|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Dimmitt Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Dimmitt Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Dimmitt Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- New London
(4 miles [6.4 km] to the south)
- Hannibal
(4 miles [6.4 km] to the northeast)
- Cave City
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cave City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cave City
- Cave City is located in Marion County
- Rensselaer
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Rensselaer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rensselaer
- Rensselaer is located in Ralls County
- Population from the 2020 Census: 229 people
- Saverton
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Saverton
- Saverton is located in Ralls County
- Spencer
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Spencer
- Spencer is located in Pike County (IL)
- Dodge City
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Dodge City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dodge City
- Dodge City is located in Marion County
- Fall Creek
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Fall Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall Creek
- Fall Creek is located in Adams County (IL)
- Center
(11 miles [17.7 km] to the southwest)
- Palmyra
(11 miles [17.7 km] to the northwest)
- Frankford
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Frankford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frankford
- Frankford is located in Pike County
- Population from the 2020 Census: 314 people
- Jump to TripAdvisor's Tourism page for Frankford <2>
- Hull
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Hull have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hull
- Hull is located in Pike County (IL)
- Population from the 2020 Census: 421 people
- Jump to TripAdvisor's Tourism page for Hull <2>
- The Landing
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for The Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Landing
- The Landing is located in Ralls County
- Marblehead
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Marblehead
- Marblehead is located in Adams County (IL)
- Kinderhook
(14 miles [22.5 km] to the east)
- Payson
(14 miles [22.5 km] to the northeast)
- Ashburn
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Ashburn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashburn
- Ashburn is located in Pike County
- Population from the 2010 Census: 52 people
- Plainville
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Plainville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainville
- Plainville is located in Adams County (IL)
- Population from the 2020 Census: 253 people
- Jump to TripAdvisor's Tourism page for Plainville <2>
- Shaver Ford ‑ Historic
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Shaver Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shaver Ford
- Shaver Ford is located in Ralls County
- Monroe City
(16 miles [25.7 km] to the west)
- New Canton
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for New Canton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Canton
- New Canton is located in Pike County (IL)
- Population from the 2020 Census: 338 people
- Greenlawn
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Greenlawn
- Greenlawn is located in Ralls County
- Adams
(18 miles [29 km] to the northeast)
- Jump to our Gazetteer entry for Adams
- Adams is located in Adams County (IL)
- Burton
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Burton
- Burton is located in Adams County (IL)
- Quincy
(19 miles [30.6 km] to the north)
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Dimmitt Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.6542, Longitude: -91.4265 In this case, the coordinates for the Dimmitt Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|