|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Joseph Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Joseph Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Joseph Cemetery. We've listed the following communities based on their distance, with the closest first.
- Grey Eagle
(Less than 2 miles to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Grey Eagle. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Grey Eagle
- Grey Eagle is located in Todd County
- Population from the 2020 Census: 327 people
- Jump to TripAdvisor's Tourism page for Grey Eagle <3>
- Burtrum
(4 miles [6.4 km] to the northeast)
- Saint Rosa
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Saint Rosa have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Rosa
- Saint Rosa is located in Stearns County
- Population from the 2020 Census: 71 people
- Upsala
(8 miles [12.9 km] to the east)
- Swanville
(8 miles [12.9 km] to the northeast)
- Pillsbury
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Pillsbury. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Pillsbury
- Pillsbury is located in Todd County
- Melrose
(10 miles [16.1 km] to the south)
- Sauk Centre
(11 miles [17.7 km] to the southwest)
- Freeport
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Freeport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freeport
- Freeport is located in Stearns County
- Population from the 2020 Census: 671 people
- Jump to TripAdvisor's Tourism page for Freeport <3>
- Saint Anthony
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Saint Anthony have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Anthony
- Saint Anthony is located in Stearns County
- Population from the 2020 Census: 91 people
- Long Prairie
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Long Prairie have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long Prairie
- Long Prairie is located in Todd County
- Population from the 2020 Census: 3,297 people
- Jump to TripAdvisor's Tourism page for Long Prairie <3>
- Elmdale
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Elmdale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Elmdale
- Elmdale is located in Morrison County
- Population from the 2020 Census: 116 people
- New Munich
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for New Munich have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Munich
- New Munich is located in Stearns County
- Population from the 2020 Census: 330 people
- Jump to TripAdvisor's Tourism page for New Munich <3>
- Meire Grove
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Meire Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meire Grove
- Meire Grove is located in Stearns County
- Population from the 2020 Census: 200 people
- Sobieski
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Sobieski have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sobieski
- Sobieski is located in Morrison County
- Population from the 2020 Census: 194 people
- Flensburg
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Flensburg
- Flensburg is located in Morrison County
- Population from the 2020 Census: 223 people
- Greenwald
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Greenwald have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenwald
- Greenwald is located in Stearns County
- Population from the 2020 Census: 224 people
- Jump to TripAdvisor's Tourism page for Greenwald <3>
- Albany
(15 miles [24.1 km] to the southeast)
- Holdingford
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Holdingford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holdingford
- Holdingford is located in Stearns County
- Population from the 2020 Census: 725 people
- Jump to TripAdvisor's Tourism page for Holdingford <3>
- West Union
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for West Union have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Union
- West Union is located in Todd County
- Population from the 2020 Census: 123 people
- Bowlus
(16 miles [25.7 km] to the east)
- Browerville
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Browerville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Browerville
- Browerville is located in Todd County
- Population from the 2020 Census: 744 people
- Elrosa
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Elrosa have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elrosa
- Elrosa is located in Stearns County
- Population from the 2020 Census: 229 people
- Jump to TripAdvisor's Tourism page for Elrosa <3>
- Opole
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Opole. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Opole
- Opole is located in Stearns County
- North Prairie
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for North Prairie. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for North Prairie
- North Prairie is located in Morrison County
- Clotho
(19 miles [30.6 km] to the northwest)
- Jump to our Gazetteer entry for Clotho
- Clotho is located in Todd County
- Osakis
(19 miles [30.6 km] to the west)
Off-the-Road Links ...
The official website for Todd County: www.co.todd.mn.us/ The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Joseph Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.8194, Longitude: -94.7575 In this case, the coordinates for the St. Joseph Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|