Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Royalton Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Royalton Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Royalton Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Royalton
(Less than 2 miles to the northwest)- Jump to our Gazetteer entry for Royalton
- Royalton is located in Morrison County
- Population from the 2020 Census: 1,229 people
- Jump to TripAdvisor's Tourism page for Royalton <2>
- Rice
(5 miles [8 km] to the southeast)- Note: The GPS coordinates that we are using for Rice have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rice
- Rice is located in Benton County
- Population from the 2020 Census: 1,401 people
- Jump to TripAdvisor's Tourism page for Rice <2>
- Bowlus
(5 miles [8 km] to the west)- Jump to our Gazetteer entry for Bowlus
- Bowlus is located in Morrison County
- Population from the 2020 Census: 276 people
- Jump to TripAdvisor's Tourism page for Bowlus <2>
- Opole
(6 miles [9.7 km] to the southwest) - Saint Stephen
(8 miles [12.9 km] to the south)- Note: The GPS coordinates that we are using for Saint Stephen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Stephen
- Saint Stephen is located in Stearns County
- Population from the 2020 Census: 867 people
- Buckman
(10 miles [16.1 km] to the northeast) - Elmdale
(10 miles [16.1 km] to the west) - Holdingford
(11 miles [17.7 km] to the southwest)- Note: The GPS coordinates that we are using for Holdingford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holdingford
- Holdingford is located in Stearns County
- Population from the 2020 Census: 725 people
- Jump to TripAdvisor's Tourism page for Holdingford <2>
- Saint Wendel
(11 miles [17.7 km] to the south)- Note: The GPS coordinates that we are using for Saint Wendel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Wendel
- Saint Wendel is located in Stearns County
- Little Falls
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Little Falls
- Little Falls is located in Morrison County
- Population from the 2020 Census: 8,619 people
- Jump to TripAdvisor's Tourism page for Little Falls <2>
- Watab
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Watab
- Watab is located in Benton County
- Sobieski
(11 miles [17.7 km] to the northwest) - Genola
(12 miles [19.3 km] to the northeast) - Pierz
(13 miles [20.9 km] to the northeast)- Note: The GPS coordinates that we are using for Pierz have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pierz
- Pierz is located in Morrison County
- Population from the 2020 Census: 1,364 people
- Jump to TripAdvisor's Tourism page for Pierz <2>
- Upsala
(13 miles [20.9 km] to the west)- Jump to our Gazetteer entry for Upsala
- Upsala is located in Morrison County
- Population from the 2020 Census: 420 people
- Jump to TripAdvisor's Tourism page for Upsala <2>
- Sartell
(14 miles [22.5 km] to the south)- Note: The GPS coordinates that we are using for Sartell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sartell
- Sartell is located in Stearns County
- Population from the 2020 Census: 19,079 people
- Jump to TripAdvisor's Tourism page for Sartell <2>
- Evergreen Village
(14 miles [22.5 km] to the south)- Note: The GPS coordinates that we are using for Evergreen Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen Village
- Evergreen Village is located in Stearns County
- Evergreen Village
(14 miles [22.5 km] to the south)- Note: The GPS coordinates that we are using for Evergreen Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen Village
- Evergreen Village is located in Benton County
- Flensburg
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Flensburg
- Flensburg is located in Morrison County
- Population from the 2020 Census: 223 people
- Morrill
(15 miles [24.1 km] to the east) - Avon
(16 miles [25.7 km] to the southwest)- Jump to our Gazetteer entry for Avon
- Avon is located in Stearns County
- Population from the 2020 Census: 1,652 people
- Jump to TripAdvisor's Tourism page for Avon <2>
- Collegeville
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Collegeville
- Collegeville is located in Stearns County
- Jump to TripAdvisor's Tourism page for Collegeville <2>
- Sauk Rapids
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Sauk Rapids
- Sauk Rapids is located in Benton County
- Population from the 2020 Census: 14,330 people
- Jump to TripAdvisor's Tourism page for Sauk Rapids <2>
- Ramey
(16 miles [25.7 km] to the east)- Jump to our Gazetteer entry for Ramey
- Ramey is located in Morrison County
- Saint Joseph
(17 miles [27.4 km] to the south)- Jump to our Gazetteer entry for Saint Joseph
- Saint Joseph is located in Stearns County
- Population from the 2020 Census: 7,763 people
- Jump to TripAdvisor's Tourism page for Saint Joseph <2>
- Gilman
(17 miles [27.4 km] to the east)- Note: The GPS coordinates that we are using for Gilman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilman
- Gilman is located in Benton County
- Population from the 2020 Census: 216 people
- Jump to TripAdvisor's Tourism page for Gilman <2>
Off-the-Road Links ...
The official website for Benton County: www.co.benton.mn.us/
The official website for State of Minnesota: https://mn.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Royalton Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.8227, Longitude: -94.2833 In this case, the coordinates for the Royalton Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |