|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Zion Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Zion Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Zion Cemetery. We've listed the following communities based on their distance, with the closest first.
- Elgin
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Elgin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elgin
- Elgin is located in Wabasha County
- Population from the 2020 Census: 1,080 people
- Jump to TripAdvisor's Tourism page for Elgin <3>
- Hammond
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Hammond
- Hammond is located in Wabasha County
- Population from the 2020 Census: 167 people
- Viola
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Viola
- Viola is located in Olmsted County
- Jarrett
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Jarrett. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jarrett
- Jarrett is located in Wabasha County
- Millville
(7 miles [11.3 km] to the north)
- Plainview
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Plainview. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Wabasha County
- Population from the 2020 Census: 3,292 people
- Jump to TripAdvisor's Tourism page for Plainview <3>
- Oronoco
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Oronoco have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oronoco
- Oronoco is located in Olmsted County
- Population from the 2020 Census: 1,532 people
- Jump to TripAdvisor's Tourism page for Oronoco <3>
- Rochester
(10 miles [16.1 km] to the southwest)
- Zumbro Falls
(10 miles [16.1 km] to the north)
- Eyota
(11 miles [17.7 km] to the southeast)
- Genoa
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Genoa
- Genoa is located in Olmsted County
- Mazeppa
(13 miles [20.9 km] to the northwest)
- Post Town
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Post Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Post Town
- Post Town is located in Olmsted County
- Simpson
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Simpson
- Simpson is located in Olmsted County
- Dover
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Olmsted County
- Population from the 2020 Census: 776 people
- Jump to TripAdvisor's Tourism page for Dover <3>
- Pine Island
(15 miles [24.1 km] to the west)
- Byron
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Byron have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byron
- Byron is located in Olmsted County
- Population from the 2020 Census: 5,691 people
- Jump to TripAdvisor's Tourism page for Byron <3>
- Elba
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Elba have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elba
- Elba is located in Winona County
- Population from the 2020 Census: 156 people
- Beaver ‑ Historic
(16 miles [25.7 km] to the east)
- Jump to our Gazetteer entry for Beaver
- Beaver is located in Winona County
- Shanty Town
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Shanty Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shanty Town
- Shanty Town is located in Olmsted County
- Saint Charles
(18 miles [29 km] to the southeast)
- Bellechester
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Bellechester have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellechester
- Bellechester is located in Goodhue County
- Population from the 2020 Census: 177 people
- Zumbrota
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Zumbrota have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zumbrota
- Zumbrota is located in Goodhue County
- Population from the 2020 Census: 3,530 people
- Jump to TripAdvisor's Tourism page for Zumbrota <3>
- Mantorville
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Mantorville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mantorville
- Mantorville is located in Dodge County
- Population from the 2020 Census: 1,205 people
- Jump to TripAdvisor's Tourism page for Mantorville <3>
- Rock Dell
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rock Dell. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rock Dell
- Rock Dell is located in Olmsted County
- Stewartville
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Stewartville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stewartville
- Stewartville is located in Olmsted County
- Population from the 2020 Census: 6,095 people
- Jump to TripAdvisor's Tourism page for Stewartville <3>
- Altura
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Altura have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Altura
- Altura is located in Winona County
- Population from the 2020 Census: 477 people
- Jump to TripAdvisor's Tourism page for Altura <3>
- Kellogg
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Kellogg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kellogg
- Kellogg is located in Wabasha County
- Population from the 2020 Census: 460 people
- Jump to TripAdvisor's Tourism page for Kellogg <3>
Off-the-Road Links ...
The official website for Olmsted County: www.olmstedcounty.com/ The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Zion Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.1364, Longitude: -92.3486 In this case, the coordinates for the Zion Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|