Census Data for Mounds View
Population ...
The most recent Census Estimate<1> was for 2019 and it gave Mounds View a population of 13,304 people.
The last Decennial Census<2> was in 2010, which gave Mounds View a population of 12,155 people.
The city of Mounds View is located in Ramsey County. The 2010 Census gave Ramsey County; a population of 508,640 people. This means that Mounds View had 2.39% of the county's total population, making it Ramsey's 8th most populous community.
At the same time, Minnesota had a population of 5,303,925 people, meaning that Mounds View had 0.23% of the total population of Minnesota - making it the state's 84th most populous community.
Area ...
The 2010 Census shows that the sampling area for Mounds View has a total area of 4.12 square miles [10.7 km²]. Of this total, 4.03 square miles [10.4 km²] is land, with the balance (2.28%) being water (0.09 square miles [0.2 km²]).
Ramsey County has a land area of 152.2 square miles [394.2 km²]. At 4.03 square miles [10.4 km²], Mounds View has 2.64% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a city like Mounds View, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
- Things like population, area and housing for Mounds View reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Mounds View might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 45° 6' 24" (or 45.11°)
- Lon: -93° 12' 24" (or -93.21°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Mounds View had 5,221 Housing Units<3> and with its population of 12,155 people, this averages 2.33 people per Housing Unit.
- Continue Reading ...
- The 2010 Census shows Mounds View had a land area of 4.03 square miles [10.4 km²]. This translates to 1,267 Housing Units per square mile [489.3 housing units/km²].
- From the Census of 2000: Mounds View had 5,130 Housing Units, a population of 12,738 people and a land area of 4.11 square miles [10.7 km²]. This gives a density of 2.48 people per Housing Unit and 1,240 Housing Units per square mile [479 housing units/km²].
- Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 and the 2000 Census, there were changes in the sampling area for Mounds View and you need to be careful when comparing numbers between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).
Ramsey County ...
The community of Mounds View<4> is located in Ramsey County<5>.
The county had a population of 508,640 people at the 2010 Census. With it's population of 12,155 people, Mounds View represented 2.39% of the county's total.
In addition, where the city of Mounds View has a population density of 2,950 people per square mile [1,139 people/km²], Ramsey County averages 3,341 people per square mile [1,290 people/km²].
For more information, please visit our Census Page for Ramsey County.
Census-to-Census Observations ...
Introduction ...
When the Census Bureau takes a census count (or enumeration) for Mounds View, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Mounds View. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for Mounds View or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
Location ...
While generally coinciding with the GPS location (latitude/longitude) of Mounds View, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Mounds View.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 45.106737° (or 45°6'24" N)
- Lon: -93.206834° (or -93°12'24" W)
- For the 2000 Census, the location given was:
- Lat: 45.104732° (or 45°6'17" N)
- Lon: -93.206188° (or -93°12'22" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 749 feet to the north<6> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2395118) to Mounds View. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Mounds View. The GNIS point has been mapped to the latitude/longitude:
- Lat: 45.107112° (or 45°6'25" N)
- Lon: -93.207699° (or -93°12'27" W)
- The GPS location given for the 2010 Census lies 261.2 feet to the southeast<7> of the point given by the GNIS for Mounds View. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Mounds View.
Miscellaneous Information for Mounds View ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Ramsey County or the city of Mounds View:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 27 (Minnesota)
- County Code: 123 (Ramsey County)
- Place Code: 44530 (Mounds View)
- State & County Code: 27/123 (Minnesota / Ramsey County)
- State & Place Code: 27/44530 (Minnesota / Mounds View)
- Misc. Census Codes ...
- Mounds View is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Mounds View.
Off-the-Road Links ...
The official website for Mounds View: www.ci.mounds-view.mn.us/
The official website for Ramsey County: www.co.ramsey.mn.us/
The official website for State of Minnesota: https://mn.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019. |
| <2> | Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020. |
| <3> | A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway). |
| <4> | It's a common practice for mapmakers to remove the apostrophe from possessive names. So Mounds View may originally have been Mound's View. Sometimes the trailing 's' might be dropped altogether, in which case Mounds View might be written as Mound View. For more information, please visit our Genealogy Helper Page for Mounds View. |
| <5> | If you're interested in how the shape of Minnesota's counties, including Ramsey, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <6> | The calculated bearing (or angle) to the 2010 Census location is 12 degrees and a distance of 749 feet. |
| <7> | The calculated bearing (or angle) to the GNIS point is 238 degrees and a distance of 261.2 feet. |