|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Rumely in the Atlas, the following communities of the 1890's would have been found near the current location of Rumely. The following communities are listed based on their distance, with the one closest to Rumely listed first.
- Onota
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Onota. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Onota
- Onota is located in Alger County
Google driving directions:
From your current location to Onota
From Rumely to Onota
- Deerton
(8 miles [12.9 km] to the north)
- Rock River
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Rock River have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock River
- Rock River is located in Alger County
- Au Train
(10 miles [16.1 km] to the northeast)
- Gordon
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Gordon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gordon
- Gordon is located in Marquette County
- Little Lake
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Little Lake have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Lake
- Little Lake is located in Marquette County
- Jump to TripAdvisor's Tourism page for Little Lake <3>
- McFarland
(15 miles [24.1 km] to the southwest)
- Swanzy
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Swanzy have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swanzy
- Swanzy is located in Marquette County
- Lathrop
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lathrop. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lathrop
- Lathrop is located in Delta County
Google driving directions:
From your current location to Lathrop
From Rumely to Lathrop
- Plains
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Plains have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plains
- Plains is located in Marquette County
- Munising
(18 miles [29 km] to the east)
- Harvey
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Harvey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harvey
- Harvey is located in Marquette County
- Jump to TripAdvisor's Tourism page for Harvey <3>
- Sands
(18 miles [29 km] to the west)
- Rock
(20 miles [32.2 km] to the south)
- Marquette
(22 miles [35.4 km] to the northwest)
- Campbell
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Campbell have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbell
- Campbell is located in Delta County
- Beaver
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Beaver. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Beaver
- Beaver is located in Delta County
Google driving directions:
From your current location to Beaver
From Rumely to Beaver
- Perkins
(25 miles [40.2 km] to the south)
- Shingleton
(26 miles [41.8 km] to the east)
- Eagle Mills
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Eagle Mills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagle Mills
- Eagle Mills is located in Marquette County
- Palmer
(27 miles [43.5 km] to the west)
- Brampton
(28 miles [45.1 km] to the south)
- Rapid River
(29 miles [46.7 km] to the south)
- Negaunee
(29 miles [46.7 km] to the west)
Off-the-Road Links ...
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rumely, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|