TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Jonesboro. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Jonesboro.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Jonesboro - within 30 miles [48.3 km]<1>.
Unless noted otherwise, the following communities are located in Washington County.
Our list sorts the communities in alphabetical order. There are 24 communities listed:
- Addison
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Addison have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Addison
- Addison is located in Washington County
- Population from the 2020 Census: 1,265 people
- Jump to TripAdvisor's Tourism page for Addison <3>
- Alexander
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Alexander have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alexander
- Alexander is located in Washington County
- Population from the 2020 Census: 486 people
- Jump to TripAdvisor's Tourism page for Alexander <3>
- Beals
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Beals have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beals
- Beals is located in Washington County
- Population from the 2020 Census: 504 people
- Jump to TripAdvisor's Tourism page for Beals <3>
- Beddington
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Beddington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beddington
- Beddington is located in Washington County
- Population from the 2020 Census: 48 people
- Jump to TripAdvisor's Tourism page for Beddington <3>
- Birch Harbor
(29 miles [46.7 km] to the southwest)
- Cherryfield
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Cherryfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherryfield
- Cherryfield is located in Washington County
- Population from the 2020 Census: 1,167 people
- Jump to TripAdvisor's Tourism page for Cherryfield <3>
- Columbia Falls
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Columbia Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbia Falls
- Columbia Falls is located in Washington County
- Population from the 2020 Census: 536 people
- Jump to TripAdvisor's Tourism page for Columbia Falls <3>
- Corea
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Corea have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Corea
- Corea is located in Hancock County
- Jump to TripAdvisor's Tourism page for Corea <3>
- Cutler
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Cutler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutler
- Cutler is located in Washington County
- Population from the 2020 Census: 522 people
- Jump to TripAdvisor's Tourism page for Cutler <3>
- Dennysville
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Dennysville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dennysville
- Dennysville is located in Washington County
- Population from the 2020 Census: 331 people
- Jump to TripAdvisor's Tourism page for Dennysville <3>
- East Machias
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for East Machias have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Machias
- East Machias is located in Washington County
- Population from the 2020 Census: 1,305 people
- Jump to TripAdvisor's Tourism page for East Machias <3>
- East Sullivan
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for East Sullivan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Sullivan
- East Sullivan is located in Hancock County
- Jump to TripAdvisor's Tourism page for East Sullivan <3>
- Gouldsboro
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Gouldsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gouldsboro
- Gouldsboro is located in Hancock County
- Population from the 2020 Census: 1,743 people
- Jump to TripAdvisor's Tourism page for Gouldsboro <3>
- Harrington
(12 miles [19.3 km] to the west)
- Jonesport
(9 miles [14.5 km] to the south)
- Machias
(6 miles [9.7 km] to the northeast)
- Machiasport
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Machiasport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Machiasport
- Machiasport is located in Washington County
- Population from the 2020 Census: 961 people
- Jump to TripAdvisor's Tourism page for Machiasport <3>
- Meddybemps
(28 miles [45.1 km] to the north)
- Milbridge
(17 miles [27.4 km] to the southwest)
- Pembroke
(28 miles [45.1 km] to the northeast)
- Prospect Harbor
(28 miles [45.1 km] to the southwest)
- Steuben
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Steuben have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steuben
- Steuben is located in Washington County
- Population from the 2020 Census: 1,148 people
- Jump to TripAdvisor's Tourism page for Steuben <3>
- Wesley
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Wesley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wesley
- Wesley is located in Washington County
- Population from the 2020 Census: 94 people
- Jump to TripAdvisor's Tourism page for Wesley <3>
- Whiting
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Whiting have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whiting
- Whiting is located in Washington County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Whiting <3>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Jonesboro. If you can help, please contact us through our Feedback Page.
The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Jonesboro) to Point B.Our distance measurements begin at a specific point in Jonesboro. The point we use is located at these GPS coordinates - Latitude: 44.6626, Longitude: -67.5725 In this case, the coordinates for Jonesboro have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |