|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Trinity Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Trinity Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Trinity Cemetery. We've listed the following communities based on their distance, with the closest first.
- Hutchinson
(4 miles [6.4 km] to the northeast)
- Stewart
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Stewart have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stewart
- Stewart is located in McLeod County
- Population from the 2020 Census: 533 people
- Brownton
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Brownton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brownton
- Brownton is located in McLeod County
- Population from the 2020 Census: 711 people
- Jump to TripAdvisor's Tourism page for Brownton <2>
- Biscay
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Biscay
- Biscay is located in McLeod County
- Population from the 2020 Census: 109 people
- Cedar Mills
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for Cedar Mills
- Cedar Mills is located in Meeker County
- Population from the 2020 Census: 51 people
- Sumter
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Sumter. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sumter
- Sumter is located in McLeod County
- Buffalo Lake
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Buffalo Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo Lake
- Buffalo Lake is located in Renville County
- Population from the 2020 Census: 678 people
- Jump to TripAdvisor's Tourism page for Buffalo Lake <2>
- Fernando
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Fernando
- Fernando is located in McLeod County
- Silver Lake
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Silver Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver Lake
- Silver Lake is located in McLeod County
- Population from the 2020 Census: 806 people
- Jump to TripAdvisor's Tourism page for Silver Lake <2>
- Glencoe
(14 miles [22.5 km] to the east)
- Cosmos
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Cosmos have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cosmos
- Cosmos is located in Meeker County
- Population from the 2020 Census: 448 people
- Jump to TripAdvisor's Tourism page for Cosmos <2>
- Hector
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Hector have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hector
- Hector is located in Renville County
- Population from the 2020 Census: 1,041 people
- Jump to TripAdvisor's Tourism page for Hector <2>
- New Auburn
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for New Auburn. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for New Auburn
- New Auburn is located in Sibley County
- Population from the 2020 Census: 427 people
- Jump to TripAdvisor's Tourism page for New Auburn <2>
- Dassel
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Dassel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dassel
- Dassel is located in Meeker County
- Population from the 2020 Census: 1,472 people
- Jump to TripAdvisor's Tourism page for Dassel <2>
- Darwin
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Darwin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Darwin
- Darwin is located in Meeker County
- Population from the 2020 Census: 355 people
- Jump to TripAdvisor's Tourism page for Darwin <2>
- Plato
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Plato. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Plato
- Plato is located in McLeod County
- Population from the 2020 Census: 303 people
- Jump to TripAdvisor's Tourism page for Plato <2>
- Lester Prairie
(19 miles [30.6 km] to the east)
- Rosendale
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Rosendale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rosendale
- Rosendale is located in Meeker County
- Litchfield
(20 miles [32.2 km] to the north)
- Winthrop
(20 miles [32.2 km] to the south)
- Winsted
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Winsted have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winsted
- Winsted is located in McLeod County
- Population from the 2020 Census: 2,230 people
- Jump to TripAdvisor's Tourism page for Winsted <2>
- Cokato
(20 miles [32.2 km] to the northeast)
- Gibbon
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Gibbon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibbon
- Gibbon is located in Sibley County
- Population from the 2020 Census: 740 people
- Jump to TripAdvisor's Tourism page for Gibbon <2>
- Bird Island
(22 miles [35.4 km] to the west)
- Gaylord
(22 miles [35.4 km] to the southeast)
- New Germany
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for New Germany have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Germany
- New Germany is located in Carver County
- Population from the 2020 Census: 422 people
- Jump to TripAdvisor's Tourism page for New Germany <2>
- Smith Lake
(22 miles [35.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Smith Lake. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Smith Lake
- Smith Lake is located in Wright County
- Lake Lillian
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Lake Lillian have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Lillian
- Lake Lillian is located in Kandiyohi County
- Population from the 2020 Census: 233 people
- Jump to TripAdvisor's Tourism page for Lake Lillian <2>
Off-the-Road Links ...
The official website for McLeod County: www.co.mcleod.mn.us/ The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Trinity Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.8380, Longitude: -94.4367 In this case, the coordinates for the Trinity Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|