Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Blue Ridge had a population of 85 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Blue Ridge, with the one closest to Blue Ridge listed first.
- Madelaine ‑ Historic
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Madelaine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madelaine
- Madelaine is located in Daviess County
- Bolton
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Bolton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bolton
- Bolton is located in Harrison County
- Bancroft
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bancroft. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bancroft
- Bancroft is located in Daviess County
- Bethany
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Bethany have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethany
- Bethany is located in Harrison County
- Population from the 2020 Census: 3,049 people
- Jump to TripAdvisor's Tourism page for Bethany <4>
- Gardner
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Gardner. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gardner
- Gardner is located in Harrison County
- Mount Moriah
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Mount Moriah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Moriah
- Mount Moriah is located in Harrison County
- Population from the 2020 Census: 80 people
- Ridgeway
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Ridgeway have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ridgeway
- Ridgeway is located in Harrison County
- Population from the 2020 Census: 432 people
- Jump to TripAdvisor's Tourism page for Ridgeway <4>
- Pattonsburg
(12 miles [19.3 km] to the southwest)
- Matkins
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Matkins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Matkins
- Matkins is located in Harrison County
- Jameson
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Jameson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jameson
- Jameson is located in Daviess County
- Population from the 2020 Census: 127 people
- Jump to TripAdvisor's Tourism page for Jameson <4>
- Edinburg
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Edinburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edinburg
- Edinburg is located in Grundy County
- Shott
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Shott have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shott
- Shott is located in Grundy County
- Buttsville
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Buttsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buttsville
- Buttsville is located in Grundy County
- Dinsmore
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Dinsmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dinsmore
- Dinsmore is located in Mercer County
- New Hampton
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for New Hampton
- New Hampton is located in Harrison County
- Population from the 2020 Census: 270 people
- Brooklyn
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Brooklyn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooklyn
- Brooklyn is located in Harrison County
- Modena
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Modena
- Modena is located in Mercer County
- McFall
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for McFall
- McFall is located in Gentry County
- Population from the 2020 Census: 90 people
- Civil Bend
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Civil Bend have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Civil Bend
- Civil Bend is located in Daviess County
- Jamesport
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Jamesport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamesport
- Jamesport is located in Daviess County
- Population from the 2020 Census: 513 people
- Jump to TripAdvisor's Tourism page for Jamesport <4>
- Tindall
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Tindall. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tindall
- Tindall is located in Grundy County
- Population from the 2020 Census: 74 people
- Whitten
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Whitten have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitten
- Whitten is located in Gentry County
- Wabash Crossing
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Wabash Crossing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wabash Crossing
- Wabash Crossing is located in Daviess County
- Spickard
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Spickard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spickard
- Spickard is located in Grundy County
- Population from the 2020 Census: 236 people
- Jump to TripAdvisor's Tourism page for Spickard <4>
- Goshen
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Goshen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goshen
- Goshen is located in Mercer County
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Blue Ridge, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |