Census Data for Bellaire
Population ...
The most recent Census Estimate<1> was for 2019 and it gave Bellaire a population of 1,067 people.
The last Decennial Census<2> was in 2010, which gave Bellaire a population of 1,086 people.
The village of Bellaire is located in Antrim County. The 2010 Census gave Antrim County; a population of 23,580 people. This means that Bellaire had 4.61% of the county's total population, making it Antrim's 3rd most populous community.
At the same time, Michigan had a population of 9,883,640 people, meaning that Bellaire had 0.01% of the total population of Michigan - making it the state's 344th most populous community.
Area ...
The 2010 Census shows that the sampling area for Bellaire has a total area of 1.97 square miles [5.1 km²]. Of this total, 1.84 square miles [4.8 km²] is land, with the balance (6.41%) being water (0.13 square miles [0.3 km²]).
Antrim County has a land area of 475.7 square miles [1,232.1 km²]. At 1.84 square miles [4.8 km²], Bellaire has 0.39% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a village like Bellaire, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the village.
- Things like population, area and housing for Bellaire reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Bellaire might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 44° 58' 18" (or 44.97°)
- Lon: -85° 12' 19" (or -85.21°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Bellaire had 549 Housing Units<3> and with its population of 1,086 people, this averages 1.98 people per Housing Unit.
- Continue Reading ...
- The 2010 Census shows Bellaire had a land area of 1.84 square miles [4.8 km²]. This translates to 279.2 Housing Units per square mile [107.8 housing units/km²].
- From the Census of 2000: Bellaire had 545 Housing Units, a population of 1,164 people and a land area of 1.83 square miles [4.7 km²]. This gives a density of 2.14 people per Housing Unit and 279.8 Housing Units per square mile [108 housing units/km²].
- Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 Census and the 2000 Census, there were changes in the sampling area for Bellaire and you need to be careful when comparing numbers between the censuses. More information about the nature of these the changes can be found in the section called Census-to-Census Observations ... (see below).
Antrim County ...
The community of Bellaire is located in Antrim County<4> and is the County Seat for Antrim County.
The county had a population of 23,580 people at the 2010 Census. With it's population of 1,086 people, Bellaire represented 4.61% of the county's total.
In addition, where the village of Bellaire has a population density of 552 people per square mile [213.3 people/km²], Antrim County averages 49.57 people per square mile [19.14 people/km²].
For more information, please visit our Census Page for Antrim County.
Census-to-Census Observations ...
Introduction ...
When the Census Bureau takes a census count (or enumeration) for Bellaire, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Bellaire. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for Bellaire or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
Location ...
While generally coinciding with the GPS location (latitude/longitude) of Bellaire, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Bellaire.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 44.971822° (or 44°58'18" N)
- Lon: -85.205342° (or -85°12'19" W)
- For the 2000 Census, the location given was:
- Lat: 44.977478° (or 44°58'38" N)
- Lon: -85.205474° (or -85°12'19" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 2,062 feet to the south<5> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2398074) to Bellaire. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Bellaire. The GNIS point has been mapped to the latitude/longitude:
- Lat: 44.973709° (or 44°58'25" N)
- Lon: -85.205746° (or -85°12'20" W)
- The GPS location given for the 2010 Census lies 695 feet to the south<6> of the point given by the GNIS for Bellaire. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Bellaire.
Miscellaneous Information for Bellaire ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Antrim County or the village of Bellaire:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 26 (Michigan)
- County Code: 009 (Antrim County)
- Place Code: 06980 (Bellaire)
- State & County Code: 26/009 (Michigan / Antrim County)
- State & Place Code: 26/06980 (Michigan / Bellaire)
- Misc. Census Codes ...
- Bellaire is located in Census Region #2 (the Midwest Region) and Division #3 (the East North-Central Division).
- The US Postal Service ZIP Code ...
- While some people have used a ZIP code to identify a community, the purpose of the ZIP code was to make mail delivery more efficient by grouping addresses together. Although the ZIP Code doesn't specifically identify a village like Bellaire, it does identify addresses that are in (or near) Bellaire. It's important to remember that the boundaries of a ZIP Code can be changed, re-assigned or overlapped with other ZIP Codes.
- The ZIP code for Bellaire:49615<7>
- Census ZCTA Codes ...
- The US Census Bureau created statistical entities that they call ZIP Code Tabulation Areas (ZCTAs) and these ZCTAs are frequently confused with the ZIP codes that come from the US Postal Service (USPS).
- ZCTAs were first created for the 2000 Census and at that time, they were based upon the USPS ZIP codes. While largely covering the same areas, the boundaries of a ZCTA do not necessarily match the boundaries of a postal ZIP code with the same number. For example, while a postal ZIP code can cross a county or state line, a Census ZCTA can not. They should be treated as separate entities with no correlation between them.
For more information about the various Federal identification codes, please visit our Misc Page for Bellaire.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Bellaire. If you can help, please contact us through our Feedback Page.
The official website for Antrim County: www.antrimcounty.org/
The official website for State of Michigan: https://www.michigan.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019. |
| <2> | Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020. |
| <3> | A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway). |
| <4> | If you're interested in how the shape of Michigan's counties, including Antrim, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <5> | The calculated bearing (or angle) to the 2010 Census location is 180 degrees and a distance of 2,062 feet. |
| <6> | The calculated bearing (or angle) to the GNIS point is 188 degrees and a distance of 695 feet. |
| <7> | When looking for a ZIP Code, whether Bellaire or elsewhere, it's always best to check the website of the United States Postal Service (USPS). |