Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Dale in the Atlas, the following communities of the 1890's would have been found near the current location of Dale. The following communities are listed based on their distance, with the one closest to Dale listed first.
- Beaverton
(3 miles [4.8 km] to the northwest)
- Edenville
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Edenville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edenville
- Edenville is located in Midland County
- Gladwin
(8 miles [12.9 km] to the north)
- Hope
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Hope have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hope
- Hope is located in Midland County
- Jump to TripAdvisor's Tourism page for Hope <2>
- Alamando
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Alamando have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alamando
- Alamando is located in Midland County
- Coleman
(10 miles [16.1 km] to the southwest)
- North Bradley
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for North Bradley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Bradley
- North Bradley is located in Midland County
- Loomis
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Loomis
- Loomis is located in Isabella County
- McClure
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McClure
- McClure is located in Gladwin County
- Wise
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Wise have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wise
- Wise is located in Isabella County
- Sanford
(13 miles [20.9 km] to the south)
- Rhodes
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Rhodes
- Rhodes is located in Gladwin County
- Averill
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Averill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Averill
- Averill is located in Midland County
- Dover
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Dover
- Dover is located in Clare County
- Delwin
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Delwin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delwin
- Delwin is located in Isabella County
- Mount Forest
(16 miles [25.7 km] to the east)
- Jump to our Gazetteer entry for Mount Forest
- Mount Forest is located in Bay County
- Clare
(16 miles [25.7 km] to the west)
- Leaton
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Leaton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leaton
- Leaton is located in Isabella County
- Nine Mile
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Nine Mile
- Nine Mile is located in Bay County
- Saint Elmo
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Saint Elmo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Elmo
- Saint Elmo is located in Midland County
- Midland
(19 miles [30.6 km] to the southeast)
- Butman
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Butman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butman
- Butman is located in Gladwin County
- Hatton
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Hatton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatton
- Hatton is located in Clare County
- Jordan
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Jordan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jordan
- Jordan is located in Isabella County
- Willard
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Willard
- Willard is located in Bay County
- Meredith
(20 miles [32.2 km] to the northwest)
- Jump to our Gazetteer entry for Meredith
- Meredith is located in Clare County
Off-the-Road Links ...
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Dale, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |