RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Oxford County >> Middle Dam >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Middle Dam had a population of 19 people in 1895 with a post office and no railroad service.

The following communities are listed based on their distance from Middle Dam, with the one closest to Middle Dam listed first.

  • Upton
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Upton
    • Upton is located in Oxford County
    • Population from the 2020 Census: 110 people
    • Jump to TripAdvisor's Tourism page for Upton <3>
  • Bemis
    (10 miles [16.1 km] to the northeast)
  • Errol
    (10 miles [16.1 km] to the west)
  • Andover
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Andover
    • Andover is located in Oxford County
    • Population from the 2020 Census: 838 people
    • Jump to TripAdvisor's Tourism page for Andover <3>
  • Wilsons Mills
    (12 miles [19.3 km] to the northwest)
  • Byron
    (14 miles [22.5 km] to the east)
  • South Andover
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for South Andover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Andover
    • South Andover is located in Oxford County
  • North Newry
    (16 miles [25.7 km] to the south)
  • Dummer
    (17 miles [27.4 km] to the southwest)
  • Roxbury
    (17 miles [27.4 km] to the southeast)
  • Rangeley
    (18 miles [29 km] to the northeast)
  • Milan
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Milan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milan
    • Milan is located in Coos County (NH)
    • Population from the 2020 Census: 1,233 people
    • Jump to TripAdvisor's Tourism page for Milan <3>
  • Frye
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Frye have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frye
    • Frye is located in Oxford County
  • Newry
    (21 miles [33.8 km] to the south)
  • Crystal
    (22 miles [35.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Crystal have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crystal
    • Crystal is located in Coos County (NH)
  • West Milan
    (22 miles [35.4 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for West Milan. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for West Milan
    • West Milan is located in Coos County (NH)
    • Google driving directions:
    • From your current location to West Milan
    • From Middle Dam to West Milan
  • Hanover
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hanover
    • Hanover is located in Oxford County
    • Population from the 2020 Census: 261 people
    • Jump to TripAdvisor's Tourism page for Hanover <3>
  • Rumford Point
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Rumford Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rumford Point
    • Rumford Point is located in Oxford County
    • Jump to TripAdvisor's Tourism page for Rumford Point <3>
  • Dead River ‑ Historic
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dead River have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dead River
    • Dead River is located in Franklin County
  • East Bethel
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for East Bethel have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Bethel
    • East Bethel is located in Oxford County
  • Rumford Center
    (23 miles [37 km] to the southeast)
  • Rumford
    (23 miles [37 km] to the southeast)
  • Mexico
    (23 miles [37 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mexico have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mexico
    • Mexico is located in Oxford County
    • Population from the 2020 Census: 2,635 people
    • Jump to TripAdvisor's Tourism page for Mexico <3>
  • Madrid
    (23 miles [37 km] to the east)
  • Percy
    (25 miles [40.2 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Percy. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Percy
    • Percy is located in Coos County (NH)
    • Google driving directions:
    • From your current location to Percy
    • From Middle Dam to Percy
  • South Rumford
    (25 miles [40.2 km] to the southeast)
  • Berry Mills
    (25 miles [40.2 km] to the southeast)
  • Weld
    (25 miles [40.2 km] to the east)
  • Clarksville
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarksville
    • Clarksville is located in Coos County (NH)
    • Population from the 2020 Census: 249 people

The official website for Oxford County: www.oxfordcounty.org/

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Middle Dam, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025