RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> Meeker County >> Lamson >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Lamson in the Atlas, the following communities of the 1890's would have been found near the current location of Lamson. The following communities are listed based on their distance, with the one closest to Lamson listed first.

  • Dassel
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Dassel have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dassel
    • Dassel is located in Meeker County
    • Population from the 2020 Census: 1,472 people
    • Jump to TripAdvisor's Tourism page for Dassel <3>
  • Silver Lake
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Silver Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silver Lake
    • Silver Lake is located in McLeod County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Silver Lake <3>
  • Cokato
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cokato have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cokato
    • Cokato is located in Wright County
    • Population from the 2020 Census: 2,734 people
    • Jump to TripAdvisor's Tourism page for Cokato <3>
  • Hutchinson
    (8 miles [12.9 km] to the southwest)
  • Smith Lake
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Smith Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smith Lake
    • Smith Lake is located in Wright County
  • Darwin
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Darwin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Darwin
    • Darwin is located in Meeker County
    • Population from the 2020 Census: 355 people
    • Jump to TripAdvisor's Tourism page for Darwin <3>
  • Howard Lake
    (10 miles [16.1 km] to the northeast)
  • Greenleaf
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Greenleaf have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenleaf
    • Greenleaf is located in Meeker County
  • Biscay
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Biscay have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Biscay
    • Biscay is located in McLeod County
    • Population from the 2020 Census: 109 people
  • Winsted
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Winsted have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winsted
    • Winsted is located in McLeod County
    • Population from the 2020 Census: 2,230 people
    • Jump to TripAdvisor's Tourism page for Winsted <3>
  • Cedar Mills
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Cedar Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Mills
    • Cedar Mills is located in Meeker County
    • Population from the 2020 Census: 51 people
  • Lester Prairie
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lester Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lester Prairie
    • Lester Prairie is located in McLeod County
    • Population from the 2020 Census: 1,724 people
    • Jump to TripAdvisor's Tourism page for Lester Prairie <3>
  • Kingston
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Kingston have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kingston
    • Kingston is located in Meeker County
    • Population from the 2020 Census: 162 people
  • Hollywood
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Hollywood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hollywood
    • Hollywood is located in Carver County
  • Waverly
    (15 miles [24.1 km] to the east)
  • Litchfield
    (15 miles [24.1 km] to the northwest)
  • Glencoe
    (16 miles [25.7 km] to the southeast)
  • New Germany
    (16 miles [25.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Germany have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Germany
    • New Germany is located in Carver County
    • Population from the 2020 Census: 422 people
    • Jump to TripAdvisor's Tourism page for New Germany <3>
  • Lakeside
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lakeside have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeside
    • Lakeside is located in Renville County
  • Sumter
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Sumter have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sumter
    • Sumter is located in McLeod County
  • Forest City
    (17 miles [27.4 km] to the northwest)
    • Jump to our Gazetteer entry for Forest City
    • Forest City is located in Meeker County
  • Brownton
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Brownton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brownton
    • Brownton is located in McLeod County
    • Population from the 2020 Census: 711 people
    • Jump to TripAdvisor's Tourism page for Brownton <3>
  • Plato
    (18 miles [29 km] to the southeast)
    • Note: The GPS coordinates that we are using for Plato have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plato
    • Plato is located in McLeod County
    • Population from the 2020 Census: 303 people
    • Jump to TripAdvisor's Tourism page for Plato <3>
  • Montrose
    (18 miles [29 km] to the east)
  • Cosmos
    (20 miles [32.2 km] to the west)
    • Note: The GPS coordinates that we are using for Cosmos have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cosmos
    • Cosmos is located in Meeker County
    • Population from the 2020 Census: 448 people
    • Jump to TripAdvisor's Tourism page for Cosmos <3>
  • Mayer
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Mayer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mayer
    • Mayer is located in Carver County
    • Population from the 2020 Census: 2,320 people
    • Jump to TripAdvisor's Tourism page for Mayer <3>
  • Watertown
    (20 miles [32.2 km] to the east)
  • Annandale
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Annandale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Annandale
    • Annandale is located in Wright County
    • Population from the 2020 Census: 3,546 people
    • Jump to TripAdvisor's Tourism page for Annandale <3>

The official website for Meeker County: www.co.meeker.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lamson, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024