RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Minnesota >> McLeod County >> Heatwole >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Minnesota

The Commemorative Quarter for Minnesota





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Heatwole in the Atlas, the following communities of the 1890's would have been found near the current location of Heatwole. The following communities are listed based on their distance, with the one closest to Heatwole listed first.

  • Hutchinson
    (4 miles [6.4 km] to the north)
  • Biscay
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Biscay have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Biscay
    • Biscay is located in McLeod County
    • Population from the 2020 Census: 109 people
  • Brownton
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Brownton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brownton
    • Brownton is located in McLeod County
    • Population from the 2020 Census: 711 people
    • Jump to TripAdvisor's Tourism page for Brownton <2>
  • Lakeside
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Lakeside have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeside
    • Lakeside is located in Renville County
  • Stewart
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Stewart have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stewart
    • Stewart is located in McLeod County
    • Population from the 2020 Census: 533 people
  • Sumter
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sumter have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sumter
    • Sumter is located in McLeod County
  • Cedar Mills
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cedar Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Mills
    • Cedar Mills is located in Meeker County
    • Population from the 2020 Census: 51 people
  • Silver Lake
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Silver Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silver Lake
    • Silver Lake is located in McLeod County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Silver Lake <2>
  • Buffalo Lake
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Buffalo Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buffalo Lake
    • Buffalo Lake is located in Renville County
    • Population from the 2020 Census: 678 people
    • Jump to TripAdvisor's Tourism page for Buffalo Lake <2>
  • Greenleaf
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Greenleaf have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenleaf
    • Greenleaf is located in Meeker County
  • New Auburn
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Auburn have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Auburn
    • New Auburn is located in Sibley County
    • Population from the 2020 Census: 427 people
    • Jump to TripAdvisor's Tourism page for New Auburn <2>
  • Glencoe
    (13 miles [20.9 km] to the east)
  • Hector
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hector have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hector
    • Hector is located in Renville County
    • Population from the 2020 Census: 1,041 people
    • Jump to TripAdvisor's Tourism page for Hector <2>
  • Cosmos
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cosmos have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cosmos
    • Cosmos is located in Meeker County
    • Population from the 2020 Census: 448 people
    • Jump to TripAdvisor's Tourism page for Cosmos <2>
  • Dassel
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Dassel have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dassel
    • Dassel is located in Meeker County
    • Population from the 2020 Census: 1,472 people
    • Jump to TripAdvisor's Tourism page for Dassel <2>
  • Darwin
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Darwin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Darwin
    • Darwin is located in Meeker County
    • Population from the 2020 Census: 355 people
    • Jump to TripAdvisor's Tourism page for Darwin <2>
  • Plato
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Plato have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plato
    • Plato is located in McLeod County
    • Population from the 2020 Census: 303 people
    • Jump to TripAdvisor's Tourism page for Plato <2>
  • Lester Prairie
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Lester Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lester Prairie
    • Lester Prairie is located in McLeod County
    • Population from the 2020 Census: 1,724 people
    • Jump to TripAdvisor's Tourism page for Lester Prairie <2>
  • Winsted
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Winsted have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winsted
    • Winsted is located in McLeod County
    • Population from the 2020 Census: 2,230 people
    • Jump to TripAdvisor's Tourism page for Winsted <2>
  • Cokato
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cokato have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cokato
    • Cokato is located in Wright County
    • Population from the 2020 Census: 2,734 people
    • Jump to TripAdvisor's Tourism page for Cokato <2>
  • Winthrop
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Winthrop have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winthrop
    • Winthrop is located in Sibley County
    • Population from the 2020 Census: 1,323 people
    • Jump to TripAdvisor's Tourism page for Winthrop <2>
  • Rosendale
    (20 miles [32.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rosendale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rosendale
    • Rosendale is located in Meeker County
  • Gibbon
    (21 miles [33.8 km] to the south)
    • Note: The GPS coordinates that we are using for Gibbon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gibbon
    • Gibbon is located in Sibley County
    • Population from the 2020 Census: 740 people
    • Jump to TripAdvisor's Tourism page for Gibbon <2>
  • Litchfield
    (21 miles [33.8 km] to the north)
  • Gaylord
    (21 miles [33.8 km] to the southeast)
  • Green Isle
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Green Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Green Isle
    • Green Isle is located in Sibley County
    • Population from the 2020 Census: 552 people
    • Jump to TripAdvisor's Tourism page for Green Isle <2>
  • New Germany
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for New Germany have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Germany
    • New Germany is located in Carver County
    • Population from the 2020 Census: 422 people
    • Jump to TripAdvisor's Tourism page for New Germany <2>
  • Hollywood
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Hollywood have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hollywood
    • Hollywood is located in Carver County
  • Smith Lake
    (21 miles [33.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Smith Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smith Lake
    • Smith Lake is located in Wright County

The official website for McLeod County: www.co.mcleod.mn.us/

The official website for State of Minnesota: https://mn.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Heatwole, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024