Nearest Communities to Split Hill,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Split Hill, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Split Hill:
We have great-grandparents who lived in a small community in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance.<1>
If you're researching your genealogy, we hope that the following information helps.
Split Hill is located in Washington County.
The following 3 counties adjoin and form the boundaries of Washington County: Aroostook, Hancock & Penobscot.
Our Gazetteer shows that there are 65 communities within 40 miles [64.4 km]<1> of Split Hill.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Split Hill (which is Washington County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Split Hill
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Washington County (where Split Hill resides)
- County Seat for Washington: Machias
- Note: The Atlantic Ocean lies to the south
- Genealogy Websites ...
- From Cyndi's List:
- State of Maine
- Washington County
- From Family Search:
- State of Maine
- Washington County
- From Genealogy Trails:
- State of Maine
- Washington County
- Nearest Communities to Split Hill ...
- These communities are listed by their distance from Split Hill.
- Ridge
(Less than 2 miles to the northeast) - West Lubec
(Less than 2 miles to the southwest)- Note: The GPS coordinates that we are using for West Lubec have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Lubec
- West Lubec is located in Washington County
- South Lubec
(2 miles [3.2 km] to the east)- Note: We haven't been able to verify our GPS coordinates for South Lubec. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for South Lubec
- South Lubec is located in Washington County
- Lubec
(3 miles [4.8 km] to the northeast)- Note: The GPS coordinates that we are using for Lubec have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lubec
- Lubec is located in Washington County
- Population from the 2020 Census: 1,267 people
- Jump to TripAdvisor's Tourism page for Lubec <5>
- North Lubec
(3 miles [4.8 km] to the northeast)- Jump to our Gazetteer entry for North Lubec
- North Lubec is located in Washington County
- North Trescott
(4 miles [6.4 km] to the northwest)- Note: The GPS coordinates that we are using for North Trescott have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Trescott
- North Trescott is located in Washington County
- South Trescott
(4 miles [6.4 km] to the south)- Note: The GPS coordinates that we are using for South Trescott have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Trescott
- South Trescott is located in Washington County
- Eastport
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for Eastport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eastport
- Eastport is located in Washington County
- Population from the 2020 Census: 1,275 people
- Jump to TripAdvisor's Tourism page for Eastport <5>
- Edmunds
(6 miles [9.7 km] to the northwest) - Whiting
(6 miles [9.7 km] to the west)- Note: The GPS coordinates that we are using for Whiting have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whiting
- Whiting is located in Washington County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Whiting <5>
- Quoddy
(7 miles [11.3 km] to the north) - Pleasant Point
(8 miles [12.9 km] to the north)- Note: The GPS coordinates that we are using for Pleasant Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Point
- Pleasant Point is located in Washington County
- Continue List (53 more) ...
- Perry
(10 miles [16.1 km] to the north) - Dennysville
(10 miles [16.1 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Dennysville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Dennysville
- Dennysville is located in Washington County
- Population from the 2020 Census: 331 people
- Jump to TripAdvisor's Tourism page for Dennysville <5>
- Imnarkuan ‑ Historic
(10 miles [16.1 km] to the northwest) - Pembroke
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Washington County
- Population from the 2020 Census: 796 people
- Jump to TripAdvisor's Tourism page for Pembroke <5>
- West Pembroke
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for West Pembroke
- West Pembroke is located in Washington County
- Lower Dennysville
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Lower Dennysville
- Lower Dennysville is located in Washington County
- Halls Mills
(11 miles [17.7 km] to the west)- Note: The GPS coordinates that we are using for Halls Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Mills
- Halls Mills is located in Washington County
- Marion
(13 miles [20.9 km] to the west) - North Perry
(14 miles [22.5 km] to the north)- Jump to our Gazetteer entry for North Perry
- North Perry is located in Washington County
- Ayers
(14 miles [22.5 km] to the northwest) - Cutler
(14 miles [22.5 km] to the southwest)- Note: The GPS coordinates that we are using for Cutler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutler
- Cutler is located in Washington County
- Population from the 2020 Census: 522 people
- Jump to TripAdvisor's Tourism page for Cutler <5>
- Little Machias
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Little Machias have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Machias
- Little Machias is located in Washington County
- North Cutler
(15 miles [24.1 km] to the southwest)- Note: We haven't been able to verify our GPS coordinates for North Cutler. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for North Cutler
- North Cutler is located in Washington County
- South Robbinston
(16 miles [25.7 km] to the north)- Note: The GPS coordinates that we are using for South Robbinston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Robbinston
- South Robbinston is located in Washington County
- Blanchard Corner
(16 miles [25.7 km] to the northwest)- Note: The GPS coordinates that we are using for Blanchard Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blanchard Corner
- Blanchard Corner is located in Washington County
- Charlotte
(16 miles [25.7 km] to the northwest) - Pine Corner
(16 miles [25.7 km] to the northwest)- Note: The GPS coordinates that we are using for Pine Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Corner
- Pine Corner is located in Washington County
- Chase Mills
(16 miles [25.7 km] to the west)- Note: The GPS coordinates that we are using for Chase Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chase Mills
- Chase Mills is located in Washington County
- Robbinston
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Robbinston
- Robbinston is located in Washington County
- Population from the 2020 Census: 571 people
- Jump to TripAdvisor's Tourism page for Robbinston <5>
- Dog Town
(17 miles [27.4 km] to the southwest)- Jump to our Gazetteer entry for Dog Town
- Dog Town is located in Washington County
- Jacksonville
(17 miles [27.4 km] to the west)- Note: The GPS coordinates that we are using for Jacksonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jacksonville
- Jacksonville is located in Washington County
- East Machias
(18 miles [29 km] to the west)- Note: The GPS coordinates that we are using for East Machias have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Machias
- East Machias is located in Washington County
- Population from the 2020 Census: 1,305 people
- Jump to TripAdvisor's Tourism page for East Machias <5>
- Machiasport Station
(19 miles [30.6 km] to the southwest)- Note: The GPS coordinates that we are using for Machiasport Station have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Machiasport Station
- Machiasport Station is located in Washington County
- Machiasport
(19 miles [30.6 km] to the southwest)- Note: The GPS coordinates that we are using for Machiasport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Machiasport
- Machiasport is located in Washington County
- Population from the 2020 Census: 961 people
- Jump to TripAdvisor's Tourism page for Machiasport <5>
- Mud Landing
(19 miles [30.6 km] to the west)- Note: The GPS coordinates that we are using for Mud Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mud Landing
- Mud Landing is located in Washington County
- Red Beach
(20 miles [32.2 km] to the north)- Jump to our Gazetteer entry for Red Beach
- Red Beach is located in Washington County
- Larrabee
(20 miles [32.2 km] to the southwest) - Hoyttown
(20 miles [32.2 km] to the west)- Jump to our Gazetteer entry for Hoyttown
- Hoyttown is located in Washington County
- Cooper
(21 miles [33.8 km] to the northwest) - Meddybemps
(21 miles [33.8 km] to the northwest)- Jump to our Gazetteer entry for Meddybemps
- Meddybemps is located in Washington County
- Population from the 2020 Census: 149 people
- Jump to TripAdvisor's Tourism page for Meddybemps <5>
- Bucks Harbor
(21 miles [33.8 km] to the southwest)- Jump to our Gazetteer entry for Bucks Harbor
- Bucks Harbor is located in Washington County
- Machias
(21 miles [33.8 km] to the west)- Jump to our Gazetteer entry for Machias
- Machias is located in Washington County
- Population from the 2020 Census: 1,844 people
- Jump to TripAdvisor's Tourism page for Machias <5>
- Calais
(22 miles [35.4 km] to the northwest)- Note: The GPS coordinates that we are using for Calais have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calais
- Calais is located in Washington County
- Population from the 2020 Census: 3,026 people
- Jump to TripAdvisor's Tourism page for Calais <5>
- Grove
(22 miles [35.4 km] to the northwest) - Starboard
(22 miles [35.4 km] to the southwest) - Marshfield
(22 miles [35.4 km] to the west)- Note: The GPS coordinates that we are using for Marshfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshfield
- Marshfield is located in Washington County
- Population from the 2020 Census: 518 people
- Kennebec
(23 miles [37 km] to the southwest) - Whitlocks Mill
(24 miles [38.6 km] to the north)- Note: The GPS coordinates that we are using for Whitlocks Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitlocks Mill
- Whitlocks Mill is located in Washington County
- Baring
(24 miles [38.6 km] to the northwest)- Jump to our Gazetteer entry for Baring
- Baring is located in Washington County
- Population from the 2020 Census: 239 people
- Baring has also been known as:
- Baring Plantation
- Whitneyville
(24 miles [38.6 km] to the west)- Note: The GPS coordinates that we are using for Whitneyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitneyville
- Whitneyville is located in Washington County
- Population from the 2020 Census: 206 people
- Saint Croix Junction
(25 miles [40.2 km] to the northwest)- Note: The GPS coordinates that we are using for Saint Croix Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Croix Junction
- Saint Croix Junction is located in Washington County
- Northfield
(25 miles [40.2 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Northfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Northfield
- Northfield is located in Washington County
- Population from the 2020 Census: 142 people
- Cedar
(26 miles [41.8 km] to the northwest) - Milltown
(26 miles [41.8 km] to the northwest) - Roque Bluffs
(26 miles [41.8 km] to the southwest)- Note: The GPS coordinates that we are using for Roque Bluffs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roque Bluffs
- Roque Bluffs is located in Washington County
- Population from the 2020 Census: 300 people
- Alexander
(27 miles [43.5 km] to the northwest)- Note: The GPS coordinates that we are using for Alexander have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alexander
- Alexander is located in Washington County
- Population from the 2020 Census: 486 people
- Jump to TripAdvisor's Tourism page for Alexander <5>
- Smith Landing
(27 miles [43.5 km] to the west)- Note: The GPS coordinates that we are using for Smith Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smith Landing
- Smith Landing is located in Washington County
- Woodland
(28 miles [45.1 km] to the northwest) - Jonesboro
(28 miles [45.1 km] to the southwest)- Note: The GPS coordinates that we are using for Jonesboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesboro
- Jonesboro is located in Washington County
- Population from the 2020 Census: 597 people
- Jump to TripAdvisor's Tourism page for Jonesboro <5>
- Crawford
(29 miles [46.7 km] to the northwest) - Woodland Junction
(29 miles [46.7 km] to the northwest)- Note: The GPS coordinates that we are using for Woodland Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodland Junction
- Woodland Junction is located in Washington County
- Mattimo Place
(29 miles [46.7 km] to the west)- Note: The GPS coordinates that we are using for Mattimo Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mattimo Place
- Mattimo Place is located in Washington County
- Rivers End
(29 miles [46.7 km] to the west)- Note: The GPS coordinates that we are using for Rivers End have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rivers End
- Rivers End is located in Washington County
- Perry
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Split Hill) to Point B.Our distance measurements begin at a specific point in Split Hill. The point we use is located at these GPS coordinates - Latitude: 44.8270, Longitude: -67.0428 In this case, the coordinates for Split Hill have been provided by the Geographic Names Information System (GNIS). |
| <2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking. We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now. Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |