Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Cable (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Cable. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Cable is located in Sherburne County.
To see how the shape of Minnesota's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Sherburne County: Anoka, Benton, Isanti, Mille Lacs, Stearns & Wright.
Below are the counties that are near Cable. For each of these counties, we show a sample of those communities that are closest to Cable:
- Sherburne County (The home county of Cable)
- The following are listed by their distance from Cable, with the one closest to Cable listed first.
- Clear Lake
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Clear Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Lake
- Clear Lake is located in Sherburne County
- Population from the 2020 Census: 729 people
- Jump to TripAdvisor's Tourism page for Clear Lake <2>
- Santiago
(12 miles [19.3 km] to the east)
- Becker
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Becker have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Becker
- Becker is located in Sherburne County
- Population from the 2020 Census: 5,033 people
- Jump to TripAdvisor's Tourism page for Becker <2>
- Orrock
(16 miles [25.7 km] to the east)
- Salida
(16 miles [25.7 km] to the southeast)
- Big Lake
(20 miles [32.2 km] to the southeast)
- Zimmerman
(23 miles [37 km] to the east)
- Elk River
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Elk River have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elk River
- Elk River is located in Sherburne County
- Population from the 2020 Census: 25,601 people
- Jump to TripAdvisor's Tourism page for Elk River <2>
- Anoka County
- Nowthen
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Nowthen have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nowthen
- Nowthen is located in Anoka County
- Population from the 2020 Census: 4,732 people
- Benton County
- The following are listed by their distance from Cable, with the one closest to Cable listed first.
- Duelm
(7 miles [11.3 km] to the northeast)
- Sauk Rapids
(7 miles [11.3 km] to the northwest)
- Evergreen Village
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Evergreen Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen Village
- Evergreen Village is located in Benton County
- Watab
(12 miles [19.3 km] to the northwest)
- Foley
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Foley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foley
- Foley is located in Benton County
- Population from the 2020 Census: 2,653 people
- Jump to TripAdvisor's Tourism page for Foley <2>
- Ronneby
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Ronneby have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ronneby
- Ronneby is located in Benton County
- Gilman
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Gilman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilman
- Gilman is located in Benton County
- Population from the 2020 Census: 216 people
- Jump to TripAdvisor's Tourism page for Gilman <2>
- Oak Park
(17 miles [27.4 km] to the northeast)
- Rice
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Rice have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rice
- Rice is located in Benton County
- Population from the 2020 Census: 1,401 people
- Jump to TripAdvisor's Tourism page for Rice <2>
- Isanti County
- Crown
(30 miles [48.3 km] to the east)
- Meeker County
- The following are listed by their distance from Cable, with the one closest to Cable listed first.
- Watkins
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Watkins have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Watkins
- Watkins is located in Meeker County
- Population from the 2020 Census: 958 people
- Jump to TripAdvisor's Tourism page for Watkins <2>
- Kingston
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Kingston have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingston
- Kingston is located in Meeker County
- Population from the 2020 Census: 162 people
- Eden Valley
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Eden Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eden Valley
- Eden Valley is located in Meeker County
- Population from the 2020 Census: 1,038 people
- Jump to TripAdvisor's Tourism page for Eden Valley <2>
- Forest City
(28 miles [45.1 km] to the southwest)
- Mille Lacs County
- The following are listed by their distance from Cable, with the one closest to Cable listed first.
- Estes Brook
(18 miles [29 km] to the northeast)
- Princeton
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Princeton have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Princeton
- Princeton is located in Mille Lacs County
- Population from the 2020 Census: 4,738 people
- Jump to TripAdvisor's Tourism page for Princeton <2>
- Foreston
(23 miles [37 km] to the northeast)
- Pease
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Pease have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pease
- Pease is located in Mille Lacs County
- Population from the 2020 Census: 224 people
- Milaca
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Milaca have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milaca
- Milaca is located in Mille Lacs County
- Population from the 2020 Census: 2,899 people
- Jump to TripAdvisor's Tourism page for Milaca <2>
- Morrison County
- The following are listed by their distance from Cable, with the one closest to Cable listed first.
- Morrill
(23 miles [37 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Morrill. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Morrill
- Morrill is located in Morrison County
- Google driving directions:
- From your current location to Morrill
- From Cable to Morrill
- Ramey
(23 miles [37 km] to the north)
- North Prairie
(24 miles [38.6 km] to the northwest)
- Royalton
(24 miles [38.6 km] to the northwest)
- Buckman
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Buckman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckman
- Buckman is located in Morrison County
- Population from the 2020 Census: 273 people
- Bowlus
(26 miles [41.8 km] to the northwest)
- Elmdale
(30 miles [48.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Elmdale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elmdale
- Elmdale is located in Morrison County
- Population from the 2020 Census: 116 people
- Google driving directions:
- From your current location to Elmdale
- From Cable to Elmdale
- Stearns County
- The following are listed by their distance from Cable, with the one closest to Cable listed first.
- Saint Cloud
(5 miles [8 km] to the northwest)
- Waite Park
(7 miles [11.3 km] to the northwest)
- Saint Augusta
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Saint Augusta. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Saint Augusta
- Saint Augusta is located in Stearns County
- Population from the 2020 Census: 3,900 people
- Google driving directions:
- From your current location to Saint Augusta
- From Cable to Saint Augusta
- Evergreen Village
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Evergreen Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen Village
- Evergreen Village is located in Stearns County
- Sartell
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Sartell have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sartell
- Sartell is located in Stearns County
- Population from the 2020 Census: 19,079 people
- Jump to TripAdvisor's Tourism page for Sartell <2>
- Pleasant Lake
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Pleasant Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Lake
- Pleasant Lake is located in Stearns County
- Rockville
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockville
- Rockville is located in Stearns County
- Population from the 2020 Census: 2,599 people
- Jump to TripAdvisor's Tourism page for Rockville <2>
- Saint Joseph
(12 miles [19.3 km] to the west)
- Fairhaven
(14 miles [22.5 km] to the southwest)
- Collegeville
(15 miles [24.1 km] to the west)
- Saint Stephen
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Saint Stephen have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Stephen
- Saint Stephen is located in Stearns County
- Population from the 2020 Census: 867 people
- Cold Spring
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Stearns County
- Population from the 2020 Census: 4,350 people
- Jump to TripAdvisor's Tourism page for Cold Spring <2>
- Wright County
- The following are listed by their distance from Cable, with the one closest to Cable listed first.
- Clearwater
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Clearwater have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clearwater
- Clearwater is located in Wright County
- Population from the 2020 Census: 1,841 people
- Jump to TripAdvisor's Tourism page for Clearwater <2>
- Hasty
(10 miles [16.1 km] to the southeast)
- Silver Creek
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Silver Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver Creek
- Silver Creek is located in Wright County
- South Haven
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for South Haven have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Haven
- South Haven is located in Wright County
- Population from the 2020 Census: 189 people
- Jump to TripAdvisor's Tourism page for South Haven <2>
- Annandale
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Annandale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annandale
- Annandale is located in Wright County
- Population from the 2020 Census: 3,546 people
- Jump to TripAdvisor's Tourism page for Annandale <2>
- Maple Lake
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Maple Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Lake
- Maple Lake is located in Wright County
- Population from the 2020 Census: 2,149 people
- Jump to TripAdvisor's Tourism page for Maple Lake <2>
- Monticello
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Monticello have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monticello
- Monticello is located in Wright County
- Population from the 2020 Census: 13,893 people
- Jump to TripAdvisor's Tourism page for Monticello <2>
- Albion Center
(23 miles [37 km] to the south)
- Rassat
(25 miles [40.2 km] to the south)
- Buffalo
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Wright County
- Population from the 2020 Census: 16,853 people
- Jump to TripAdvisor's Tourism page for Buffalo <2>
- Albright
(26 miles [41.8 km] to the south)
- Albertville
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Albertville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Albertville
- Albertville is located in Wright County
- Population from the 2020 Census: 7,547 people
- Jump to TripAdvisor's Tourism page for Albertville <2>
For an expanded list of the communities that are closest to Cable, see our County-by-County Page for Cable.
Cemeteries Near Cable ...
Below are cemeteries that are in the vicinity of Cable.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Cable covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Cable, with the one closest to Cable listed first.
- Minnesota Reformatory Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Minnesota Reformatory Cemetery
- Note: The GPS coordinates that we are using for the Minnesota Reformatory Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- St. Mary Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the St. Mary Cemetery
- Note: The GPS coordinates that we are using for the St. Mary Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Assumption Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Assumption Cemetery
- Note: The GPS coordinates that we are using for the Assumption Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Acacia Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Acacia Cemetery
- Note: The GPS coordinates that we are using for the Acacia Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- St. Marcus Cemetery
(5 miles [8 km] to the southeast)
- St. Patrick's Cemetery
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for the St. Patrick's Cemetery
- Note: The GPS coordinates that we are using for the St. Patrick's Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- North Star Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the North Star Cemetery
- Note: The GPS coordinates that we are using for the North Star Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Calvary Cemetery
(5 miles [8 km] to the west)
- St. Luke Cemetery
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for the St. Luke Cemetery
- Note: The GPS coordinates that we are using for the St. Luke Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Benton Cemetery
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for the Benton Cemetery
- Note: The GPS coordinates that we are using for the Benton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Sacred Heart Cemetery
(6 miles [9.7 km] to the northwest)
- Trinity Cemetery
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for the Trinity Cemetery
- Note: The GPS coordinates that we are using for the Trinity Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Continue List (199 more) ...
- Pioneer Benton County Cemetery
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for the Pioneer Benton County Cemetery
- Note: The GPS coordinates that we are using for the Pioneer Benton County Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Mt. Hope Cemetery
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for the Mt. Hope Cemetery
- Note: The GPS coordinates that we are using for the Mt. Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- St. Lawrence Cemetery
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for the St. Lawrence Cemetery
- Note: The GPS coordinates that we are using for the St. Lawrence Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that in 1895, Cable had a post office and railroad service.
These communities are listed based on their distance from Cable, with the one closest to Cable listed first.
- Clear Lake
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Clear Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Lake
- Clear Lake is located in Sherburne County
- Population from the 2020 Census: 729 people
- Jump to TripAdvisor's Tourism page for Clear Lake <2>
- Saint Cloud
(5 miles [8 km] to the northwest)
- Saint Augusta
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Saint Augusta. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Saint Augusta
- Saint Augusta is located in Stearns County
- Population from the 2020 Census: 3,900 people
- Google driving directions:
- From your current location to Saint Augusta
- From Cable to Saint Augusta
- Clearwater
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Clearwater have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clearwater
- Clearwater is located in Wright County
- Population from the 2020 Census: 1,841 people
- Jump to TripAdvisor's Tourism page for Clearwater <2>
- Duelm
(7 miles [11.3 km] to the northeast)
- Sauk Rapids
(7 miles [11.3 km] to the northwest)
- Luxemburg
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Luxemburg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Luxemburg
- Luxemburg is located in Stearns County
- Parent
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Parent have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parent
- Parent is located in Benton County
- Hasty
(10 miles [16.1 km] to the southeast)
- Rockville
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Rockville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockville
- Rockville is located in Stearns County
- Population from the 2020 Census: 2,599 people
- Jump to TripAdvisor's Tourism page for Rockville <2>
- Watab
(12 miles [19.3 km] to the northwest)
- Santiago
(12 miles [19.3 km] to the east)
- Continue List (15 more) ...
- Saint Joseph
(12 miles [19.3 km] to the west)
- Becker
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Becker have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Becker
- Becker is located in Sherburne County
- Population from the 2020 Census: 5,033 people
- Jump to TripAdvisor's Tourism page for Becker <2>
- Foley
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Foley have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foley
- Foley is located in Benton County
- Population from the 2020 Census: 2,653 people
- Jump to TripAdvisor's Tourism page for Foley <2>
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Cable. See our List of 1890's Communities around Cable.
Newspapers Published in Cable ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 123 newspapers that have been published in the area around Cable.
Although we're unaware of any newspapers that were published in the immediate area of Cable, there are papers which were published within 30 miles [48.3 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Cable.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Cable:
- Websites specific to Minnesota
- Pages specific to Sherburne County
- Genealogy information for nearby counties
- Anoka County
- Benton County
- Isanti County
- Meeker County
- Mille Lacs County
- Morrison County
- Stearns County
- Wright County
- Cemetery Information and Directories for Minnesota
Off-the-Road Links ...
Unfortunately, we don't know of a website for Cable. If you can help, please contact us through our Feedback Page.
The official website for Sherburne County: www.co.sherburne.mn.us/
The official website for State of Minnesota: https://mn.gov/
Footnotes ...
<1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cable, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Cable) to Point B.Our distance measurements begin at a specific point in Cable. The point we use is located at these GPS coordinates - Latitude: 45.5105, Longitude: -94.0730 In this case, the coordinates for Cable have been provided by the Geographic Names Information System (GNIS). |