|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Maple Valley Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Maple Valley Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Maple Valley Cemetery. We've listed the following communities based on their distance, with the closest first.
- Trufant
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Trufant have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trufant
- Trufant is located in Montcalm County
- Jump to TripAdvisor's Tourism page for Trufant <3>
- Coral
(2 miles [3.2 km] to the northwest)
- Pierson
(6 miles [9.7 km] to the west)
- Gowen
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Gowen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gowen
- Gowen is located in Montcalm County
- Jump to TripAdvisor's Tourism page for Gowen <3>
- Langston
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Langston. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Langston
- Langston is located in Montcalm County
- Howard City
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Howard City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howard City
- Howard City is located in Montcalm County
- Population from the 2020 Census: 1,819 people
- Jump to TripAdvisor's Tourism page for Howard City <3>
- Amble
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Amble
- Amble is located in Montcalm County
- Sand Lake
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Sand Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sand Lake
- Sand Lake is located in Kent County
- Population from the 2020 Census: 537 people
- Jump to TripAdvisor's Tourism page for Sand Lake <3>
- Lakeview
(8 miles [12.9 km] to the northeast)
- Harvard
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Harvard. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Harvard
- Harvard is located in Kent County
- Sheffield
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Sheffield
- Sheffield is located in Kent County
- Morley
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Morley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morley
- Morley is located in Mecosta County
- Population from the 2020 Census: 495 people
- Jump to TripAdvisor's Tourism page for Morley <3>
- Cedar Springs
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Cedar Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Springs
- Cedar Springs is located in Kent County
- Population from the 2020 Census: 3,743 people
- Jump to TripAdvisor's Tourism page for Cedar Springs <3>
- Greenville
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Montcalm County
- Population from the 2020 Census: 8,386 people
- Jump to TripAdvisor's Tourism page for Greenville <3>
- Six Lakes
(12 miles [19.3 km] to the northeast)
- Rustford
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Rustford. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rustford
- Rustford is located in Mecosta County
- Eureka Place
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Eureka Place. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Eureka Place
- Eureka Place is located in Montcalm County
- Sidney
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Sidney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sidney
- Sidney is located in Montcalm County
- Jump to TripAdvisor's Tourism page for Sidney <3>
- Borland
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Borland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Borland
- Borland is located in Mecosta County
- Edgerton
(15 miles [24.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Edgerton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edgerton
- Edgerton is located in Kent County
- Stanton
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Stanton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanton
- Stanton is located in Montcalm County
- Population from the 2020 Census: 1,420 people
- Jump to TripAdvisor's Tourism page for Stanton <3>
- Halls Corner
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Halls Corner
- Halls Corner is located in Mecosta County
- Amsden
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Amsden
- Amsden is located in Montcalm County
- McBride
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for McBride have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McBride
- McBride is located in Montcalm County
- Population from the 2020 Census: 203 people
- Jump to TripAdvisor's Tourism page for McBride <3>
- Riverview
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Riverview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverview
- Riverview is located in Newaygo County
- Croton
(16 miles [25.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Croton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Croton
- Croton is located in Newaygo County
Off-the-Road Links ...
The official website for Montcalm County: www.montcalm.org/ The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Maple Valley Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.3359, Longitude: -85.3725 In this case, the coordinates for the Maple Valley Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|