RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> Hancock County >> Harborside >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Maine

The Commemorative Quarter for Maine





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Harborside. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Harborside.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Harborside - within 30 miles [48.3 km]<1>.

Unless noted otherwise, the following communities are located in Hancock County.

Our list sorts the communities in alphabetical order. There are 71 communities listed:

  • Appleton
    (21 miles [33.8 km] to the west)
  • Bar Harbor
    (30 miles [48.3 km] to the east)
  • Bass Harbor
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Bass Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bass Harbor
    • Bass Harbor is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Bass Harbor <2>
  • Belfast
    (10 miles [16.1 km] to the northwest)
  • Bernard
    (23 miles [37 km] to the east)
  • Blue Hill
    (12 miles [19.3 km] to the east)
  • Brewer
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Brewer have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brewer
    • Brewer is located in Penobscot County
    • Population from the 2020 Census: 8,948 people
    • Jump to TripAdvisor's Tourism page for Brewer <2>
  • Brooklin
    (13 miles [20.9 km] to the southeast)
  • Brooks
    (20 miles [32.2 km] to the northwest)
  • Brooksville
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Brooksville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brooksville
    • Brooksville is located in Hancock County
    • Population from the 2020 Census: 910 people
    • Jump to TripAdvisor's Tourism page for Brooksville <2>
  • Bucksport
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Bucksport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bucksport
    • Bucksport is located in Hancock County
    • Population from the 2020 Census: 4,916 people
    • Jump to TripAdvisor's Tourism page for Bucksport <2>
  • Camden
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Camden have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Camden
    • Camden is located in Knox County
    • Population from the 2020 Census: 4,806 people
    • Jump to TripAdvisor's Tourism page for Camden <2>
  • Castine
    (2 miles [3.2 km] to the north)
  • Dedham
    (24 miles [38.6 km] to the north)
    • Note: The GPS coordinates that we are using for Dedham have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dedham
    • Dedham is located in Hancock County
    • Population from the 2020 Census: 1,666 people
    • Jump to TripAdvisor's Tourism page for Dedham <2>
  • Deer Isle
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Deer Isle have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Isle
    • Deer Isle is located in Hancock County
    • Population from the 2020 Census: 1,911 people
    • Jump to TripAdvisor's Tourism page for Deer Isle <2>
  • East Blue Hill
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for East Blue Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Blue Hill
    • East Blue Hill is located in Hancock County
    • Jump to TripAdvisor's Tourism page for East Blue Hill <2>
  • East Orland
    (16 miles [25.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for East Orland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Orland
    • East Orland is located in Hancock County
    • Jump to TripAdvisor's Tourism page for East Orland <2>
  • Ellsworth
    (23 miles [37 km] to the northeast)
  • Frankfort
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Frankfort have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frankfort
    • Frankfort is located in Waldo County
    • Population from the 2020 Census: 1,196 people
    • Jump to TripAdvisor's Tourism page for Frankfort <2>
  • Freedom
    (26 miles [41.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Freedom have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Freedom
    • Freedom is located in Waldo County
    • Population from the 2020 Census: 732 people
    • Jump to TripAdvisor's Tourism page for Freedom <2>
  • Frenchboro
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Frenchboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Frenchboro
    • Frenchboro is located in Hancock County
    • Population from the 2020 Census: 59 people
    • Jump to TripAdvisor's Tourism page for Frenchboro <2>
  • Hampden
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for Hampden have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampden
    • Hampden is located in Penobscot County
    • Population from the 2020 Census: 7,513 people
    • Jump to TripAdvisor's Tourism page for Hampden <2>
  • Hancock
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Hancock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hancock
    • Hancock is located in Hancock County
    • Population from the 2020 Census: 2,440 people
    • Jump to TripAdvisor's Tourism page for Hancock <2>
  • Holden
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Holden have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Holden
    • Holden is located in Penobscot County
    • Population from the 2020 Census: 3,120 people
    • Jump to TripAdvisor's Tourism page for Holden <2>
  • Hope
    (17 miles [27.4 km] to the west)
  • Hulls Cove
    (28 miles [45.1 km] to the east)
  • Isle Au Haut
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Isle Au Haut have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Isle Au Haut
    • Isle Au Haut is located in Knox County
    • Population from the 2020 Census: 65 people
    • Jump to TripAdvisor's Tourism page for Isle Au Haut <2>
  • Lamoine
    (26 miles [41.8 km] to the east)
  • Liberty
    (24 miles [38.6 km] to the west)
    • Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Liberty
    • Liberty is located in Waldo County
    • Population from the 2020 Census: 977 people
    • Jump to TripAdvisor's Tourism page for Liberty <2>
  • Lincolnville Center
    (14 miles [22.5 km] to the west)
  • Lincolnville
    (10 miles [16.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lincolnville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lincolnville
    • Lincolnville is located in Waldo County
    • Population from the 2020 Census: 2,252 people
    • Jump to TripAdvisor's Tourism page for Lincolnville <2>
  • Little Deer Isle
    (7 miles [11.3 km] to the southeast)
  • Morrill
    (17 miles [27.4 km] to the west)
  • Mount Desert
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Mount Desert have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Desert
    • Mount Desert is located in Hancock County
    • Population from the 2020 Census: 2,114 people
    • Jump to TripAdvisor's Tourism page for Mount Desert <2>
  • North Haven
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for North Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Haven
    • North Haven is located in Knox County
    • Population from the 2020 Census: 358 people
    • Jump to TripAdvisor's Tourism page for North Haven <2>
  • Northeast Harbor
    (26 miles [41.8 km] to the east)
  • Northport
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Northport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Northport
    • Northport is located in Waldo County
    • Population from the 2020 Census: 1,593 people
    • Jump to TripAdvisor's Tourism page for Northport <2>
  • Orland
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Orland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orland
    • Orland is located in Hancock County
    • Population from the 2020 Census: 2,173 people
    • Jump to TripAdvisor's Tourism page for Orland <2>
  • Orrington
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Orrington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Orrington
    • Orrington is located in Penobscot County
    • Population from the 2020 Census: 3,668 people
    • Jump to TripAdvisor's Tourism page for Orrington <2>
  • Otter Creek
    (30 miles [48.3 km] to the east)
  • Owls Head
    (21 miles [33.8 km] to the southwest)
  • Penobscot
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for Penobscot have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penobscot
    • Penobscot is located in Hancock County
    • Population from the 2020 Census: 1,220 people
    • Jump to TripAdvisor's Tourism page for Penobscot <2>
  • Prospect
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prospect
    • Prospect is located in Waldo County
    • Population from the 2020 Census: 750 people
    • Jump to TripAdvisor's Tourism page for Prospect <2>
  • Rockland
    (22 miles [35.4 km] to the southwest)
  • Rockport
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rockport
    • Rockport is located in Knox County
    • Population from the 2020 Census: 3,389 people
    • Jump to TripAdvisor's Tourism page for Rockport <2>
  • Sandy Point
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Sandy Point have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandy Point
    • Sandy Point is located in Waldo County
    • Jump to TripAdvisor's Tourism page for Sandy Point <2>
  • Seal Cove
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for Seal Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Seal Cove
    • Seal Cove is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Seal Cove <2>
  • Seal Harbor
    (28 miles [45.1 km] to the east)
    • Note: The GPS coordinates that we are using for Seal Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Seal Harbor
    • Seal Harbor is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Seal Harbor <2>
  • Searsmont
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Searsmont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Searsmont
    • Searsmont is located in Waldo County
    • Population from the 2020 Census: 1,424 people
    • Jump to TripAdvisor's Tourism page for Searsmont <2>
  • Searsport
    (9 miles [14.5 km] to the northwest)
  • Sedgwick
    (10 miles [16.1 km] to the east)
    • Note: The GPS coordinates that we are using for Sedgwick have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sedgwick
    • Sedgwick is located in Hancock County
    • Population from the 2020 Census: 1,175 people
    • Jump to TripAdvisor's Tourism page for Sedgwick <2>
  • South Thomaston
    (25 miles [40.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for South Thomaston have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Thomaston
    • South Thomaston is located in Knox County
    • Population from the 2020 Census: 1,642 people
    • Jump to TripAdvisor's Tourism page for South Thomaston <2>
  • Southwest Harbor
    (24 miles [38.6 km] to the east)
    • Note: The GPS coordinates that we are using for Southwest Harbor have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Southwest Harbor
    • Southwest Harbor is located in Hancock County
    • Population from the 2020 Census: 1,793 people
    • Jump to TripAdvisor's Tourism page for Southwest Harbor <2>
  • Spruce Head
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Spruce Head have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spruce Head
    • Spruce Head is located in Knox County
    • Jump to TripAdvisor's Tourism page for Spruce Head <2>
  • Stockton Springs
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Stockton Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stockton Springs
    • Stockton Springs is located in Waldo County
    • Population from the 2020 Census: 1,640 people
    • Jump to TripAdvisor's Tourism page for Stockton Springs <2>
  • Stonington
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Stonington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stonington
    • Stonington is located in Hancock County
    • Population from the 2020 Census: 1,033 people
    • Jump to TripAdvisor's Tourism page for Stonington <2>
  • Sunset
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sunset have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sunset
    • Sunset is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Sunset <2>
  • Surry
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Surry have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Surry
    • Surry is located in Hancock County
    • Population from the 2020 Census: 1,504 people
    • Jump to TripAdvisor's Tourism page for Surry <2>
  • Swans Island
    (22 miles [35.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Swans Island have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swans Island
    • Swans Island is located in Hancock County
    • Population from the 2020 Census: 323 people
    • Jump to TripAdvisor's Tourism page for Swans Island <2>
  • Swanville
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Swanville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Swanville
    • Swanville is located in Waldo County
    • Population from the 2020 Census: 1,359 people
    • Jump to TripAdvisor's Tourism page for Swanville <2>
  • Thomaston
    (26 miles [41.8 km] to the southwest)
  • Thorndike
    (27 miles [43.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Thorndike have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Thorndike
    • Thorndike is located in Waldo County
    • Population from the 2020 Census: 897 people
    • Jump to TripAdvisor's Tourism page for Thorndike <2>
  • Trenton
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Trenton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Trenton
    • Trenton is located in Hancock County
    • Population from the 2020 Census: 1,568 people
    • Jump to TripAdvisor's Tourism page for Trenton <2>
  • Troy
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Troy have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Troy
    • Troy is located in Waldo County
    • Population from the 2020 Census: 1,053 people
    • Jump to TripAdvisor's Tourism page for Troy <2>
  • Union
    (24 miles [38.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union
    • Union is located in Knox County
    • Population from the 2020 Census: 2,275 people
    • Jump to TripAdvisor's Tourism page for Union <2>
  • Vinalhaven
    (20 miles [32.2 km] to the south)
  • Warren
    (26 miles [41.8 km] to the southwest)
  • Washington
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Washington have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Washington
    • Washington is located in Knox County
    • Population from the 2020 Census: 1,520 people
    • Jump to TripAdvisor's Tourism page for Washington <2>
  • West Rockport
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for West Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Rockport
    • West Rockport is located in Knox County
    • Jump to TripAdvisor's Tourism page for West Rockport <2>
  • West Tremont
    (21 miles [33.8 km] to the east)
    • Note: The GPS coordinates that we are using for West Tremont have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Tremont
    • West Tremont is located in Hancock County
    • Jump to TripAdvisor's Tourism page for West Tremont <2>
  • Winterport
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Winterport have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Winterport
    • Winterport is located in Waldo County
    • Population from the 2020 Census: 4,028 people
    • Jump to TripAdvisor's Tourism page for Winterport <2>

Unfortunately, we don't know of an official website for Harborside. If you can help, please contact us through our Feedback Page.

The official website for Hancock County: www.co.hancock.me.us/

The official website for State of Maine: https://www.maine.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Harborside) to Point B.Our distance measurements begin at a specific point in Harborside. The point we use is located at these GPS coordinates - Latitude: 44.3490, Longitude: -68.8148       In this case, the coordinates for Harborside have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024