Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Sand Lake had a population of 386 people in 1895 with a post office and railroad service. In 2020, Sand Lake had a population of 537 people.
The following communities are listed based on their distance from Sand Lake, with the one closest to Sand Lake listed first.
- Pierson
(2 miles [3.2 km] to the northeast)
- Cedar Springs
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Cedar Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in Kent County
- Population from the 2020 Census: 3,743 people
- Jump to TripAdvisor's Tourism page for Cedar Springs <2>
- Sheffield
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Sheffield
- Sheffield is located in Kent County
- Evans
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Evans have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evans
- Evans is located in Kent County
- Coral
(7 miles [11.3 km] to the northeast)
- Howard City
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Howard City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard City
- Howard City is located in Montcalm County
- Population from the 2020 Census: 1,819 people
- Jump to TripAdvisor's Tourism page for Howard City <2>
- Harvard
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Harvard. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Harvard
- Harvard is located in Kent County
- Trufant
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Trufant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trufant
- Trufant is located in Montcalm County
- Jump to TripAdvisor's Tourism page for Trufant <2>
- Edgerton
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Edgerton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edgerton
- Edgerton is located in Kent County
- Sun
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Sun. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sun
- Sun is located in Newaygo County
- Rockford
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Rockford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockford
- Rockford is located in Kent County
- Population from the 2020 Census: 6,395 people
- Jump to TripAdvisor's Tourism page for Rockford <2>
- Gowen
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Gowen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gowen
- Gowen is located in Montcalm County
- Jump to TripAdvisor's Tourism page for Gowen <2>
- Amble
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Amble
- Amble is located in Montcalm County
- Kent City
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Kent City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kent City
- Kent City is located in Kent County
- Population from the 2020 Census: 1,212 people
- Jump to TripAdvisor's Tourism page for Kent City <2>
- Croton
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Croton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Croton
- Croton is located in Newaygo County
- Sparta
(13 miles [20.9 km] to the southwest)
- Langston
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Langston. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Langston
- Langston is located in Montcalm County
- Casnovia
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Casnovia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casnovia
- Casnovia is located in Kent County
- Population from the 2020 Census: 320 people
- Jump to TripAdvisor's Tourism page for Casnovia <2>
- Englishville
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Englishville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Englishville
- Englishville is located in Kent County
- Morley
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Morley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morley
- Morley is located in Mecosta County
- Population from the 2020 Census: 495 people
- Jump to TripAdvisor's Tourism page for Morley <2>
- Grant
(14 miles [22.5 km] to the west)
- Ashland
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Ashland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ashland
- Ashland is located in Newaygo County
- Bailey
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bailey
- Bailey is located in Muskegon County
- Jump to TripAdvisor's Tourism page for Bailey <2>
- Belmont
(15 miles [24.1 km] to the south)
- Grattan
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Grattan
- Grattan is located in Kent County
- Greenville
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Montcalm County
- Population from the 2020 Census: 8,386 people
- Jump to TripAdvisor's Tourism page for Greenville <2>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Sand Lake. If you can help, please contact us through our Feedback Page.
The official website for Kent County: www.accesskent.com/
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sand Lake, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |