|
Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Plummer Mill, we use the following websites to find information relevant to Plummer Mill and the surrounding area.
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above
website can help you to find your way around the night-time sky. In addition to detailed
sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above,
we pass this GPS location for Plummer Mill:
- 43.983688, -70.100886
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- Open the Heavens-Above website centered on Plummer Mill
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Androscoggin County as the starting point when you click on the link below:
- Open the eBird sighting report for Androscoggin County
- Since Plummer Mill is near Sagadahoc County and also Cumberland County, we have provided a link to their eBird sighting reports:
- Open the eBird sighting report for Sagadahoc County
- Open the eBird sighting report for Cumberland County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Open the Waymark.com report for Plummer Mill
Curious and Interesting Names Near Plummer Mill ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Danville
(8 miles [12.9 km] to the west)
- Danville is located in Androscoggin County
- Jump to our Gazetteer entry for Danville
- Deep Cut
(6 miles [9.7 km] to the southeast)
- Deep Cut is located in Cumberland County
- Jump to our Gazetteer entry for Deep Cut
- Drinkwater Corner
(8 miles [12.9 km] to the north)
- Drinkwater Corner is located in Androscoggin County
- Jump to our Gazetteer entry for Drinkwater Corner
- Foggs Corner
(7 miles [11.3 km] to the southwest)
- Foggs Corner is located in Cumberland County
- Jump to our Gazetteer entry for Foggs Corner
- Freeport
(8 miles [12.9 km] to the south)
- Growstown
(7 miles [11.3 km] to the southeast)
- Growstown is located in Cumberland County
- Jump to our Gazetteer entry for Growstown
- Hillside
(6 miles [9.7 km] to the southeast)
- Hillside is located in Cumberland County
- Jump to our Gazetteer entry for Hillside
- Lisbon
(3 miles [4.8 km] to the north)
- Mast Landing
(8 miles [12.9 km] to the south)
- Mast Landing is located in Cumberland County
- Jump to our Gazetteer entry for Mast Landing
- Murphy Corner
(7 miles [11.3 km] to the northwest)
- Murphy Corner is located in Androscoggin County
- Jump to our Gazetteer entry for Murphy Corner
- Pleasant Hill
(7 miles [11.3 km] to the south)
- Pleasant Hill is located in Cumberland County
- Jump to our Gazetteer entry for Pleasant Hill
- Robinson Corner
(6 miles [9.7 km] to the north)
- Robinson Corner is located in Androscoggin County
- Jump to our Gazetteer entry for Robinson Corner
- Royal Corner
(7 miles [11.3 km] to the west)
- Royal Corner is located in Androscoggin County
- Jump to our Gazetteer entry for Royal Corner
How Far From Plummer Mill to ...
We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Plummer Mill to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance<2> beginning in Plummer Mill and extending to:
- Auburn, which is the Seat of Androscoggin County, lies 10 miles [16.1 km]<2> to the northwest. If you could walk a straight line from Plummer Mill to Auburn, with an average speed<3> of 2.2 miles [3.5 km] per hour, it would take four to five hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take a little over three hours.
- Augusta, which is the State Capital of Maine, lies 27 miles [43.5 km] to the northeast (NE). The buggy would take just over a day and walking would take just about two full days.
- The White House (Washington, DC) is 501 miles [806.3 km] to the southwest (SW). Driving, with an average speed of 63 miles [101.4 km] per hour, would take most of a day, a buggy would take 20 days and walking would take 29 days.
- The shortest distance<4> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 5,401 miles [8,692.1 km] and it lies to the east northeast (ENE).<5>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,114 miles [9,839.5 km] and it lies to the east northeast (ENE).<6>
- The distance to Saint Peter's Basilica (The Vatican) is 3,989 miles [6,419.7 km] and it lies to the east northeast (ENE).<7>'
Footnotes ...
| <1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Plummer Mill) to Point B. In other words: 'As the crow flies'. |
| <3> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <4> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Plummer Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.Our distance measurements begin at a specific point in Plummer Mill. The point we use is located at these GPS coordinates - Latitude: 43.9837, Longitude: -70.1009 In this case, the coordinates for Plummer Mill have been provided by the Geographic Names Information System (GNIS). |
| <5> | The calculated bearing (or angle) to Jerusalem is 303.131 degrees. |
| <6> | The calculated bearing (or angle) to Mecca is 298.901 degrees. |
| <7> | The calculated bearing (or angle) to the Vatican is 299.266 degrees. |
|
|