Nearest Communities to Round Mountain,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Round Mountain, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Round Mountain:
We have great-grandparents who lived in a small community in the northwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Keep in mind that when we give a distance, it's a 'straight-line' distance.<1>
If you're researching your genealogy, we hope that the following information helps.
Round Mountain is located in Franklin County.
The following 4 counties adjoin and form the boundaries of Franklin County: Androscoggin, Kennebec, Oxford & Somerset.
Our Gazetteer shows that there are 57 communities within 40 miles [64.4 km]<1> of Round Mountain. Of these communities, 17 are located in counties other than Franklin County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Round Mountain (which is Franklin County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Round Mountain
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Franklin County (where Round Mountain resides)
- County Seat for Franklin: Farmington
- Note: The Canadian Province of Quebec lies to the north
- Genealogy Websites ...
- Nearest Communities to Round Mountain ...
- These communities are listed by their distance from Round Mountain.
- Coburn Gore
(11 miles [17.7 km] to the northwest)
- Jump to our Gazetteer entry for Coburn Gore
- Coburn Gore is located in Franklin County
- Moosehorn ‑ Historic
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Moosehorn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moosehorn
- Moosehorn is located in Franklin County
- Kennebago Settlement
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Kennebago Settlement have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kennebago Settlement
- Kennebago Settlement is located in Franklin County
- Eustis
(12 miles [19.3 km] to the southeast)
- Stratton
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Stratton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stratton
- Stratton is located in Franklin County
- Jump to TripAdvisor's Tourism page for Stratton <4>
- Grants Camps
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Grants Camps have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grants Camps
- Grants Camps is located in Franklin County
- Kennebago
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Kennebago have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kennebago
- Kennebago is located in Franklin County
- The Landing
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for The Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for The Landing
- The Landing is located in Franklin County
- Langtown Mill
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Langtown Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Langtown Mill
- Langtown Mill is located in Franklin County
- Davis Town
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Davis Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Davis Town
- Davis Town is located in Franklin County
- Coplin Plantation
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Coplin Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coplin Plantation
- Coplin Plantation is located in Franklin County
- Population from the 2020 Census: 158 people
- Lowelltown
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Lowelltown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Lowelltown
- Lowelltown is located in Franklin County
- Continue List (28 more) ...
- Loon Lake
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Loon Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loon Lake
- Loon Lake is located in Franklin County
- Skinner
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Skinner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skinner
- Skinner is located in Franklin County
- Dallas Plantation
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Dallas Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas Plantation
- Dallas Plantation is located in Franklin County
- Population from the 2020 Census: 294 people
- Dallas
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas
- Dallas is located in Franklin County
- Dead River ‑ Historic
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Dead River have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dead River
- Dead River is located in Franklin County
- Kamankeag ‑ Historic
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Kamankeag have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kamankeag
- Kamankeag is located in Franklin County
- Keough
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Keough have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Keough
- Keough is located in Franklin County
- Rangeley
(20 miles [32.2 km] to the south)
- Bigelow
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Bigelow
- Bigelow is located in Franklin County
- Mingo Springs
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Mingo Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mingo Springs
- Mingo Springs is located in Franklin County
- Mountainview
(21 miles [33.8 km] to the south)
- Jump to our Gazetteer entry for Mountainview
- Mountainview is located in Franklin County
- Oquossoc
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Oquossoc have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oquossoc
- Oquossoc is located in Franklin County
- Jump to TripAdvisor's Tourism page for Oquossoc <4>
- Redington
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Redington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redington
- Redington is located in Franklin County
- Mooselookmeguntic
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Mooselookmeguntic have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mooselookmeguntic
- Mooselookmeguntic is located in Franklin County
- Carrabassett Valley
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Carrabassett Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrabassett Valley
- Carrabassett Valley is located in Franklin County
- Population from the 2020 Census: 788 people
- Jump to TripAdvisor's Tourism page for Carrabassett Valley <4>
- Macy
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Macy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macy
- Macy is located in Franklin County
- South Rangeley
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for South Rangeley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Rangeley
- South Rangeley is located in Franklin County
- Carrabassett
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Carrabassett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carrabassett
- Carrabassett is located in Franklin County
- Sandy River Plantation
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Sandy River Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sandy River Plantation
- Sandy River Plantation is located in Franklin County
- Population from the 2020 Census: 127 people
- Barnjum
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Barnjum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnjum
- Barnjum is located in Franklin County
- Perham Junction
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Perham Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perham Junction
- Perham Junction is located in Franklin County
- East Madrid
(27 miles [43.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for East Madrid. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for East Madrid
- East Madrid is located in Franklin County
- Bemis
(28 miles [45.1 km] to the south)
- Jump to our Gazetteer entry for Bemis
- Bemis is located in Franklin County
- Madrid
(28 miles [45.1 km] to the south)
- Reeds
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Reeds have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reeds
- Reeds is located in Franklin County
- Madrid Junction
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Madrid Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madrid Junction
- Madrid Junction is located in Franklin County
- Soule Mill
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Soule Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Soule Mill
- Soule Mill is located in Franklin County
- Salem
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Franklin County
- Oxford County
- County Website: www.oxfordcounty.org/
- County Seat for Oxford: South Paris
- Note: The Canadian Province of Quebec lies to the north
- Genealogy Websites ...
- Nearest Communities to Round Mountain ...
- These communities are listed by their distance from Round Mountain.
- Pleasant Island
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Pleasant Island have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Island
- Pleasant Island is located in Oxford County
- Bald Mountain
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Bald Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bald Mountain
- Bald Mountain is located in Oxford County
- Upper Dam
(28 miles [45.1 km] to the south)
- Jump to our Gazetteer entry for Upper Dam
- Upper Dam is located in Oxford County
- Lincoln Plantation
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Lincoln Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lincoln Plantation
- Lincoln Plantation is located in Oxford County
- Population from the 2020 Census: 44 people
- Wilsons Mills
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wilsons Mills. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Wilsons Mills
- Wilsons Mills is located in Oxford County
- Somerset County
- County Seat for Somerset: Skowhegan
- Note: The Canadian Province of Quebec lies to the north
- Genealogy Websites ...
- Nearest Communities to Round Mountain ...
- These communities are listed by their distance from Round Mountain.
- Spring Lake
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Spring Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Lake
- Spring Lake is located in Somerset County
- Spring Lake Landing
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Spring Lake Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Lake Landing
- Spring Lake Landing is located in Somerset County
- Hayden Landing
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Hayden Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hayden Landing
- Hayden Landing is located in Somerset County
- Holeb
(23 miles [37 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Holeb. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Holeb
- Holeb is located in Somerset County
- Three Streams
(25 miles [40.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Three Streams have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Streams
- Three Streams is located in Somerset County
- Attean ‑ Historic
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Attean have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Attean
- Attean is located in Somerset County
- Attean Landing
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Attean Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Attean Landing
- Attean Landing is located in Somerset County
- Highland Plantation
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Highland Plantation have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland Plantation
- Highland Plantation is located in Somerset County
- Population from the 2020 Census: 69 people
- West Forks
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for West Forks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Forks
- West Forks is located in Somerset County
- Jump to TripAdvisor's Tourism page for West Forks <4>
- Dyerville
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Dyerville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dyerville
- Dyerville is located in Somerset County
- Coos County
- County Seat for Coos: Lancaster (NH)
- Note: The Canadian Province of Quebec lies to the north
- Genealogy Websites ...
- Nearest Communities to Round Mountain ...
- These communities are listed by their distance from Round Mountain.
- Idlewilde
(27 miles [43.5 km] to the west)
- Jump to our Gazetteer entry for Idlewilde
- Idlewilde is located in Coos County (NH)
- Atkinson and Gilmanton Academy
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Atkinson and Gilmanton Academy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atkinson and Gilmanton Academy
- Atkinson and Gilmanton Academy is located in Coos County (NH)
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Round Mountain) to Point B.Our distance measurements begin at a specific point in Round Mountain. The point we use is located at these GPS coordinates - Latitude: 45.2642, Longitude: -70.6395 In this case, the coordinates for Round Mountain have been provided by the Geographic Names Information System (GNIS). |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |