RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Hennepin County >> Tonka Bay >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Tonka Bay (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Tonka Bay. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Tonka Bay is located in Hennepin County.

To see how the shape of Minnesota's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Hennepin County: Anoka, Carver, Dakota, Ramsey, Scott, Sherburne & Wright.

Below are the counties that are near Tonka Bay. For each of these counties, we show a sample of those communities that are closest to Tonka Bay:

  • Hennepin County     (The home county of Tonka Bay)
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Shorewood
      (Less than 2 miles to the east)
      • Note: The GPS coordinates that we are using for Shorewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shorewood
      • Shorewood is located in Hennepin County
      • Population from the 2020 Census: 8,098 people
      • Jump to TripAdvisor's Tourism page for Shorewood <2>
    • Greenwood
      (Less than 2 miles to the east)
      • Note: The GPS coordinates that we are using for Greenwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greenwood
      • Greenwood is located in Hennepin County
      • Population from the 2020 Census: 937 people
    • Minnetonka Beach
      (Less than 2 miles to the north)
      • Note: The GPS coordinates that we are using for Minnetonka Beach have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Minnetonka Beach
      • Minnetonka Beach is located in Hennepin County
      • Population from the 2020 Census: 584 people
    • Excelsior
      (Less than 2 miles to the southeast)
    • Crystal Bay
      (2 miles [3.2 km] to the north)
      • Note: The GPS coordinates that we are using for Crystal Bay have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crystal Bay
      • Crystal Bay is located in Hennepin County
    • Spring Park
      (2 miles [3.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Spring Park have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spring Park
      • Spring Park is located in Hennepin County
      • Population from the 2020 Census: 1,761 people
      • Jump to TripAdvisor's Tourism page for Spring Park <2>
    • Deephaven
      (3 miles [4.8 km] to the east)
      • Note: The GPS coordinates that we are using for Deephaven have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Deephaven
      • Deephaven is located in Hennepin County
      • Population from the 2020 Census: 3,898 people
      • Jump to TripAdvisor's Tourism page for Deephaven <2>
    • Orono
      (3 miles [4.8 km] to the north)
      • Note: The GPS coordinates that we are using for Orono have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orono
      • Orono is located in Hennepin County
      • Population from the 2020 Census: 8,348 people
    • Mound
      (3 miles [4.8 km] to the west)
      • Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mound
      • Mound is located in Hennepin County
      • Population from the 2020 Census: 9,404 people
      • Jump to TripAdvisor's Tourism page for Mound <2>
    • Long Lake
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for Long Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Long Lake
      • Long Lake is located in Hennepin County
      • Population from the 2020 Census: 1,792 people
      • Jump to TripAdvisor's Tourism page for Long Lake <2>
    • Woodland
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Woodland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodland
      • Woodland is located in Hennepin County
      • Population from the 2020 Census: 487 people
    • Minnetrista
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Minnetrista have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Minnetrista
      • Minnetrista is located in Hennepin County
      • Population from the 2020 Census: 8,505 people
      • Jump to TripAdvisor's Tourism page for Minnetrista <2>
  • Anoka County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Columbia Heights
      (19 miles [30.6 km] to the northeast)
    • Fridley
      (19 miles [30.6 km] to the northeast)
    • Hilltop
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hilltop have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hilltop
      • Hilltop is located in Anoka County
      • Population from the 2020 Census: 764 people
    • Anoka
      (21 miles [33.8 km] to the northeast)
    • Coon Creek
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Coon Creek
      • Coon Creek is located in Anoka County
    • Spring Lake Park
      (21 miles [33.8 km] to the northeast)
    • Coon Rapids
      (22 miles [35.4 km] to the northeast)
    • Ramsey
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Ramsey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ramsey
      • Ramsey is located in Anoka County
      • Population from the 2020 Census: 28,523 people
      • Jump to TripAdvisor's Tourism page for Ramsey <2>
    • Blaine
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Blaine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blaine
      • Blaine is located in Anoka County
      • Population from the 2020 Census: 66,697 people
      • Jump to TripAdvisor's Tourism page for Blaine <2>
    • Lexington
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lexington
      • Lexington is located in Anoka County
      • Population from the 2020 Census: 2,655 people
      • Jump to TripAdvisor's Tourism page for Lexington <2>
    • Andover
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Andover
      • Andover is located in Anoka County
      • Population from the 2020 Census: 33,448 people
      • Jump to TripAdvisor's Tourism page for Andover <2>
    • Circle Pines
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Circle Pines have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Circle Pines
      • Circle Pines is located in Anoka County
      • Population from the 2020 Census: 4,928 people
      • Jump to TripAdvisor's Tourism page for Circle Pines <2>
  • Carver County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Chanhassen
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Chanhassen have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chanhassen
      • Chanhassen is located in Carver County
      • Population from the 2020 Census: 26,546 people
      • Jump to TripAdvisor's Tourism page for Chanhassen <2>
    • Victoria
      (4 miles [6.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Victoria
      • Victoria is located in Carver County
      • Population from the 2020 Census: 10,667 people
      • Jump to TripAdvisor's Tourism page for Victoria <2>
    • Hazeltine
      (5 miles [8 km] to the south)
      • Jump to our Gazetteer entry for Hazeltine
      • Hazeltine is located in Carver County
    • Chaska
      (8 miles [12.9 km] to the south)
    • Carver
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Carver have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carver
      • Carver is located in Carver County
      • Population from the 2020 Census: 5,863 people
      • Jump to TripAdvisor's Tourism page for Carver <2>
    • Dahlgren
      (10 miles [16.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dahlgren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dahlgren
      • Dahlgren is located in Carver County
    • Waconia
      (11 miles [17.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Waconia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waconia
      • Waconia is located in Carver County
      • Population from the 2020 Census: 12,415 people
      • Jump to TripAdvisor's Tourism page for Waconia <2>
    • Watertown
      (13 miles [20.9 km] to the west)
    • Cologne
      (14 miles [22.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cologne have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cologne
      • Cologne is located in Carver County
      • Population from the 2020 Census: 1,860 people
      • Jump to TripAdvisor's Tourism page for Cologne <2>
    • Hydes Lake
      (14 miles [22.5 km] to the southwest)
      • Jump to our Gazetteer entry for Hydes Lake
      • Hydes Lake is located in Carver County
    • Mayer
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Mayer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mayer
      • Mayer is located in Carver County
      • Population from the 2020 Census: 2,320 people
      • Jump to TripAdvisor's Tourism page for Mayer <2>
    • Gotha
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gotha have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gotha
      • Gotha is located in Carver County
  • Dakota County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Burnsville
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Burnsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burnsville
      • Burnsville is located in Dakota County
      • Population from the 2020 Census: 62,170 people
      • Jump to TripAdvisor's Tourism page for Burnsville <2>
    • Nicols
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Nicols have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nicols
      • Nicols is located in Dakota County
    • Mendota
      (20 miles [32.2 km] to the east)
    • Eagan
      (21 miles [33.8 km] to the east)
      • Jump to our Gazetteer entry for Eagan
      • Eagan is located in Dakota County
      • Population from the 2020 Census: 65,975 people
      • Jump to TripAdvisor's Tourism page for Eagan <2>
    • Lilydale
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Lilydale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lilydale
      • Lilydale is located in Dakota County
      • Population from the 2020 Census: 838 people
    • Mendota Heights
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Mendota Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mendota Heights
      • Mendota Heights is located in Dakota County
      • Population from the 2020 Census: 11,433 people
      • Jump to TripAdvisor's Tourism page for Mendota Heights <2>
    • Apple Valley
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Apple Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Apple Valley
      • Apple Valley is located in Dakota County
      • Population from the 2020 Census: 54,847 people
      • Jump to TripAdvisor's Tourism page for Apple Valley <2>
    • West Saint Paul
      (23 miles [37 km] to the east)
    • Sunfish Lake
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Sunfish Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sunfish Lake
      • Sunfish Lake is located in Dakota County
      • Population from the 2020 Census: 551 people
      • Jump to TripAdvisor's Tourism page for Sunfish Lake <2>
    • Lakeville
      (25 miles [40.2 km] to the southeast)
    • Inver Grove Heights
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Inver Grove Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Inver Grove Heights
      • Inver Grove Heights is located in Dakota County
      • Population from the 2020 Census: 35,776 people
      • Jump to TripAdvisor's Tourism page for Inver Grove Heights <2>
    • South Saint Paul
      (27 miles [43.5 km] to the east)
  • Le Sueur County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Heidelberg
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Heidelberg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Heidelberg
      • Heidelberg is located in Le Sueur County
      • Population from the 2020 Census: 122 people
    • Saint Thomas
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Saint Thomas
      • Saint Thomas is located in Le Sueur County
  • McLeod County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Lester Prairie
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Lester Prairie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lester Prairie
      • Lester Prairie is located in McLeod County
      • Population from the 2020 Census: 1,724 people
      • Jump to TripAdvisor's Tourism page for Lester Prairie <2>
    • Winsted
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Winsted have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Winsted
      • Winsted is located in McLeod County
      • Population from the 2020 Census: 2,230 people
      • Jump to TripAdvisor's Tourism page for Winsted <2>
    • Plato
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Plato have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plato
      • Plato is located in McLeod County
      • Population from the 2020 Census: 303 people
      • Jump to TripAdvisor's Tourism page for Plato <2>
    • Glencoe
      (29 miles [46.7 km] to the west)
    • Silver Lake
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Silver Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver Lake
      • Silver Lake is located in McLeod County
      • Population from the 2020 Census: 806 people
      • Jump to TripAdvisor's Tourism page for Silver Lake <2>
  • Ramsey County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Lauderdale
      (19 miles [30.6 km] to the east)
      • Note: The GPS coordinates that we are using for Lauderdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lauderdale
      • Lauderdale is located in Ramsey County
      • Population from the 2020 Census: 2,484 people
    • Falcon Heights
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Falcon Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Falcon Heights
      • Falcon Heights is located in Ramsey County
      • Population from the 2020 Census: 5,628 people
      • Jump to TripAdvisor's Tourism page for Falcon Heights <2>
    • New Brighton
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for New Brighton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Brighton
      • New Brighton is located in Ramsey County
      • Population from the 2020 Census: 22,793 people
      • Jump to TripAdvisor's Tourism page for New Brighton <2>
    • Roseville
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Roseville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roseville
      • Roseville is located in Ramsey County
      • Population from the 2020 Census: 36,178 people
      • Jump to TripAdvisor's Tourism page for Roseville <2>
    • Mounds View
      (22 miles [35.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mounds View have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mounds View
      • Mounds View is located in Ramsey County
      • Population from the 2020 Census: 13,446 people
      • Jump to TripAdvisor's Tourism page for Mounds View <2>
    • Arden Hills
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Arden Hills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arden Hills
      • Arden Hills is located in Ramsey County
      • Population from the 2020 Census: 10,196 people
      • Jump to TripAdvisor's Tourism page for Arden Hills <2>
    • Saint Paul
      (24 miles [38.6 km] to the east)
    • Little Canada
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Little Canada have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Little Canada
      • Little Canada is located in Ramsey County
      • Population from the 2020 Census: 10,335 people
      • Jump to TripAdvisor's Tourism page for Little Canada <2>
    • Cardigan Junction
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cardigan Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cardigan Junction
      • Cardigan Junction is located in Ramsey County
    • Shoreview
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Shoreview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shoreview
      • Shoreview is located in Ramsey County
      • Population from the 2020 Census: 27,092 people
      • Jump to TripAdvisor's Tourism page for Shoreview <2>
    • Vadnais Heights
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Vadnais Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vadnais Heights
      • Vadnais Heights is located in Ramsey County
      • Population from the 2020 Census: 13,796 people
      • Jump to TripAdvisor's Tourism page for Vadnais Heights <2>
    • North Oaks
      (27 miles [43.5 km] to the northeast)
  • Rice County
  • Scott County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Shakopee
      (11 miles [17.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Shakopee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shakopee
      • Shakopee is located in Scott County
      • Population from the 2020 Census: 43,020 people
      • Jump to TripAdvisor's Tourism page for Shakopee <2>
    • Marystown
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Marystown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marystown
      • Marystown is located in Scott County
    • Prior Lake
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Prior Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prior Lake
      • Prior Lake is located in Scott County
      • Population from the 2020 Census: 27,317 people
      • Jump to TripAdvisor's Tourism page for Prior Lake <2>
    • Savage
      (15 miles [24.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Savage have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Savage
