TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Campbell. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Campbell.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Campbell - within 29 miles [46.7 km]<1>.
Our list sorts the communities in alphabetical order. There are 25 communities listed:
- Bernie
(13 miles [20.9 km] to the northeast)
- Bloomfield
(28 miles [45.1 km] to the north)
- Broseley
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Broseley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broseley
- Broseley is located in Butler County
- Jump to TripAdvisor's Tourism page for Broseley <2>
- Corning
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Corning have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corning
- Corning is located in Clay County (AR)
- Population from the 2020 Census: 3,019 people
- Jump to TripAdvisor's Tourism page for Corning <2>
- Dexter
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Dexter have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dexter
- Dexter is located in Stoddard County
- Population from the 2020 Census: 7,839 people
- Jump to TripAdvisor's Tourism page for Dexter <2>
- Fisk
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Fisk have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fisk
- Fisk is located in Butler County
- Population from the 2020 Census: 329 people
- Jump to TripAdvisor's Tourism page for Fisk <2>
- Gideon
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Gideon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gideon
- Gideon is located in New Madrid County
- Population from the 2020 Census: 952 people
- Jump to TripAdvisor's Tourism page for Gideon <2>
- Harviell
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Harviell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harviell
- Harviell is located in Butler County
- Jump to TripAdvisor's Tourism page for Harviell <2>
- Hayti
(25 miles [40.2 km] to the southeast)
- Holcomb
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Holcomb have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holcomb
- Holcomb is located in Dunklin County
- Population from the 2020 Census: 571 people
- Jump to TripAdvisor's Tourism page for Holcomb <2>
- Kennett
(17 miles [27.4 km] to the south)
- Lilbourn
(26 miles [41.8 km] to the east)
- Malden
(7 miles [11.3 km] to the northeast)
- Marmaduke
(27 miles [43.5 km] to the southwest)
- Marston
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Marston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marston
- Marston is located in New Madrid County
- Population from the 2020 Census: 441 people
- Jump to TripAdvisor's Tourism page for Marston <2>
- Neelyville
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Neelyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Neelyville
- Neelyville is located in Butler County
- Population from the 2020 Census: 470 people
- Jump to TripAdvisor's Tourism page for Neelyville <2>
- New Madrid
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for New Madrid have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Madrid
- New Madrid is located in New Madrid County
- Population from the 2020 Census: 2,765 people
- Jump to TripAdvisor's Tourism page for New Madrid <2>
- Piggott
(9 miles [14.5 km] to the southwest)
- Pollard
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Pollard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pollard
- Pollard is located in Clay County (AR)
- Population from the 2020 Census: 198 people
- Jump to TripAdvisor's Tourism page for Pollard <2>
- Poplar Bluff
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Poplar Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Poplar Bluff
- Poplar Bluff is located in Butler County
- Population from the 2020 Census: 16,807 people
- Jump to TripAdvisor's Tourism page for Poplar Bluff <2>
- Portageville
(21 miles [33.8 km] to the east)
- Rector
(19 miles [30.6 km] to the southwest)
- Risco
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Risco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Risco
- Risco is located in New Madrid County
- Population from the 2020 Census: 303 people
- Jump to TripAdvisor's Tourism page for Risco <2>
- Saint Francis
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint Francis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Francis
- Saint Francis is located in Clay County (AR)
- Population from the 2020 Census: 225 people
- Jump to TripAdvisor's Tourism page for Saint Francis <2>
- Steele
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Steele have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steele
- Steele is located in Pemiscot County
- Population from the 2020 Census: 1,853 people
- Jump to TripAdvisor's Tourism page for Steele <2>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Campbell. If you can help, please contact us through our Feedback Page.
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Campbell) to Point B.Our distance measurements begin at a specific point in Campbell. The point we use is located at these GPS coordinates - Latitude: 36.4923, Longitude: -90.0753 In this case, the coordinates for Campbell have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |