Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Sherman had a population of 350 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Sherman, with the one closest to Sherman listed first.
- Mesick
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Mesick have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mesick
- Mesick is located in Wexford County
- Population from the 2020 Census: 407 people
- Jump to TripAdvisor's Tourism page for Mesick <3>
- Harlan ‑ Historic
(6 miles [9.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Harlan. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Harlan
- Harlan is located in Manistee County
- Google driving directions:
- From your current location to Harlan
- From Sherman to Harlan
- Harrietta
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Harrietta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrietta
- Harrietta is located in Wexford County
- Population from the 2020 Census: 145 people
- Jump to TripAdvisor's Tourism page for Harrietta <3>
- Marilla
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Marilla have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marilla
- Marilla is located in Manistee County
- Meauwataka
(9 miles [14.5 km] to the southeast)
- Pomona
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Pomona. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Pomona
- Pomona is located in Manistee County
- Google driving directions:
- From your current location to Pomona
- From Sherman to Pomona
- Boon
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Boon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boon
- Boon is located in Wexford County
- Hannah
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Hannah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hannah
- Hannah is located in Grand Traverse County
- Nessen City
(11 miles [17.7 km] to the northwest)
- Copemish
(11 miles [17.7 km] to the west)
- Millersville
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millersville
- Millersville is located in Wexford County
- Summit City
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Summit City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summit City
- Summit City is located in Grand Traverse County
- Kingsley
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Kingsley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsley
- Kingsley is located in Grand Traverse County
- Population from the 2020 Census: 1,618 people
- Jump to TripAdvisor's Tourism page for Kingsley <3>
- Monroe Center
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Monroe Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe Center
- Monroe Center is located in Grand Traverse County
- Thompsonville
(13 miles [20.9 km] to the northwest)
- Gilbert
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Gilbert have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilbert
- Gilbert is located in Wexford County
- Manton
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Manton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Manton
- Manton is located in Wexford County
- Population from the 2020 Census: 1,591 people
- Jump to TripAdvisor's Tourism page for Manton <3>
- Interlochen
(15 miles [24.1 km] to the north)
- Hoxeyville ‑ Historic
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hoxeyville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hoxeyville
- Hoxeyville is located in Wexford County
- Hoxeyville has also been known as:
- Clay Hill
- Google driving directions:
- From your current location to Hoxeyville
- From Sherman to Hoxeyville
- Bendon
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Bendon. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bendon
- Bendon is located in Benzie County
- Google driving directions:
- From your current location to Bendon
- From Sherman to Bendon
- Missaukee Junction
(16 miles [25.7 km] to the southeast)
- Walton
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Walton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Walton
- Walton is located in Grand Traverse County
- Walton has also been known as:
- Walton Junction
- Google driving directions:
- From your current location to Walton
- From Sherman to Walton
- Mayfield
(16 miles [25.7 km] to the northeast)
- Grawn
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Grawn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grawn
- Grawn is located in Grand Traverse County
- Jump to TripAdvisor's Tourism page for Grawn <3>
- Benson
(17 miles [27.4 km] to the southeast)
Off-the-Road Links ...
The official website for Wexford County: www.wexfordcounty.org/
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sherman, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |