Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Kennebago Settlement in the Atlas, the following communities of the 1890's would have been found near the current location of Kennebago Settlement. The following communities are listed based on their distance, with the one closest to Kennebago Settlement listed first.
- Dead River ‑ Historic
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Dead River have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dead River
- Dead River is located in Franklin County
- Eustis
(6 miles [9.7 km] to the northeast)
- Stratton
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Stratton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stratton
- Stratton is located in Franklin County
- Jump to TripAdvisor's Tourism page for Stratton <3>
- Rangeley
(10 miles [16.1 km] to the southwest)
- East Madrid
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for East Madrid have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Madrid
- East Madrid is located in Franklin County
- Madrid
(17 miles [27.4 km] to the south)
- Bemis
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Bemis
- Bemis is located in Franklin County
- Salem
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Franklin County
- Phillips
(21 miles [33.8 km] to the southeast)
- Kingfield
(22 miles [35.4 km] to the southeast)
- Wilsons Mills
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Wilsons Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilsons Mills
- Wilsons Mills is located in Oxford County
- Lexington
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lexington
- Lexington is located in Somerset County
- Byron
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Byron have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byron
- Byron is located in Oxford County
- Population from the 2020 Census: 149 people
- Strong
(26 miles [41.8 km] to the southeast)
- New Portland
(27 miles [43.5 km] to the southeast)
- Middle Dam
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Middle Dam have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middle Dam
- Middle Dam is located in Oxford County
- Weld
(28 miles [45.1 km] to the south)
- South Strong
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for South Strong have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Strong
- South Strong is located in Franklin County
- North New Portland
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for North New Portland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North New Portland
- North New Portland is located in Somerset County
- Jump to TripAdvisor's Tourism page for North New Portland <3>
- Lowelltown
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Lowelltown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowelltown
- Lowelltown is located in Franklin County
- Roxbury
(29 miles [46.7 km] to the south)
- New Vineyard
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for New Vineyard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Vineyard
- New Vineyard is located in Franklin County
- Population from the 2020 Census: 777 people
- East New Portland
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for East New Portland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East New Portland
- East New Portland is located in Somerset County
Off-the-Road Links ...
The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Kennebago Settlement, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |