Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Trinity Lutheran Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Trinity Lutheran Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Trinity Lutheran Cemetery (FG ID #2496046). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Trinity Lutheran Cemetery. We've listed the following communities based on their distance, with the closest first.
- Barton City
(Less than 2 miles to the east)- Jump to our Gazetteer entry for Barton City
- Barton City is located in Alcona County
- Jump to TripAdvisor's Tourism page for Barton City <3>
- Google driving directions:
- From your current location to Barton City
- From the Trinity Lutheran Cemetery to Barton City
- Hubbard Lake
(6 miles [9.7 km] to the northeast)- Jump to our Gazetteer entry for Hubbard Lake
- Hubbard Lake is located in Alcona County
- Google driving directions:
- From your current location to Hubbard Lake
- From the Trinity Lutheran Cemetery to Hubbard Lake
- Lincoln
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Lincoln
- Lincoln is located in Alcona County
- Population from the 2020 Census: 316 people
- Jump to TripAdvisor's Tourism page for Lincoln <3>
- Google driving directions:
- From your current location to Lincoln
- From the Trinity Lutheran Cemetery to Lincoln
- Curran
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Curran
- Curran is located in Alcona County
- Jump to TripAdvisor's Tourism page for Curran <3>
- Google driving directions:
- From your current location to Curran
- From the Trinity Lutheran Cemetery to Curran
- Glennie
(10 miles [16.1 km] to the southwest)- Jump to our Gazetteer entry for Glennie
- Glennie is located in Alcona County
- Jump to TripAdvisor's Tourism page for Glennie <3>
- Google driving directions:
- From your current location to Glennie
- From the Trinity Lutheran Cemetery to Glennie
- Gustin
(10 miles [16.1 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Gustin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Gustin
- Gustin is located in Alcona County
- Google driving directions:
- From your current location to Gustin
- From the Trinity Lutheran Cemetery to Gustin
- Mikado
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Mikado
- Mikado is located in Alcona County
- Jump to TripAdvisor's Tourism page for Mikado <3>
- Google driving directions:
- From your current location to Mikado
- From the Trinity Lutheran Cemetery to Mikado
- Lost Lake Woods
(11 miles [17.7 km] to the northeast)- Jump to our Gazetteer entry for Lost Lake Woods
- Lost Lake Woods is located in Alcona County
- Google driving directions:
- From your current location to Lost Lake Woods
- From the Trinity Lutheran Cemetery to Lost Lake Woods
- Hubbard Lake
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Hubbard Lake
- Hubbard Lake is located in Alpena County
- Jump to TripAdvisor's Tourism page for Hubbard Lake <3>
- Google driving directions:
- From your current location to Hubbard Lake
- From the Trinity Lutheran Cemetery to Hubbard Lake
- Spruce
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for Spruce
- Spruce is located in Alcona County
- Jump to TripAdvisor's Tourism page for Spruce <3>
- Google driving directions:
- From your current location to Spruce
- From the Trinity Lutheran Cemetery to Spruce
- Curtisville
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Curtisville
- Curtisville is located in Alcona County
- Google driving directions:
- From your current location to Curtisville
- From the Trinity Lutheran Cemetery to Curtisville
- Greenbush
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Greenbush
- Greenbush is located in Alcona County
- Jump to TripAdvisor's Tourism page for Greenbush <3>
- Google driving directions:
- From your current location to Greenbush
- From the Trinity Lutheran Cemetery to Greenbush
- Springport
(15 miles [24.1 km] to the east)- Note: The GPS coordinates that we are using for Springport have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springport
- Springport is located in Alcona County
- Harrisville
(15 miles [24.1 km] to the east)- Jump to our Gazetteer entry for Harrisville
- Harrisville is located in Alcona County
- Population from the 2020 Census: 470 people
- Jump to TripAdvisor's Tourism page for Harrisville <3>
- Google driving directions:
- From your current location to Harrisville
- From the Trinity Lutheran Cemetery to Harrisville
- Sid Town
(16 miles [25.7 km] to the south) - Alcona
(16 miles [25.7 km] to the east)- Jump to our Gazetteer entry for Alcona
- Alcona is located in Alcona County
- Google driving directions:
- From your current location to Alcona
- From the Trinity Lutheran Cemetery to Alcona
- McKinley
(16 miles [25.7 km] to the west)- Note: We haven't been able to verify our GPS coordinates for McKinley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for McKinley
- McKinley is located in Oscoda County
- Google driving directions:
- From your current location to McKinley
- From the Trinity Lutheran Cemetery to McKinley
- Black River
(17 miles [27.4 km] to the northeast)- Jump to our Gazetteer entry for Black River
- Black River is located in Alcona County
- Jump to TripAdvisor's Tourism page for Black River <3>
- Google driving directions:
- From your current location to Black River
- From the Trinity Lutheran Cemetery to Black River
- Ossineke
(17 miles [27.4 km] to the northeast)- Jump to our Gazetteer entry for Ossineke
- Ossineke is located in Alpena County
- Jump to TripAdvisor's Tourism page for Ossineke <3>
- Google driving directions:
- From your current location to Ossineke
- From the Trinity Lutheran Cemetery to Ossineke
- Lincoln Junction
(18 miles [29 km] to the southeast)- Note: We haven't been able to verify our GPS coordinates for Lincoln Junction. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lincoln Junction
- Lincoln Junction is located in Iosco County
- Google driving directions:
- From your current location to Lincoln Junction
- From the Trinity Lutheran Cemetery to Lincoln Junction
- Foote Site Village
(19 miles [30.6 km] to the southeast)- Note: The GPS coordinates that we are using for Foote Site Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foote Site Village
- Foote Site Village is located in Iosco County
- South Branch
(20 miles [32.2 km] to the southwest)- Jump to our Gazetteer entry for South Branch
- South Branch is located in Ogemaw County
- Jump to TripAdvisor's Tourism page for South Branch <3>
- Google driving directions:
- From your current location to South Branch
- From the Trinity Lutheran Cemetery to South Branch
- Wilber
(21 miles [33.8 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Wilber. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wilber
- Wilber is located in Iosco County
- Google driving directions:
- From your current location to Wilber
- From the Trinity Lutheran Cemetery to Wilber
- Fairview
(21 miles [33.8 km] to the west)- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Oscoda County
- Jump to TripAdvisor's Tourism page for Fairview <3>
- Long Lake
(22 miles [35.4 km] to the southwest)- Jump to our Gazetteer entry for Long Lake
- Long Lake is located in Iosco County
- Jump to TripAdvisor's Tourism page for Long Lake <3>
- Google driving directions:
- From your current location to Long Lake
- From the Trinity Lutheran Cemetery to Long Lake
- Oscoda
(22 miles [35.4 km] to the southeast)- Note: The GPS coordinates that we are using for Oscoda have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oscoda
- Oscoda is located in Iosco County
- Jump to TripAdvisor's Tourism page for Oscoda <3>
Off-the-Road Links ...
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Trinity Lutheran Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.6846, Longitude: -83.6106 |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |