Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Millers Corners, we use the following websites to find information relevant to Millers Corners and the surrounding area.
- Weather ...
- Before heading outdoors, you should check the weather:
- The National Weather Service forecast for Millers Corners
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Millers Corners:
- 44.584167, -85.154167
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- The Heavens-Above Website, centered on Millers Corners
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Kalkaska County as the starting point when you click on the link below:
- eBird sighting report for Kalkaska County
- Since Millers Corners is near Missaukee County and also Grand Traverse County, we have provided a link to their eBird sighting reports:
- eBird sighting report for Missaukee County
- eBird sighting report for Grand Traverse County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Waymark.com
Communities Also Named Millers Corners ...
We found five communities that share the name Millers Corners.
Within Michigan, the name Millers Corners is unique.
Beyond Michigan, we know of another five communities that are located throughout in the United States.
- Communities Elsewhere In North America ...
- California
- Madera County
- We found mention of this community, but have little information.<1> For the information that we do have, please visit our profile page for the California community of Millers Corners [Madera County].
- New York
- Ontario County
- We found mention of this community, but have little information.<1> For the information that we do have, please visit our profile page for the New York community of Millers Corners [Ontario County].
- Rensselaer County
- This Millers Corners is located in Rensselaer County and lies 595 miles [957.6 km]<2> to the east of the Millers Corners that is located in Kalkaska County.
- For more information, please visit our profile page for the Rensselaer County community of Millers Corners.
- Ohio
- Holmes County
- This Millers Corners is located in Holmes County and lies 324 miles [521.4 km]<2> to the south southeast of the Millers Corners that is located in Kalkaska County.
- For more information, please visit our profile page for the Holmes County community of Millers Corners.
- Licking County
- This Millers Corners is located in Licking County and lies 333 miles [535.9 km] to the south southeast of the Millers Corners that is located in Kalkaska County.
- For more information, please visit our profile page for the Licking County community of Millers Corners.
- California
Curious and Interesting Names Near Millers Corners ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Cotton
(9 miles [14.5 km] to the northeast) - Devils Elbow
(17 miles [27.4 km] to the northwest)- Jump to our Gazetteer entry for Devils Elbow
- Devils Elbow is located in Grand Traverse County
- Houseman
(7 miles [11.3 km] to the west) - Jacks Landing
(15 miles [24.1 km] to the west)- Note: The GPS coordinates that we are using for Jacks Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jacks Landing
- Jacks Landing is located in Grand Traverse County
- Jennings
(18 miles [29 km] to the south)- Jump to our Gazetteer entry for Jennings
- Jennings is located in Missaukee County
- Lake City
(17 miles [27.4 km] to the south)- Note: The GPS coordinates that we are using for Lake City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake City
- Lake City is located in Missaukee County
- Population from the 2020 Census: 837 people
- Jump to TripAdvisor's Tourism page for Lake City <4>
- Mabel
(16 miles [25.7 km] to the northwest)- Jump to our Gazetteer entry for Mabel
- Mabel is located in Grand Traverse County
- Pioneer
(8 miles [12.9 km] to the south) - Rapid City
(18 miles [29 km] to the north)- Note: The GPS coordinates that we are using for Rapid City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rapid City
- Rapid City is located in Kalkaska County
- Jump to TripAdvisor's Tourism page for Rapid City <4>
- Star City
(16 miles [25.7 km] to the southeast) - Summit City
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Summit City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Summit City
- Summit City is located in Grand Traverse County
- Tent City
(17 miles [27.4 km] to the east)
How Far From Millers Corners to ...
We spend a lot of time looking through Gazetteers & Almanacs that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Millers Corners to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance beginning in Millers Corners and extending to:
- Kalkaska, which is the Seat of Kalkaska County, lies 10 miles [16.1 km]<2> to the north. If you could walk a straight line from Millers Corners to Kalkaska, with an average speed<5> of 2.2 miles [3.5 km] per hour, it would take four to five hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take a little over three hours.
- Lansing, which is the State Capital of Michigan, lies 131 miles [210.8 km] to the south southeast (SSE). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than three hours, a buggy would take 6 days and walking would take 8 days.
- The White House (Washington, DC) is 573 miles [922.2 km] to the southeast (SE). Driving would take just over a day, a buggy would take 23 days and walking would take 33 days.
- The shortest distance<6> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 5,963 miles [9,596.5 km] and it lies to the northeast (NE).<7>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,705 miles [10,790.7 km] and it lies to the northeast (NE).<8>
- The distance to Saint Peter's Basilica (The Vatican) is 4,592 miles [7,390.1 km] and it lies to the northeast (NE).<9>
Off-the-Road Links ...
Unfortunately, we don't know of a website for Millers Corners. If you can help, please contact us through our Feedback Page.
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
| <1> | If we encounter the name of what might be a community, our methodology is to add that name to our Gazetteer as a placeholder. As we find more information about that community, it will be added to our Gazetteer. Just as a reminder: Our definition of a community is rather broad and includes those places (or areas) where several families lived and had a name which identified that place. For example, you might hear somebody say that they are going over to Mile's to see Pete ... Mile's is just a gas station and a couple of homes at the crossroads. While it might not be on the map, everybody in the area knows it by that name. Places of interest include buildings at a crossroad, several families clustered in a hollow or maybe the location of a way station. It also includes places like mines, lumber camps, ferry crossings, etc. The community might still exist, is now gone or only existed for just a short period of time. Also keep in mind that Millers Corners could have been on the original document by mistake, misspelled, the original/alternate name of a community that we've listed elsewhere or was placed in the wrong county. Sometimes a post office or train station would have a different name than the community where it's located, so two names might be referring to the same community - we're working to straighten it all out. |
| <2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Millers Corners) to Point B.Our distance measurements begin at a specific point in Millers Corners. The point we use is located at these GPS coordinates - Latitude: 44.5842, Longitude: -85.1542 In this case, the coordinates for Millers Corners have been provided by the Geographic Names Information System (GNIS). |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <6> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Millers Corners to the Middle East to be East and South, the Great Circle Route actually lies to the North and East. |
| <7> | The calculated bearing (or angle) to Jerusalem is 312.712 degrees. |
| <8> | The calculated bearing (or angle) to Mecca is 309.767 degrees. |
| <9> | The calculated bearing (or angle) to the Vatican is 306.447 degrees. |