RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Oxford County >> Mexico >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Mexico. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Mexico.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Mexico - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Oxford County.

Our list sorts the communities in alphabetical order. There are 48 communities listed:

  • Andover
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Andover
    • Andover is located in Oxford County
    • Population from the 2020 Census: 838 people
    • Jump to TripAdvisor's Tourism page for Andover <3>
  • Bethel
    (16 miles [25.7 km] to the southwest)
  • Bryant Pond
    (13 miles [20.9 km] to the south)
  • Buckfield
    (20 miles [32.2 km] to the southeast)
  • Dixfield
    (4 miles [6.4 km] to the east)
  • East Stoneham
    (25 miles [40.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for East Stoneham have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Stoneham
    • East Stoneham is located in Oxford County
    • Jump to TripAdvisor's Tourism page for East Stoneham <3>
  • Farmington Falls
    (23 miles [37 km] to the east)
  • Farmington
    (20 miles [32.2 km] to the east)
  • Fayette
    (27 miles [43.5 km] to the east)
  • Greenwood
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Greenwood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenwood
    • Greenwood is located in Oxford County
    • Population from the 2020 Census: 806 people
    • Jump to TripAdvisor's Tourism page for Greenwood <3>
  • Hanover
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hanover
    • Hanover is located in Oxford County
    • Population from the 2020 Census: 261 people
    • Jump to TripAdvisor's Tourism page for Hanover <3>
  • Hebron
    (25 miles [40.2 km] to the south)
  • Jay
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Jay have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jay
    • Jay is located in Franklin County
    • Population from the 2020 Census: 4,598 people
    • Jump to TripAdvisor's Tourism page for Jay <3>
  • Kents Hill
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Kents Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kents Hill
    • Kents Hill is located in Kennebec County
    • Jump to TripAdvisor's Tourism page for Kents Hill <3>
  • Leeds
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Leeds have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leeds
    • Leeds is located in Androscoggin County
    • Population from the 2020 Census: 2,320 people
    • Jump to TripAdvisor's Tourism page for Leeds <3>
  • Livermore Falls
    (18 miles [29 km] to the east)
  • Livermore
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Livermore have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Livermore
    • Livermore is located in Androscoggin County
    • Population from the 2020 Census: 2,131 people
    • Jump to TripAdvisor's Tourism page for Livermore <3>
  • Locke Mills
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Locke Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Locke Mills
    • Locke Mills is located in Oxford County
    • Jump to TripAdvisor's Tourism page for Locke Mills <3>
  • Madrid
    (21 miles [33.8 km] to the north)
  • Mount Vernon
    (27 miles [43.5 km] to the east)
    • Note: The GPS coordinates that we are using for Mount Vernon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Vernon
    • Mount Vernon is located in Kennebec County
    • Population from the 2020 Census: 1,706 people
    • Jump to TripAdvisor's Tourism page for Mount Vernon <3>
  • New Sharon
    (26 miles [41.8 km] to the east)
    • Note: The GPS coordinates that we are using for New Sharon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Sharon
    • New Sharon is located in Franklin County
    • Population from the 2020 Census: 1,424 people
    • Jump to TripAdvisor's Tourism page for New Sharon <3>
  • Newry
    (12 miles [19.3 km] to the southwest)
  • North Waterford
    (25 miles [40.2 km] to the southwest)
  • Norway
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Norway have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norway
    • Norway is located in Oxford County
    • Population from the 2020 Census: 4,990 people
    • Jump to TripAdvisor's Tourism page for Norway <3>
  • Oquossoc
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Oquossoc have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oquossoc
    • Oquossoc is located in Franklin County
    • Jump to TripAdvisor's Tourism page for Oquossoc <3>
  • Oxford
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Oxford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oxford
    • Oxford is located in Oxford County
    • Population from the 2020 Census: 4,102 people
    • Jump to TripAdvisor's Tourism page for Oxford <3>
  • Peru
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Peru have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Peru
    • Peru is located in Oxford County
    • Population from the 2020 Census: 1,509 people
    • Jump to TripAdvisor's Tourism page for Peru <3>
  • Phillips
    (20 miles [32.2 km] to the northeast)
  • Rangeley
    (28 miles [45.1 km] to the north)
  • Readfield
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Readfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Readfield
    • Readfield is located in Kennebec County
    • Population from the 2020 Census: 2,586 people
    • Jump to TripAdvisor's Tourism page for Readfield <3>
  • Roxbury
    (7 miles [11.3 km] to the north)
  • Rumford Center
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rumford Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rumford Center
    • Rumford Center is located in Oxford County
    • Jump to TripAdvisor's Tourism page for Rumford Center <3>
  • Rumford Point
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rumford Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rumford Point
    • Rumford Point is located in Oxford County
    • Jump to TripAdvisor's Tourism page for Rumford Point <3>
  • Rumford
    (Less than 2 miles to the southwest)
  • Shelburne
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Shelburne have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shelburne
    • Shelburne is located in Coos County (NH)
    • Population from the 2020 Census: 342 people
    • Jump to TripAdvisor's Tourism page for Shelburne <3>
  • South Paris
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for South Paris have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Paris
    • South Paris is located in Oxford County
    • Jump to TripAdvisor's Tourism page for South Paris <3>
  • South Waterford
    (28 miles [45.1 km] to the south)
  • Strong
    (23 miles [37 km] to the northeast)
  • Sumner
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sumner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sumner
    • Sumner is located in Oxford County
    • Population from the 2020 Census: 920 people
    • Jump to TripAdvisor's Tourism page for Sumner <3>
  • Turner
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Turner have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Turner
    • Turner is located in Androscoggin County
    • Population from the 2020 Census: 5,878 people
    • Jump to TripAdvisor's Tourism page for Turner <3>
  • Upton
    (24 miles [38.6 km] to the west)
    • Note: The GPS coordinates that we are using for Upton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Upton
    • Upton is located in Oxford County
    • Population from the 2020 Census: 110 people
    • Jump to TripAdvisor's Tourism page for Upton <3>
  • Vienna
    (27 miles [43.5 km] to the east)
  • Waterford
    (27 miles [43.5 km] to the south)
    • Jump to our Gazetteer entry for Waterford
    • Waterford is located in Oxford County
    • Population from the 2020 Census: 1,602 people
    • Waterford has also been known as:
    • Sweats Island
    • Sweet Island
    • Swetts Island
    • Waterford Flat
    • Jump to TripAdvisor's Tourism page for Waterford <3>
  • Wayne
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wayne
    • Wayne is located in Kennebec County
    • Population from the 2020 Census: 1,161 people
    • Jump to TripAdvisor's Tourism page for Wayne <3>
  • Weld
    (11 miles [17.7 km] to the northeast)
    • Jump to our Gazetteer entry for Weld
    • Weld is located in Franklin County
    • Population from the 2020 Census: 417 people
    • Jump to TripAdvisor's Tourism page for Weld <3>
  • West Paris
    (16 miles [25.7 km] to the south)
  • Wilton
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilton
    • Wilton is located in Franklin County
    • Population from the 2020 Census: 3,929 people
    • Jump to TripAdvisor's Tourism page for Wilton <3>
  • Woodstock
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Woodstock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodstock
    • Woodstock is located in Oxford County
    • Population from the 2020 Census: 1,308 people
    • Jump to TripAdvisor's Tourism page for Woodstock <3>

Unfortunately, we don't know of an official website for Mexico. If you can help, please contact us through our Feedback Page.

The official website for Oxford County: www.oxfordcounty.org/

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Mexico) to Point B.Our distance measurements begin at a specific point in Mexico. The point we use is located at these GPS coordinates - Latitude: 44.5609, Longitude: -70.5453       In this case, the coordinates for Mexico have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024