|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Aldrich Valley Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Aldrich Valley Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Aldrich Valley Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Chicopee
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for Chicopee
- Chicopee is located in Carter County
- Van Buren
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Carter County
- Population from the 2020 Census: 798 people
- Jump to TripAdvisor's Tourism page for Van Buren <3>
- Ellsinore
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Ellsinore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellsinore
- Ellsinore is located in Carter County
- Population from the 2020 Census: 426 people
- Jump to TripAdvisor's Tourism page for Ellsinore <3>
- Grandin
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Grandin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grandin
- Grandin is located in Carter County
- Population from the 2020 Census: 231 people
- Fremont
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Fremont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fremont
- Fremont is located in Carter County
- Mill Spring
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Mill Spring
- Mill Spring is located in Wayne County
- Population from the 2020 Census: 175 people
- Bennett
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Bennett
- Bennett is located in Ripley County
- Piedmont
(17 miles [27.4 km] to the northeast)
- Ellington
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Ellington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellington
- Ellington is located in Reynolds County
- Population from the 2020 Census: 915 people
- Jump to TripAdvisor's Tourism page for Ellington <3>
- Williamsville
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Williamsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsville
- Williamsville is located in Wayne County
- Population from the 2020 Census: 327 people
- Jump to TripAdvisor's Tourism page for Williamsville <3>
- Winona
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Winona have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winona
- Winona is located in Shannon County
- Population from the 2020 Census: 1,296 people
- Jump to TripAdvisor's Tourism page for Winona <3>
- Fruit City
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Fruit City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fruit City
- Fruit City is located in Reynolds County
- Bardley
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Bardley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bardley
- Bardley is located in Ripley County
- Briar
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Briar have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Briar
- Briar is located in Ripley County
- Dees Town
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Dees Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dees Town
- Dees Town is located in Wayne County
- Redford
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Redford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redford
- Redford is located in Reynolds County
- Doniphan
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Doniphan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doniphan
- Doniphan is located in Ripley County
- Population from the 2020 Census: 1,919 people
- Jump to TripAdvisor's Tourism page for Doniphan <3>
- Patterson
(25 miles [40.2 km] to the northeast)
- Des Arc
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Des Arc
- Des Arc is located in Iron County
- Population from the 2020 Census: 162 people
- Eminence
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Eminence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eminence
- Eminence is located in Shannon County
- Population from the 2020 Census: 581 people
- Jump to TripAdvisor's Tourism page for Eminence <3>
- Ponder
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Ponder have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ponder
- Ponder is located in Ripley County
- Fairdealing
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Fairdealing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairdealing
- Fairdealing is located in Ripley County
- Vulcan
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Vulcan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vulcan
- Vulcan is located in Iron County
- Gatewood
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Gatewood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gatewood
- Gatewood is located in Ripley County
- Gamburg
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Gamburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gamburg
- Gamburg is located in Ripley County
- Greenville
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Wayne County
- Population from the 2020 Census: 455 people
- Jump to TripAdvisor's Tourism page for Greenville <3>
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Aldrich Valley Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.9762, Longitude: -90.9351 In this case, the coordinates for the Aldrich Valley Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|