RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Knox County >> Rockport >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Rockport. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Rockport.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Rockport - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 68 communities listed:

  • Albion
    (30 miles [48.3 km] to the northwest)
  • Alna
    (26 miles [41.8 km] to the west)
    • Jump to our Gazetteer entry for Alna
    • Alna is located in Lincoln County
    • Population from the 2020 Census: 763 people
    • Jump to TripAdvisor's Tourism page for Alna <2>
  • Appleton
    (11 miles [17.7 km] to the northwest)
  • Belfast
    (16 miles [25.7 km] to the north)
  • Blue Hill
    (28 miles [45.1 km] to the northeast)
  • Bremen
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bremen have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bremen
    • Bremen is located in Lincoln County
    • Population from the 2020 Census: 814 people
    • Jump to TripAdvisor's Tourism page for Bremen <2>
  • Bristol
    (26 miles [41.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bristol have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bristol
    • Bristol is located in Lincoln County
    • Population from the 2020 Census: 2,796 people
    • Jump to TripAdvisor's Tourism page for Bristol <2>
  • Brooklin
    (25 miles [40.2 km] to the east)
  • Brooks
    (25 miles [40.2 km] to the north)
  • Brooksville
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brooksville
    • Brooksville is located in Hancock County
    • Population from the 2020 Census: 910 people
    • Jump to TripAdvisor's Tourism page for Brooksville <2>
  • Bucksport
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bucksport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bucksport
    • Bucksport is located in Hancock County
    • Population from the 2020 Census: 4,916 people
    • Jump to TripAdvisor's Tourism page for Bucksport <2>
  • Camden
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Camden have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Camden
    • Camden is located in Knox County
    • Population from the 2020 Census: 4,806 people
    • Jump to TripAdvisor's Tourism page for Camden <2>
  • Castine
    (19 miles [30.6 km] to the northeast)
  • Chamberlain
    (28 miles [45.1 km] to the southwest)
  • China
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for China have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for China
    • China is located in Kennebec County
    • Population from the 2020 Census: 4,339 people
    • Jump to TripAdvisor's Tourism page for China <2>
  • Coopers Mills
    (24 miles [38.6 km] to the west)
    • Note: The GPS coordinates that we are using for Coopers Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coopers Mills
    • Coopers Mills is located in Lincoln County
    • Jump to TripAdvisor's Tourism page for Coopers Mills <2>
  • Cushing
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Cushing have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cushing
    • Cushing is located in Knox County
    • Population from the 2020 Census: 1,500 people
    • Jump to TripAdvisor's Tourism page for Cushing <2>
  • Damariscotta
    (24 miles [38.6 km] to the southwest)
  • Deer Isle
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Isle
    • Deer Isle is located in Hancock County
    • Population from the 2020 Census: 1,911 people
    • Jump to TripAdvisor's Tourism page for Deer Isle <2>
  • Frankfort
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Frankfort have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frankfort
    • Frankfort is located in Waldo County
    • Population from the 2020 Census: 1,196 people
    • Jump to TripAdvisor's Tourism page for Frankfort <2>
  • Freedom
    (26 miles [41.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Freedom have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Freedom
    • Freedom is located in Waldo County
    • Population from the 2020 Census: 732 people
    • Jump to TripAdvisor's Tourism page for Freedom <2>
  • Friendship
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Friendship have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Friendship
    • Friendship is located in Knox County
    • Population from the 2020 Census: 1,143 people
    • Jump to TripAdvisor's Tourism page for Friendship <2>
  • Harborside
    (17 miles [27.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Harborside have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harborside
    • Harborside is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Harborside <2>
  • Hope
    (6 miles [9.7 km] to the northwest)
  • Isle Au Haut
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Isle Au Haut have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Isle Au Haut
    • Isle Au Haut is located in Knox County
    • Population from the 2020 Census: 65 people
    • Jump to TripAdvisor's Tourism page for Isle Au Haut <2>
  • Jefferson
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Jefferson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jefferson
    • Jefferson is located in Lincoln County
    • Population from the 2020 Census: 2,470 people
    • Jump to TripAdvisor's Tourism page for Jefferson <2>
  • Liberty
    (18 miles [29 km] to the northwest)
    • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty
    • Liberty is located in Waldo County
    • Population from the 2020 Census: 977 people
    • Jump to TripAdvisor's Tourism page for Liberty <2>
  • Lincolnville Center
    (7 miles [11.3 km] to the north)
  • Lincolnville
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lincolnville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lincolnville
    • Lincolnville is located in Waldo County
    • Population from the 2020 Census: 2,252 people
    • Jump to TripAdvisor's Tourism page for Lincolnville <2>
  • Little Deer Isle
    (20 miles [32.2 km] to the east)
  • Matinicus
    (24 miles [38.6 km] to the southeast)
  • Morrill
    (18 miles [29 km] to the north)
  • New Harbor
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for New Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Harbor
    • New Harbor is located in Lincoln County
    • Jump to TripAdvisor's Tourism page for New Harbor <2>
  • Newcastle
    (25 miles [40.2 km] to the southwest)
  • Nobleboro
    (21 miles [33.8 km] to the west)
  • North Haven
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for North Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Haven
    • North Haven is located in Knox County
    • Population from the 2020 Census: 358 people
    • Jump to TripAdvisor's Tourism page for North Haven <2>
  • Northport
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Northport
    • Northport is located in Waldo County
    • Population from the 2020 Census: 1,593 people
    • Jump to TripAdvisor's Tourism page for Northport <2>
  • Owls Head
    (7 miles [11.3 km] to the south)
  • Palermo
    (24 miles [38.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Palermo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Palermo
    • Palermo is located in Waldo County
    • Population from the 2020 Census: 1,525 people
    • Jump to TripAdvisor's Tourism page for Palermo <2>
  • Pemaquid
    (29 miles [46.7 km] to the southwest)
  • Penobscot
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penobscot
    • Penobscot is located in Hancock County
    • Population from the 2020 Census: 1,220 people
    • Jump to TripAdvisor's Tourism page for Penobscot <2>
  • Port Clyde
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Port Clyde have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Port Clyde
    • Port Clyde is located in Knox County
    • Jump to TripAdvisor's Tourism page for Port Clyde <2>
  • Prospect
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prospect
    • Prospect is located in Waldo County
    • Population from the 2020 Census: 750 people
    • Jump to TripAdvisor's Tourism page for Prospect <2>
  • Rockland
    (5 miles [8 km] to the south)
  • Round Pond
    (25 miles [40.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Round Pond have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Round Pond
    • Round Pond is located in Lincoln County
    • Jump to TripAdvisor's Tourism page for Round Pond <2>
  • Sandy Point
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Sandy Point have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandy Point
    • Sandy Point is located in Waldo County
    • Jump to TripAdvisor's Tourism page for Sandy Point <2>
  • Searsmont
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Searsmont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Searsmont
    • Searsmont is located in Waldo County
    • Population from the 2020 Census: 1,424 people
    • Jump to TripAdvisor's Tourism page for Searsmont <2>
  • Searsport
    (20 miles [32.2 km] to the north)
  • Sedgwick
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Sedgwick have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sedgwick
    • Sedgwick is located in Hancock County
    • Population from the 2020 Census: 1,175 people
    • Jump to TripAdvisor's Tourism page for Sedgwick <2>
  • South China
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for South China have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South China
    • South China is located in Kennebec County
    • Jump to TripAdvisor's Tourism page for South China <2>
  • South Thomaston
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for South Thomaston have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Thomaston
    • South Thomaston is located in Knox County
    • Population from the 2020 Census: 1,642 people
    • Jump to TripAdvisor's Tourism page for South Thomaston <2>
  • Spruce Head
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Spruce Head have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spruce Head
    • Spruce Head is located in Knox County
    • Jump to TripAdvisor's Tourism page for Spruce Head <2>
  • Stockton Springs
    (23 miles [37 km] to the northeast)
    • Note: The GPS coordinates that we are using for Stockton Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stockton Springs
    • Stockton Springs is located in Waldo County
    • Population from the 2020 Census: 1,640 people
    • Jump to TripAdvisor's Tourism page for Stockton Springs <2>
  • Stonington
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Stonington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stonington
    • Stonington is located in Hancock County
    • Population from the 2020 Census: 1,033 people
    • Jump to TripAdvisor's Tourism page for Stonington <2>
  • Sunset
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Sunset have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sunset
    • Sunset is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Sunset <2>
  • Swanville
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Swanville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swanville
    • Swanville is located in Waldo County
    • Population from the 2020 Census: 1,359 people
    • Jump to TripAdvisor's Tourism page for Swanville <2>
  • Tenants Harbor
    (16 miles [25.7 km] to the southwest)
  • Thomaston
    (8 miles [12.9 km] to the southwest)
  • Thorndike
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Thorndike have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thorndike
    • Thorndike is located in Waldo County
    • Population from the 2020 Census: 897 people
    • Jump to TripAdvisor's Tourism page for Thorndike <2>
  • Union
    (9 miles [14.5 km] to the west)
    • Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union
    • Union is located in Knox County
    • Population from the 2020 Census: 2,275 people
    • Jump to TripAdvisor's Tourism page for Union <2>
  • Vinalhaven
    (15 miles [24.1 km] to the southeast)
  • Waldoboro
    (16 miles [25.7 km] to the southwest)
  • Walpole
    (28 miles [45.1 km] to the southwest)
  • Warren
    (9 miles [14.5 km] to the southwest)
  • Washington
    (15 miles [24.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Washington
    • Washington is located in Knox County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Washington <2>
  • West Rockport
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for West Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Rockport
    • West Rockport is located in Knox County
    • Jump to TripAdvisor's Tourism page for West Rockport <2>
  • Whitefield
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Whitefield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitefield
    • Whitefield is located in Lincoln County
    • Population from the 2020 Census: 2,281 people
    • Jump to TripAdvisor's Tourism page for Whitefield <2>
  • Windsor
    (26 miles [41.8 km] to the west)
    • Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Windsor
    • Windsor is located in Kennebec County
    • Population from the 2020 Census: 2,620 people
    • Jump to TripAdvisor's Tourism page for Windsor <2>

The official website for Rockport: www.town.rockport.me.us/

The official website for Knox County: www.knoxcounty.midcoast.com/

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Rockport) to Point B.Our distance measurements begin at a specific point in Rockport. The point we use is located at these GPS coordinates - Latitude: 44.1845, Longitude: -69.0761       In this case, the coordinates for Rockport have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024