Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Higbee Corner in the Atlas, the following communities of the 1890's would have been found near the current location of Higbee Corner. The following communities are listed based on their distance, with the one closest to Higbee Corner listed first.
- Borland
(2 miles [3.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Borland. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Borland
- Borland is located in Mecosta County
- Rustford
(3 miles [4.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rustford. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rustford
- Rustford is located in Mecosta County
- Altona
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Altona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Altona
- Altona is located in Mecosta County
- Stanwood
(3 miles [4.8 km] to the northwest)
- Morley
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Morley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morley
- Morley is located in Mecosta County
- Population from the 2020 Census: 495 people
- Jump to TripAdvisor's Tourism page for Morley <4>
- Sylvester
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Sylvester have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sylvester
- Sylvester is located in Mecosta County
- Amble
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Amble
- Amble is located in Montcalm County
- Lakeview
(9 miles [14.5 km] to the southeast)
- Mecosta
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Mecosta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mecosta
- Mecosta is located in Mecosta County
- Population from the 2020 Census: 459 people
- Jump to TripAdvisor's Tourism page for Mecosta <4>
- Rodney
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Rodney have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rodney
- Rodney is located in Mecosta County
- Jump to TripAdvisor's Tourism page for Rodney <4>
- Howard City
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Howard City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard City
- Howard City is located in Montcalm County
- Population from the 2020 Census: 1,819 people
- Jump to TripAdvisor's Tourism page for Howard City <4>
- Coral
(12 miles [19.3 km] to the south)
- Big Rapids
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Big Rapids have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Rapids
- Big Rapids is located in Mecosta County
- Population from the 2020 Census: 10,408 people
- Jump to TripAdvisor's Tourism page for Big Rapids <4>
- Remus
(12 miles [19.3 km] to the east)
- Big Prairie
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Big Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Prairie
- Big Prairie is located in Newaygo County
- Six Lakes
(14 miles [22.5 km] to the southeast)
- Chippewa Lake
(14 miles [22.5 km] to the north)
- Croton
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Croton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Croton
- Croton is located in Newaygo County
- Trufant
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Trufant have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trufant
- Trufant is located in Montcalm County
- Jump to TripAdvisor's Tourism page for Trufant <4>
- Blanchard
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Blanchard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blanchard
- Blanchard is located in Isabella County
- Jump to TripAdvisor's Tourism page for Blanchard <4>
- Millbrook
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Millbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millbrook
- Millbrook is located in Mecosta County
- Pierson
(16 miles [25.7 km] to the south)
- Paris
(16 miles [25.7 km] to the north)
- Woodville
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Woodville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodville
- Woodville is located in Newaygo County
- Langston
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Langston. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Langston
- Langston is located in Montcalm County
- Entrican
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Entrican have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Entrican
- Entrican is located in Montcalm County
Off-the-Road Links ...
The official website for Mecosta County: www.co.mecosta.mi.us/
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Higbee Corner, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |