RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Somerset County >> Jackman Mill >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Maine


The Commemorative Quarter for Maine







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Jackman Mill, we use the following websites to find information relevant to Jackman Mill and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Jackman Mill:
    • 45.646158, -70.245067
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Jackman Mill
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Jackman Mill ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Blair
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Blair have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blair
    • Blair is located in Somerset County
  • Dennistown
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Dennistown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dennistown
    • Dennistown is located in Somerset County
  • Dyerville
    (2 miles [3.2 km] to the west)
    • Note: The GPS coordinates that we are using for Dyerville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dyerville
    • Dyerville is located in Somerset County
  • Jackman
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for Jackman have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jackman
    • Jackman is located in Somerset County
    • Population from the 2020 Census: 813 people
    • Jump to TripAdvisor's Tourism page for Jackman <2>
  • Long Pond
    (7 miles [11.3 km] to the east)
    • Jump to our Gazetteer entry for Long Pond
    • Long Pond is located in Somerset County
  • Moose River
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for Moose River have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Moose River
    • Moose River is located in Somerset County
    • Population from the 2020 Census: 207 people
  • Skinner
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Skinner have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Skinner
    • Skinner is located in Franklin County
  • Three Streams
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Three Streams have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Three Streams
    • Three Streams is located in Somerset County

How Far From Jackman Mill to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Jackman Mill to various places of note, such as the White House.

With a nod to our favorite Gazetteers and using the location of where the historic<3> community of Jackman Mill once stood, the straight-line distance<4> beginning in Jackman Mill and extending to:

  • Skowhegan, which is the Seat of Somerset County, lies 65 miles [104.6 km]<4> to the south southeast. If you could walk a straight line from Jackman Mill to Skowhegan, with an average speed<5> of 2.2 miles [3.5 km] per hour, it would take most of three days to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take about three full days.
  • Augusta, which is the State Capital of Maine, lies 94 miles [151.3 km] to the south southeast (SSE). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than two hours, a buggy would take most of three days and walking would take 6 days.
  • The White House (Washington, DC) is 580 miles [933.4 km] to the southwest (SW). Driving would take just over a day, a buggy would take 23 days and walking would take 33 days.
  • The shortest distance<6> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 5,345 miles [8,601.9 km] and it lies to the east northeast (ENE).<7>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,064 miles [9,759.1 km] and it lies to the east northeast (ENE).<8>
  • The distance to Saint Peter's Basilica (The Vatican) is 3,940 miles [6,340.8 km] and it lies to the east northeast (ENE).<9>

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jackman Mill, please let us know so that we can improve our accuracy.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Jackman Mill) to Point B.Our distance measurements begin at a specific point in Jackman Mill. The point we use is located at these GPS coordinates - Latitude: 45.6462, Longitude: -70.2451       In this case, the coordinates for Jackman Mill have been provided by the Geographic Names Information System (GNIS).
<5>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<6>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Jackman Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<7>The calculated bearing (or angle) to Jerusalem is 302.92 degrees.
<8>The calculated bearing (or angle) to Mecca is 298.955 degrees.
<9>The calculated bearing (or angle) to the Vatican is 298.405 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024