Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Lubec had a population of 1,800 people in 1895 with a post office and no railroad service. In 2020, Lubec had a population of 1,267 people.
The following communities are listed based on their distance from Lubec, with the one closest to Lubec listed first.
- North Lubec
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for North Lubec
- North Lubec is located in Washington County
- South Lubec
(2 miles [3.2 km] to the south)
- Note: The GPS coordinates that we are using for South Lubec have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Lubec
- South Lubec is located in Washington County
- Eastport
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Eastport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eastport
- Eastport is located in Washington County
- Population from the 2020 Census: 1,275 people
- Jump to TripAdvisor's Tourism page for Eastport <3>
- West Lubec
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for West Lubec have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Lubec
- West Lubec is located in Washington County
- Perry
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Perry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perry
- Perry is located in Washington County
- Population from the 2020 Census: 934 people
- Whiting
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Whiting have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whiting
- Whiting is located in Washington County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Whiting <3>
- Pembroke
(10 miles [16.1 km] to the northwest)
- West Pembroke
(11 miles [17.7 km] to the northwest)
- Jump to our Gazetteer entry for West Pembroke
- West Pembroke is located in Washington County
- Dennysville
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Dennysville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dennysville
- Dennysville is located in Washington County
- Population from the 2020 Census: 331 people
- Jump to TripAdvisor's Tourism page for Dennysville <3>
- North Perry
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for North Perry
- North Perry is located in Washington County
- South Robbinston
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for South Robbinston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Robbinston
- South Robbinston is located in Washington County
- Robbinston
(16 miles [25.7 km] to the northwest)
- Charlotte
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Charlotte have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charlotte
- Charlotte is located in Washington County
- Population from the 2020 Census: 320 people
- Marion
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion
- Marion is located in Washington County
- Cutler
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Cutler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutler
- Cutler is located in Washington County
- Population from the 2020 Census: 522 people
- Jump to TripAdvisor's Tourism page for Cutler <3>
- North Cutler
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for North Cutler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Cutler
- North Cutler is located in Washington County
- Red Beach
(19 miles [30.6 km] to the northwest)
- Jump to our Gazetteer entry for Red Beach
- Red Beach is located in Washington County
- East Machias
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for East Machias have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Machias
- East Machias is located in Washington County
- Population from the 2020 Census: 1,305 people
- Jump to TripAdvisor's Tourism page for East Machias <3>
- Meddybemps
(21 miles [33.8 km] to the northwest)
- Calais
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Calais have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calais
- Calais is located in Washington County
- Population from the 2020 Census: 3,026 people
- Jump to TripAdvisor's Tourism page for Calais <3>
- Machiasport
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Machiasport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Machiasport
- Machiasport is located in Washington County
- Population from the 2020 Census: 961 people
- Jump to TripAdvisor's Tourism page for Machiasport <3>
- Cooper
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Cooper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooper
- Cooper is located in Washington County
- Population from the 2020 Census: 146 people
- Larrabee
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Larrabee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larrabee
- Larrabee is located in Washington County
- Bucks Harbor
(24 miles [38.6 km] to the southwest)
- Jump to our Gazetteer entry for Bucks Harbor
- Bucks Harbor is located in Washington County
- Baring
(24 miles [38.6 km] to the northwest)
- Jump to our Gazetteer entry for Baring
- Baring is located in Washington County
- Population from the 2020 Census: 239 people
- Baring has also been known as:
- Baring Plantation
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Lubec. If you can help, please contact us through our Feedback Page.
The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Lubec, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |