RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Kennebec County >> Mount Vernon >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Maine


The Commemorative Quarter for Maine







TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Mount Vernon. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Mount Vernon.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Mount Vernon - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Kennebec County.

Our list sorts the communities in alphabetical order. There are 68 communities listed:

  • Albion
    (26 miles [41.8 km] to the east)
  • Anson
    (21 miles [33.8 km] to the north)
    • Jump to our Gazetteer entry for Anson
    • Anson is located in Somerset County
    • Population from the 2020 Census: 2,397 people
    • Jump to TripAdvisor's Tourism page for Anson <2>
  • Auburn
    (30 miles [48.3 km] to the southwest)
    • Jump to our Gazetteer entry for Auburn
    • Auburn is located in Androscoggin County
    • Population from the 2020 Census: 23,410 people
    • Jump to TripAdvisor's Tourism page for Auburn <2>
  • Augusta
    (16 miles [25.7 km] to the southeast)
  • Belgrade Lakes
    (5 miles [8 km] to the east)
  • Belgrade
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Belgrade have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belgrade
    • Belgrade is located in Kennebec County
    • Population from the 2020 Census: 3,150 people
    • Jump to TripAdvisor's Tourism page for Belgrade <2>
  • Buckfield
    (23 miles [37 km] to the southwest)
  • Canaan
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Canaan have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Canaan
    • Canaan is located in Somerset County
    • Population from the 2020 Census: 2,168 people
    • Jump to TripAdvisor's Tourism page for Canaan <2>
  • Chelsea
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Chelsea have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chelsea
    • Chelsea is located in Kennebec County
    • Population from the 2020 Census: 2,753 people
    • Jump to TripAdvisor's Tourism page for Chelsea <2>
  • China
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for China have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for China
    • China is located in Kennebec County
    • Population from the 2020 Census: 4,339 people
    • Jump to TripAdvisor's Tourism page for China <2>
  • Clinton
    (25 miles [40.2 km] to the east)
  • Coopers Mills
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Coopers Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coopers Mills
    • Coopers Mills is located in Lincoln County
    • Jump to TripAdvisor's Tourism page for Coopers Mills <2>
  • Dixfield
    (23 miles [37 km] to the west)
  • Dresden
    (30 miles [48.3 km] to the southeast)
  • East Winthrop
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for East Winthrop have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Winthrop
    • East Winthrop is located in Kennebec County
    • Jump to TripAdvisor's Tourism page for East Winthrop <2>
  • Fairfield
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairfield
    • Fairfield is located in Somerset County
    • Population from the 2020 Census: 6,552 people
    • Jump to TripAdvisor's Tourism page for Fairfield <2>
  • Farmingdale
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Farmingdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmingdale
    • Farmingdale is located in Kennebec County
    • Population from the 2020 Census: 2,925 people
    • Jump to TripAdvisor's Tourism page for Farmingdale <2>
  • Farmington Falls
    (9 miles [14.5 km] to the northwest)
  • Farmington
    (14 miles [22.5 km] to the northwest)
  • Fayette
    (6 miles [9.7 km] to the south)
  • Gardiner
    (21 miles [33.8 km] to the southeast)
  • Greene
    (22 miles [35.4 km] to the south)
    • Note: The GPS coordinates that we are using for Greene have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greene
    • Greene is located in Androscoggin County
    • Population from the 2020 Census: 4,347 people
    • Jump to TripAdvisor's Tourism page for Greene <2>
  • Hallowell
    (17 miles [27.4 km] to the southeast)
  • Hebron
    (29 miles [46.7 km] to the southwest)
  • Jay
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Jay have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jay
    • Jay is located in Franklin County
    • Population from the 2020 Census: 4,598 people
    • Jump to TripAdvisor's Tourism page for Jay <2>
  • Kents Hill
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Kents Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kents Hill
    • Kents Hill is located in Kennebec County
    • Jump to TripAdvisor's Tourism page for Kents Hill <2>
  • Leeds
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Leeds have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leeds
    • Leeds is located in Androscoggin County
    • Population from the 2020 Census: 2,320 people
    • Jump to TripAdvisor's Tourism page for Leeds <2>
  • Lewiston
    (29 miles [46.7 km] to the south)
    • Jump to our Gazetteer entry for Lewiston
    • Lewiston is located in Androscoggin County
    • Population from the 2020 Census: 36,226 people
    • Jump to TripAdvisor's Tourism page for Lewiston <2>
  • Litchfield
    (24 miles [38.6 km] to the south)
  • Livermore Falls
    (10 miles [16.1 km] to the west)
  • Livermore
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Livermore have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Livermore
    • Livermore is located in Androscoggin County
    • Population from the 2020 Census: 2,131 people
    • Jump to TripAdvisor's Tourism page for Livermore <2>
  • Madison
    (21 miles [33.8 km] to the north)
    • Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Madison
    • Madison is located in Somerset County
    • Population from the 2020 Census: 4,696 people
    • Jump to TripAdvisor's Tourism page for Madison <2>
  • Manchester
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Manchester
    • Manchester is located in Kennebec County
    • Population from the 2020 Census: 2,555 people
    • Jump to TripAdvisor's Tourism page for Manchester <2>
  • Mexico
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Mexico have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mexico
    • Mexico is located in Oxford County
    • Population from the 2020 Census: 2,635 people
    • Jump to TripAdvisor's Tourism page for Mexico <2>
  • Monmouth
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Monmouth have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monmouth
    • Monmouth is located in Kennebec County
    • Population from the 2020 Census: 4,172 people
    • Jump to TripAdvisor's Tourism page for Monmouth <2>
  • New Portland
    (26 miles [41.8 km] to the north)
  • New Sharon
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for New Sharon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Sharon
    • New Sharon is located in Franklin County
    • Population from the 2020 Census: 1,424 people
    • Jump to TripAdvisor's Tourism page for New Sharon <2>
  • Norridgewock
    (17 miles [27.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Norridgewock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norridgewock
    • Norridgewock is located in Somerset County
    • Population from the 2020 Census: 3,227 people
    • Jump to TripAdvisor's Tourism page for Norridgewock <2>
  • North Anson
    (24 miles [38.6 km] to the north)
    • Note: The GPS coordinates that we are using for North Anson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Anson
    • North Anson is located in Somerset County
    • Jump to TripAdvisor's Tourism page for North Anson <2>
  • North Monmouth
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for North Monmouth have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Monmouth
    • North Monmouth is located in Kennebec County
    • Jump to TripAdvisor's Tourism page for North Monmouth <2>
  • North New Portland
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for North New Portland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North New Portland
    • North New Portland is located in Somerset County
    • Jump to TripAdvisor's Tourism page for North New Portland <2>
  • Oakland
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Oakland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakland
    • Oakland is located in Kennebec County
    • Population from the 2020 Census: 6,341 people
    • Jump to TripAdvisor's Tourism page for Oakland <2>
  • Palermo
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for Palermo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Palermo
    • Palermo is located in Waldo County
    • Population from the 2020 Census: 1,525 people
    • Jump to TripAdvisor's Tourism page for Palermo <2>
  • Peru
    (20 miles [32.2 km] to the west)
    • Note: The GPS coordinates that we are using for Peru have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Peru
    • Peru is located in Oxford County
    • Population from the 2020 Census: 1,509 people
    • Jump to TripAdvisor's Tourism page for Peru <2>
  • Phillips
    (28 miles [45.1 km] to the northwest)
  • Randolph
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Randolph have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Randolph
    • Randolph is located in Kennebec County
    • Population from the 2020 Census: 1,710 people
    • Jump to TripAdvisor's Tourism page for Randolph <2>
  • Readfield
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Readfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Readfield
    • Readfield is located in Kennebec County
    • Population from the 2020 Census: 2,586 people
    • Jump to TripAdvisor's Tourism page for Readfield <2>
  • Richmond
    (29 miles [46.7 km] to the south)
  • Rome
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rome have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rome
    • Rome is located in Kennebec County
    • Population from the 2020 Census: 1,013 people
    • Jump to TripAdvisor's Tourism page for Rome <2>
  • Rumford
    (27 miles [43.5 km] to the west)
  • Sabattus
    (26 miles [41.8 km] to the south)
  • Skowhegan
    (22 miles [35.4 km] to the northeast)
  • Smithfield
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Smithfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Smithfield
    • Smithfield is located in Somerset County
    • Population from the 2020 Census: 1,008 people
    • Jump to TripAdvisor's Tourism page for Smithfield <2>
  • South China
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for South China have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South China
    • South China is located in Kennebec County
    • Jump to TripAdvisor's Tourism page for South China <2>
  • Strong
    (24 miles [38.6 km] to the northwest)
  • Sumner
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Sumner have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sumner
    • Sumner is located in Oxford County
    • Population from the 2020 Census: 920 people
    • Jump to TripAdvisor's Tourism page for Sumner <2>
  • Turner
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Turner have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Turner
    • Turner is located in Androscoggin County
    • Population from the 2020 Census: 5,878 people
    • Jump to TripAdvisor's Tourism page for Turner <2>
  • Vassalboro
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Vassalboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vassalboro
    • Vassalboro is located in Kennebec County
    • Population from the 2020 Census: 4,420 people
    • Jump to TripAdvisor's Tourism page for Vassalboro <2>
  • Vienna
    (2 miles [3.2 km] to the north)
  • Waterville
    (17 miles [27.4 km] to the east)
  • Wayne
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wayne
    • Wayne is located in Kennebec County
    • Population from the 2020 Census: 1,161 people
    • Jump to TripAdvisor's Tourism page for Wayne <2>
  • Weld
    (25 miles [40.2 km] to the northwest)
    • Jump to our Gazetteer entry for Weld
    • Weld is located in Franklin County
    • Population from the 2020 Census: 417 people
    • Jump to TripAdvisor's Tourism page for Weld <2>
  • Whitefield
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Whitefield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitefield
    • Whitefield is located in Lincoln County
    • Population from the 2020 Census: 2,281 people
    • Jump to TripAdvisor's Tourism page for Whitefield <2>
  • Wilton
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilton
    • Wilton is located in Franklin County
    • Population from the 2020 Census: 3,929 people
    • Jump to TripAdvisor's Tourism page for Wilton <2>
  • Windsor
    (24 miles [38.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Windsor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Windsor
    • Windsor is located in Kennebec County
    • Population from the 2020 Census: 2,620 people
    • Jump to TripAdvisor's Tourism page for Windsor <2>
  • Winslow
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Winslow have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winslow
    • Winslow is located in Kennebec County
    • Population from the 2020 Census: 7,654 people
    • Jump to TripAdvisor's Tourism page for Winslow <2>
  • Winthrop
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Winthrop have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winthrop
    • Winthrop is located in Kennebec County
    • Population from the 2020 Census: 6,029 people
    • Jump to TripAdvisor's Tourism page for Winthrop <2>
  • Woodstock
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Woodstock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodstock
    • Woodstock is located in Oxford County
    • Population from the 2020 Census: 1,308 people
    • Jump to TripAdvisor's Tourism page for Woodstock <2>

Unfortunately, we don't know of an official website for Mount Vernon. If you can help, please contact us through our Feedback Page.

The official website for Kennebec County: www.kennebeccounty.org/

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Mount Vernon) to Point B.Our distance measurements begin at a specific point in Mount Vernon. The point we use is located at these GPS coordinates - Latitude: 44.5012, Longitude: -69.9876       In this case, the coordinates for Mount Vernon have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024