|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Custer Riverside - St. Mary's Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Custer Riverside - St. Mary's Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Custer Riverside - St. Mary's Cemetery (FG ID #1503). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Custer Riverside - St. Mary's Cemetery. We've listed the following communities based on their distance, with the closest first.
- Custer
(Less than 2 miles to the north)
- Scottville
(2 miles [3.2 km] to the west)
- Elm Flats ‑ Historic
(4 miles [6.4 km] to the north)
- Amber
(4 miles [6.4 km] to the west)
- Walhalla
(5 miles [8 km] to the east)
- Sugar Grove
(5 miles [8 km] to the northwest)
- Wiley
(6 miles [9.7 km] to the southwest)
- Tallman
(6 miles [9.7 km] to the northeast)
- Batcheller ‑ Historic
(6 miles [9.7 km] to the northeast)
- Fountain
(7 miles [11.3 km] to the north)
- Meisenheimer Corners
(10 miles [16.1 km] to the southwest)
- Carr
(10 miles [16.1 km] to the southeast)
- Millerton ‑ Historic
(10 miles [16.1 km] to the northeast)
- Free Soil
(11 miles [17.7 km] to the north)
- Ludington
(11 miles [17.7 km] to the west)
- Buttersville ‑ Historic
(11 miles [17.7 km] to the west)
- White Pine Village ‑ Historic
(11 miles [17.7 km] to the west)
- Sauble
(12 miles [19.3 km] to the northeast)
- Piney Ridge
(13 miles [20.9 km] to the west)
- Pentwater
(15 miles [24.1 km] to the southwest)
- French Town
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for French Town have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for French Town
- French Town is located in Oceana County
- Walkerville
(16 miles [25.7 km] to the south)
- Elbridge
(17 miles [27.4 km] to the south)
- Hart
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Hart have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hart
- Hart is located in Oceana County
- Population from the 2020 Census: 2,089 people
- Jump to TripAdvisor's Tourism page for Hart <3>
- Cobmoosa
(18 miles [29 km] to the south)
- Baldwin
(18 miles [29 km] to the east)
- Peacock
(18 miles [29 km] to the northeast)
Off-the-Road Links ...
The official website for State of Michigan: https://www.michigan.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Custer Riverside - St. Mary's Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.9411, Longitude: -86.2228 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|