      • Savage is located in Scott County
      • Population from the 2020 Census: 32,858 people
      • Jump to TripAdvisor's Tourism page for Savage <2>
    • Jordan
      (17 miles [27.4 km] to the south)
    • Credit River
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Credit River have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Credit River
      • Credit River is located in Scott County
    • Saint Patrick
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Saint Patrick
      • Saint Patrick is located in Scott County
    • Belle Plaine
      (22 miles [35.4 km] to the southwest)
    • Cedar Lake
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Cedar Lake
      • Cedar Lake is located in Scott County
    • New Prague
      (25 miles [40.2 km] to the south)
    • Union Hill
      (25 miles [40.2 km] to the south)
      • Jump to our Gazetteer entry for Union Hill
      • Union Hill is located in Scott County
    • New Market
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for New Market have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Market
      • New Market is located in Scott County
      • Jump to TripAdvisor's Tourism page for New Market <2>
  • Sherburne County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Elk River
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Elk River have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elk River
      • Elk River is located in Sherburne County
      • Population from the 2020 Census: 25,601 people
      • Jump to TripAdvisor's Tourism page for Elk River <2>
    • Big Lake
      (29 miles [46.7 km] to the north)
  • Sibley County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Green Isle
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Green Isle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Green Isle
      • Green Isle is located in Sibley County
      • Population from the 2020 Census: 552 people
      • Jump to TripAdvisor's Tourism page for Green Isle <2>
    • Henderson
      (30 miles [48.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Henderson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Henderson
      • Henderson is located in Sibley County
      • Population from the 2020 Census: 920 people
      • Jump to TripAdvisor's Tourism page for Henderson <2>
  • Washington County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Newport
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newport
      • Newport is located in Washington County
      • Population from the 2020 Census: 4,138 people
      • Jump to TripAdvisor's Tourism page for Newport <2>
    • Saint Paul Park
      (29 miles [46.7 km] to the east)
    • Landfall
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Landfall have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Landfall
      • Landfall is located in Washington County
      • Population from the 2020 Census: 733 people
    • Oakdale
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Oakdale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oakdale
      • Oakdale is located in Washington County
      • Population from the 2020 Census: 27,773 people
      • Jump to TripAdvisor's Tourism page for Oakdale <2>
  • Wright County
    • The following are listed by their distance from Tonka Bay, with the one closest to Tonka Bay listed first.
    • Delano
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Delano have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Delano
      • Delano is located in Wright County
      • Population from the 2020 Census: 6,353 people
      • Jump to TripAdvisor's Tourism page for Delano <2>
    • Rockford
      (14 miles [22.5 km] to the northwest)
    • Hanover
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hanover
      • Hanover is located in Wright County
      • Population from the 2020 Census: 3,524 people
      • Jump to TripAdvisor's Tourism page for Hanover <2>
    • Montrose
      (18 miles [29 km] to the northwest)
    • Saint Michael
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Saint Michael have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Michael
      • Saint Michael is located in Wright County
      • Population from the 2020 Census: 18,437 people
      • Jump to TripAdvisor's Tourism page for Saint Michael <2>
    • Waverly
      (21 miles [33.8 km] to the northwest)
    • Albertville
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Albertville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Albertville
      • Albertville is located in Wright County
      • Population from the 2020 Census: 7,547 people
      • Jump to TripAdvisor's Tourism page for Albertville <2>
    • Buffalo
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buffalo
      • Buffalo is located in Wright County
      • Population from the 2020 Census: 16,853 people
      • Jump to TripAdvisor's Tourism page for Buffalo <2>
    • Otsego
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Otsego have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Otsego
      • Otsego is located in Wright County
      • Population from the 2020 Census: 18,887 people
      • Jump to TripAdvisor's Tourism page for Otsego <2>
    • Howard Lake
      (25 miles [40.2 km] to the northwest)
    • Rassat
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Rassat
      • Rassat is located in Wright County
    • Monticello
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Monticello have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Monticello
      • Monticello is located in Wright County
      • Population from the 2020 Census: 13,893 people
      • Jump to TripAdvisor's Tourism page for Monticello <2>

For an expanded list of the communities that are closest to Tonka Bay, see our County-by-County Page for Tonka Bay.

Newspapers Published in Tonka Bay ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 404 newspapers that have been published in the area around Tonka Bay.

Although we're unaware of any newspapers that were published in the immediate area of Tonka Bay, there are papers which were published within 22 miles [35.4 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Tonka Bay.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Tonka Bay:

Cemeteries Near Tonka Bay ...

Below are cemeteries that are in the vicinity of Tonka Bay.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Tonka Bay covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Tonka Bay, with the one closest to Tonka Bay listed first.

  • Oak Hill Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Oak Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Oak Hill Cemetery
  • Woodside Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Woodside Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Woodside Cemetery
  • Resurrection Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Resurrection Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Resurrection Cemetery
  • Maxwell Family Cemetery
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for the Maxwell Family Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Maxwell Family Cemetery
  • Aspden Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Aspden Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Aspden Cemetery
  • St. Hubert's Cemetery
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for the St. Hubert's Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Hubert's Cemetery
  • Summit Park Cemetery
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Summit Park Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Summit Park Cemetery
  • St. Georges Cemetery
    (4 miles [6.4 km] to the north)
  • Union Cemetery
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Union Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Union Cemetery
  • Mound Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Mound Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mound Cemetery
  • Halsted Family Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Halsted Family Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Halsted Family Cemetery
  • Lake Auburn Moravian Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Lake Auburn Moravian Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lake Auburn Moravian Cemetery
  • Continue List   (301 more) ...
    • St. Victoria Cemetery
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for the St. Victoria Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the St. Victoria Cemetery
    • Greenlawn Cemetery
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Greenlawn Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Greenlawn Cemetery
    • Long Lake Cemetery
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for the Long Lake Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Long Lake Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

While we didn't find Tonka Bay in the Atlas, the following 1895 communities would have been found near the current location of Tonka Bay.

These communities are listed based on their distance from Tonka Bay, with the one closest to Tonka Bay listed first.

  • Excelsior
    (Less than 2 miles to the southeast)
  • Minnetonka Beach
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Minnetonka Beach have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Minnetonka Beach
    • Minnetonka Beach is located in Hennepin County
    • Population from the 2020 Census: 584 people
  • Spring Park
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Spring Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Park
    • Spring Park is located in Hennepin County
    • Population from the 2020 Census: 1,761 people
    • Jump to TripAdvisor's Tourism page for Spring Park <2>
  • Victoria
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Victoria
    • Victoria is located in Carver County
    • Population from the 2020 Census: 10,667 people
    • Jump to TripAdvisor's Tourism page for Victoria <2>
  • Chanhassen
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Chanhassen have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chanhassen
    • Chanhassen is located in Carver County
    • Population from the 2020 Census: 26,546 people
    • Jump to TripAdvisor's Tourism page for Chanhassen <2>
  • Woodland
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Woodland have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodland
    • Woodland is located in Hennepin County
    • Population from the 2020 Census: 487 people
  • Long Lake
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Long Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Long Lake
    • Long Lake is located in Hennepin County
    • Population from the 2020 Census: 1,792 people
    • Jump to TripAdvisor's Tourism page for Long Lake <2>
  • Hazeltine
    (5 miles [8 km] to the south)
    • Jump to our Gazetteer entry for Hazeltine
    • Hazeltine is located in Carver County
  • Wayzata
    (5 miles [8 km] to the northeast)
  • Minnetrista
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Minnetrista have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Minnetrista
    • Minnetrista is located in Hennepin County
    • Population from the 2020 Census: 8,505 people
    • Jump to TripAdvisor's Tourism page for Minnetrista <2>
  • Minnetonka
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Minnetonka have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Minnetonka
    • Minnetonka is located in Hennepin County
    • Population from the 2020 Census: 55,370 people
    • Jump to TripAdvisor's Tourism page for Minnetonka <2>
  • Eden Prairie
    (7 miles [11.3 km] to the southeast)
  • Continue List   (13 more) ...
    • Minnetonka Mills
      (7 miles [11.3 km] to the east)
      • Jump to our Gazetteer entry for Minnetonka Mills
      • Minnetonka Mills is located in Hennepin County
    • Maple Plain
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Maple Plain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maple Plain
      • Maple Plain is located in Hennepin County
      • Population from the 2020 Census: 2,102 people
      • Jump to TripAdvisor's Tourism page for Maple Plain <2>
    • Ditter
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Ditter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ditter
      • Ditter is located in Hennepin County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Tonka Bay. See our List of 1890's Communities around Tonka Bay.

Unfortunately, we don't know of a website for Tonka Bay. If you can help, please contact us through our Feedback Page.

The official website for Hennepin County: www.hennepin.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Tonka Bay) to Point B.Our distance measurements begin at a specific point in Tonka Bay. The point we use is located at these GPS coordinates - Latitude: 44.9155, Longitude: -93.5896       In this case, the coordinates for Tonka Bay have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tonka Bay, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024