3>
- Elkland
(21 miles [33.8 km] to the southwest) - White City
(21 miles [33.8 km] to the north)- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Camden County
- Jerktail ‑ Historic
(21 miles [33.8 km] to the southeast) - Tunas
(21 miles [33.8 km] to the northwest)
Off-the-Road Links ...
The official website for Laclede County: www.laclede.county.missouri.org/
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Dotson Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.6406, Longitude: -92.7305 In this case, the coordinates for the Dotson Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |