RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Michigan >> Benzie County >> Cedar Run >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Michigan


The Commemorative Quarter for Michigan







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Cedar Run (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Cedar Run. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Cedar Run is primarily located in Benzie County. A portion of Cedar Run extends into Grand Traverse County.

To see how the shape of Michigan's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Benzie County: Grand Traverse, Leelanau, Manistee & Wexford.

Below are the counties that are near Cedar Run. For each of these counties, we show a sample of those communities that are closest to Cedar Run:

  • Benzie County     (The home county of Cedar Run)
    • The following are listed by their distance from Cedar Run, with the one closest to Cedar Run listed first.
    • Lake Ann
      (3 miles [4.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lake Ann have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lake Ann
      • Lake Ann is located in Benzie County
      • Population from the 2020 Census: 271 people
      • Jump to TripAdvisor's Tourism page for Lake Ann <2>
    • Bendon
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Bendon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bendon
      • Bendon is located in Benzie County
    • Platte River
      (9 miles [14.5 km] to the southwest)
      • Note: The GPS coordinates that we are using for Platte River have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Platte River
      • Platte River is located in Benzie County
    • Honor
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Honor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Honor
      • Honor is located in Benzie County
      • Population from the 2020 Census: 331 people
      • Jump to TripAdvisor's Tourism page for Honor <2>
    • Aral ‑ Historic
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Aral have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aral
      • Aral is located in Benzie County
      • Aral has also been known as:
      • Otter Creek
    • Wallin
      (13 miles [20.9 km] to the south)
      • Jump to our Gazetteer entry for Wallin
      • Wallin is located in Benzie County
    • Griner Station
      (16 miles [25.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Griner Station. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Griner Station
      • Griner Station is located in Benzie County
      • Griner Station has also been known as:
      • Print
    • Beulah
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Beulah have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beulah
      • Beulah is located in Benzie County
      • Population from the 2020 Census: 347 people
      • Jump to TripAdvisor's Tourism page for Beulah <2>
    • Nessen City
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Nessen City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nessen City
      • Nessen City is located in Benzie County
    • Thompsonville
      (17 miles [27.4 km] to the south)
    • Benzonia
      (17 miles [27.4 km] to the southwest)
    • Elberta
      (22 miles [35.4 km] to the southwest)
    • Frankfort
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Frankfort have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Frankfort
      • Frankfort is located in Benzie County
      • Population from the 2020 Census: 1,289 people
      • Jump to TripAdvisor's Tourism page for Frankfort <2>
  • Antrim County
    • The following are listed by their distance from Cedar Run, with the one closest to Cedar Run listed first.
    • Elk Rapids
      (21 miles [33.8 km] to the northeast)
    • Kewadin
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Kewadin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kewadin
      • Kewadin is located in Antrim County
      • Jump to TripAdvisor's Tourism page for Kewadin <2>
    • Alden
      (27 miles [43.5 km] to the east)
    • Clam Lake ‑ Historic
      (29 miles [46.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Clam Lake. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Clam Lake
      • Clam Lake is located in Antrim County
  • Grand Traverse County
    • The following are listed by their distance from Cedar Run, with the one closest to Cedar Run listed first.
    • Interlochen
      (8 miles [12.9 km] to the south)
    • Traverse City
      (9 miles [14.5 km] to the east)
    • Grawn
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Grawn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grawn
      • Grawn is located in Grand Traverse County
      • Jump to TripAdvisor's Tourism page for Grawn <2>
    • Pavlovic Corner
      (13 miles [20.9 km] to the south)
      • Jump to our Gazetteer entry for Pavlovic Corner
      • Pavlovic Corner is located in Grand Traverse County
    • Acme
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Acme have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Acme
      • Acme is located in Grand Traverse County
      • Jump to TripAdvisor's Tourism page for Acme <2>
    • Mayfield
      (16 miles [25.7 km] to the southeast)
      • Jump to our Gazetteer entry for Mayfield
      • Mayfield is located in Grand Traverse County
    • Devils Elbow
      (17 miles [27.4 km] to the east)
      • Jump to our Gazetteer entry for Devils Elbow
      • Devils Elbow is located in Grand Traverse County
    • Mapleton
      (17 miles [27.4 km] to the northeast)
      • Jump to our Gazetteer entry for Mapleton
      • Mapleton is located in Grand Traverse County
    • Kingsley
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kingsley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingsley
      • Kingsley is located in Grand Traverse County
      • Population from the 2020 Census: 1,618 people
      • Jump to TripAdvisor's Tourism page for Kingsley <2>
    • Angel
      (20 miles [32.2 km] to the east)
      • Jump to our Gazetteer entry for Angel
      • Angel is located in Grand Traverse County
      • Angel has also been known as:
      • Angel Station
      • Angell Station
    • Williamsburg
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Williamsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamsburg
      • Williamsburg is located in Grand Traverse County
      • Williamsburg has also been known as:
      • Williamburg
      • Jump to TripAdvisor's Tourism page for Williamsburg <2>
    • Summit City
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Summit City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Summit City
      • Summit City is located in Grand Traverse County
    • Old Mission
      (21 miles [33.8 km] to the northeast)
  • Kalkaska County
    • The following are listed by their distance from Cedar Run, with the one closest to Cedar Run listed first.
    • Barker Creek
      (24 miles [38.6 km] to the east)
      • Jump to our Gazetteer entry for Barker Creek
      • Barker Creek is located in Kalkaska County
    • Torch River
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Torch River have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Torch River
      • Torch River is located in Kalkaska County
    • Rapid City
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Rapid City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rapid City
      • Rapid City is located in Kalkaska County
      • Jump to TripAdvisor's Tourism page for Rapid City <2>
    • Fife Lake
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Fife Lake have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fife Lake
      • Fife Lake is located in Kalkaska County
      • Population from the 2020 Census: 478 people
      • Jump to TripAdvisor's Tourism page for Fife Lake <2>
    • South Boardman
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for South Boardman have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for South Boardman
      • South Boardman is located in Kalkaska County
      • Jump to TripAdvisor's Tourism page for South Boardman <2>
  • Leelanau County
    • The following are listed by their distance from Cedar Run, with the one closest to Cedar Run listed first.
    • Solon
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Solon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Solon
      • Solon is located in Leelanau County
    • Cedar
      (5 miles [8 km] to the north)
    • Maple City
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for Maple City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Maple City
      • Maple City is located in Leelanau County
      • Jump to TripAdvisor's Tourism page for Maple City <2>
    • Greilickville
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Greilickville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greilickville
      • Greilickville is located in Leelanau County
    • Isadore ‑ Historic
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Isadore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Isadore
      • Isadore is located in Leelanau County
    • Burdickville
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Burdickville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Burdickville
      • Burdickville is located in Leelanau County
    • Jacktown ‑ Historic
      (8 miles [12.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Jacktown. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Jacktown
      • Jacktown is located in Leelanau County
      • Jacktown has also been known as:
      • Osborn
    • Bodus
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Bodus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bodus
      • Bodus is located in Leelanau County
    • Bingham
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bingham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bingham
      • Bingham is located in Leelanau County
    • Shalda Corners ‑ Historic
      (11 miles [17.7 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Shalda Corners. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Shalda Corners
      • Shalda Corners is located in Leelanau County
    • Glen Arbor
      (12 miles [19.3 km] to the northwest)
    • Empire
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Empire have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Empire
      • Empire is located in Leelanau County
      • Population from the 2020 Census: 375 people
      • Jump to TripAdvisor's Tourism page for Empire <2>
    • Glen Haven ‑ Historic
      (14 miles [22.5 km] to the northwest)
      • Jump to our Gazetteer entry for Glen Haven
      • Glen Haven is located in Leelanau County
  • Manistee County
    • The following are listed by their distance from Cedar Run, with the one closest to Cedar Run listed first.
    • Copemish
      (20 miles [32.2 km] to the south)
    • Pomona
      (20 miles [32.2 km] to the south)
      • Note: The GPS coordinates that we are using for Pomona have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pomona
      • Pomona is located in Manistee County
    • Harlan ‑ Historic
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Harlan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harlan
      • Harlan is located in Manistee County
    • Henry ‑ Historic
      (21 miles [33.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Henry. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Henry
      • Henry is located in Manistee County
    • Malcolm
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Malcolm have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malcolm
      • Malcolm is located in Manistee County
    • Arcadia
      (27 miles [43.5 km] to the southwest)
    • Kaleva
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Kaleva have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kaleva
      • Kaleva is located in Manistee County
      • Population from the 2020 Census: 466 people
      • Jump to TripAdvisor's Tourism page for Kaleva <2>
    • Bear Lake
      (28 miles [45.1 km] to the southwest)
  • Wexford County
    • The following are listed by their distance from Cedar Run, with the one closest to Cedar Run listed first.
    • Buckley
      (19 miles [30.6 km] to the south)
    • Baxter
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Baxter have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Baxter
      • Baxter is located in Wexford County
    • Glengary
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Glengary
      • Glengary is located in Wexford County
    • Sherman
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Sherman
      • Sherman is located in Wexford County
    • Mesick
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Mesick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mesick
      • Mesick is located in Wexford County
      • Population from the 2020 Census: 407 people
      • Jump to TripAdvisor's Tourism page for Mesick <2>
    • Yuma
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Yuma have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Yuma
      • Yuma is located in Wexford County

For an expanded list of the communities that are closest to Cedar Run, see our County-by-County Page for Cedar Run.

Newspapers Published in Cedar Run ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 57 newspapers that have been published in the area around Cedar Run.

Although we're unaware of any newspapers that were published in the immediate area of Cedar Run, there are papers which were published within 29 miles [46.7 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Cedar Run.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Cedar Run:

Cemeteries Near Cedar Run ...

Below are cemeteries that are in the vicinity of Cedar Run.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Cedar Run covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Cedar Run, with the one closest to Cedar Run listed first.

  • Linwood Cemetery
    (2 miles [3.2 km] to the east)
    • Note: The GPS coordinates that we are using for the Linwood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Linwood Cemetery
  • Green Briar Cemetery
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for the Green Briar Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Green Briar Cemetery
  • Lake Ann Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Lake Ann Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lake Ann Cemetery
  • Solon Cemetery
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for the Solon Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Solon Cemetery
  • East Kasson Cemetery
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the East Kasson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the East Kasson Cemetery
  • Wilson Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Wilson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wilson Cemetery
  • Almira Cemetery
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for the Almira Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Almira Cemetery
  • Round Top Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Round Top Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Round Top Cemetery
  • Rose Hill Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Rose Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rose Hill Cemetery
  • Nash - Pettengill Cemetery
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for the Nash - Pettengill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nash - Pettengill Cemetery
  • St. Rita Cemetery
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for the St. Rita Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Rita Cemetery
  • Kasson Cemetery
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for the Kasson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Kasson Cemetery
  • Continue List   (127 more) ...
    • New Inland Cemetery
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for the New Inland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the New Inland Cemetery
    • Old Inland Cemetery
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for the Old Inland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Old Inland Cemetery
    • Mt. Hope Cemetery
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for the Mt. Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Mt. Hope Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Cedar Run had a population of 80 people in 1895 with a post office and no railroad service.

These communities are listed based on their distance from Cedar Run, with the one closest to Cedar Run listed first.

  • Lake Ann
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lake Ann have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Ann
    • Lake Ann is located in Benzie County
    • Population from the 2020 Census: 271 people
    • Jump to TripAdvisor's Tourism page for Lake Ann <2>
  • Solon
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Solon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Solon
    • Solon is located in Leelanau County
  • Maple City
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Maple City have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maple City
    • Maple City is located in Leelanau County
    • Jump to TripAdvisor's Tourism page for Maple City <2>
  • Interlochen
    (8 miles [12.9 km] to the south)
  • Burdickville
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Burdickville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Burdickville
    • Burdickville is located in Leelanau County
  • Bendon
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Bendon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bendon
    • Bendon is located in Benzie County
  • Grawn
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Grawn have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grawn
    • Grawn is located in Grand Traverse County
    • Jump to TripAdvisor's Tourism page for Grawn <2>
  • Traverse City
    (9 miles [14.5 km] to the east)
  • Bingham
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bingham have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bingham
    • Bingham is located in Leelanau County
  • Monroe Center
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Monroe Center have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe Center
    • Monroe Center is located in Grand Traverse County
  • Glen Arbor
    (12 miles [19.3 km] to the northwest)
  • Empire
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Empire have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Empire
    • Empire is located in Leelanau County
    • Population from the 2020 Census: 375 people
    • Jump to TripAdvisor's Tourism page for Empire <2>
  • Continue List   (14 more) ...
    • Keswick
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Keswick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Keswick
      • Keswick is located in Leelanau County
    • Edgewater
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Edgewater have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edgewater
      • Edgewater is located in Benzie County
    • Port Oneida ‑ Historic
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Port Oneida have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Port Oneida
      • Port Oneida is located in Leelanau County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Cedar Run. See our List of 1890's Communities around Cedar Run.

Unfortunately, we don't know of a website for Cedar Run. If you can help, please contact us through our Feedback Page.

The official website for Benzie County: www.berriencounty.org/

The official website for State of Michigan: https://www.michigan.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Cedar Run) to Point B.Our distance measurements begin at a specific point in Cedar Run. The point we use is located at these GPS coordinates - Latitude: 44.7628, Longitude: -85.8137       In this case, the coordinates for Cedar Run have been provided by the Geographic Names Information System (GNIS).
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cedar Run, please let us know so that we can improve our accuracy.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024