|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Lupton in the Atlas, the following communities of the 1890's would have been found near the current location of Lupton. The following communities are listed based on their distance, with the one closest to Lupton listed first.
- Long Lake
(7 miles [11.3 km] to the east)
- Selkirk
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Selkirk have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selkirk
- Selkirk is located in Ogemaw County
- Campbells Corners
(10 miles [16.1 km] to the southwest)
- Damon
(10 miles [16.1 km] to the west)
- Hale
(11 miles [17.7 km] to the east)
- West Branch
(14 miles [22.5 km] to the southwest)
- Ogemaw Springs
(15 miles [24.1 km] to the southwest)
- Mio
(16 miles [25.7 km] to the north)
- Prescott
(17 miles [27.4 km] to the south)
- Whittemore
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Whittemore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whittemore
- Whittemore is located in Iosco County
- Population from the 2020 Census: 375 people
- Jump to TripAdvisor's Tourism page for Whittemore <2>
- Luzerne
(17 miles [27.4 km] to the northwest)
- Greenwood
(18 miles [29 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Greenwood. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Greenwood
- Greenwood is located in Ogemaw County
- Google driving directions:
- From your current location to Greenwood
- From Lupton to Greenwood
- Bryant
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Bryant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryant
- Bryant is located in Alcona County
- Saint Helen
(19 miles [30.6 km] to the west)
- Maple Ridge
(20 miles [32.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Maple Ridge. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Maple Ridge
- Maple Ridge is located in Arenac County
- Google driving directions:
- From your current location to Maple Ridge
- From Lupton to Maple Ridge
- Fairview
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Oscoda County
- Jump to TripAdvisor's Tourism page for Fairview <2>
- Alger
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Alger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alger
- Alger is located in Arenac County
- Jump to TripAdvisor's Tourism page for Alger <2>
- Melita
(21 miles [33.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Melita. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Melita
- Melita is located in Arenac County
- Google driving directions:
- From your current location to Melita
- From Lupton to Melita
- McIvor
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for McIvor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIvor
- McIvor is located in Iosco County
- Curran
(22 miles [35.4 km] to the northeast)
- Red Oak
(23 miles [37 km] to the northwest)
- Wilber
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Wilber. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wilber
- Wilber is located in Iosco County
- Google driving directions:
- From your current location to Wilber
- From Lupton to Wilber
- Sterling
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Sterling have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sterling
- Sterling is located in Arenac County
- Population from the 2020 Census: 498 people
- Jump to TripAdvisor's Tourism page for Sterling <2>
- Omer
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Omer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Omer
- Omer is located in Arenac County
- Population from the 2020 Census: 288 people
- Tawas City
(27 miles [43.5 km] to the southeast)
Off-the-Road Links ...
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lupton, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|