RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Maine >> York County >> Dayton >> Census DataIndex...










Learn About
The Commemorative
Quarter for
Maine


The Commemorative Quarter for Maine







Census Data for Dayton

Population ...

The most recent Census Estimate<1> was for 2019 and it gave Dayton a population of 2,089 people.

The last Decennial Census<2> was in 2010, which gave Dayton a population of 1,965 people.

The community of Dayton is located in York County. The 2010 Census gave York County; a population of 197,131 people. This means that Dayton had 1% of the county's total population, making it York's 25th most populous community.

At the same time, Maine had a population of 1,328,361 people, meaning that Dayton had 0.15% of the total population of Maine - making it the state's 170th most populous community.

Area ...

The 2010 Census shows that the sampling area for Dayton has a total area of 18.4 square miles [47.7 km²]. Of this total, 17.89 square miles [46.3 km²] is land, with the balance (2.77%) being water (0.51 square miles [1.3 km²]).

York County has a land area of 990 square miles [2,565.9 km²]. At 17.89 square miles [46.3 km²], Dayton has 1.81% of the county's total land area.

  • Continue Reading ...
    • When the Census Bureau conducts a census for a community like Dayton, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the community.
    • Things like population, area and housing for Dayton reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Dayton might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
    • Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
    • Lat:   43° 33' 8"   (or 43.55°)
    • Lon:   -70° 34' 31"   (or -70.58°)
    • More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).

Housing Units ...

At the time of the 2010 Census, Dayton had 753 Housing Units<3> and with its population of 1,965 people, this averages 2.61 people per Housing Unit.

  • Continue Reading ...
    • The 2010 Census shows Dayton had a land area of 17.89 square miles [46.3 km²]. This translates to 40.93 Housing Units per square mile [15.8 housing units/km²].
    • From the Census of 2000: Dayton had 663 Housing Units, a population of 1,805 people and a land area of 17.89 square miles [46.3 km²]. This gives a density of 2.72 people per Housing Unit and 36.01 Housing Units per square mile [13.91 housing units/km²].
    • Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 Census and the 2000 Census, there were changes in the sampling area for Dayton and you need to be careful when comparing values between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).

York County ...

Dayton is located in York County<4>.

The county had a population of 197,131 people at the 2010 Census. With it's population of 1,965 people, Dayton represented 1% of the county's total.

In addition, where the community of Dayton has a population density of 106.8 people per square mile [41.24 people/km²], York County averages 199 people per square mile [76.8 people/km²].

For more information, please visit our Census Page for York County.

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Dayton, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Dayton. It's important to note that from one Census to the next, the shape and location of the polygon can change.

  • Continue Reading ...
    • Although we don't have specific information about the shape of the polygon for Dayton or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
    • If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Dayton, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Dayton.

  • Continue Reading ...
    • For the 2010 Census, the location was given as:
    • Lat:   43.552458°   (or 43°33'8" N)
    • Lon:   -70.575523°   (or -70°34'31" W)
    • For the 2000 Census, the location given was:
    • Lat:   43.542659°   (or 43°32'33" N)
    • Lon:   -70.579381°   (or -70°34'45" W)
    • The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 3,715 feet to the north<5> of the location that was used in the 2000 Census.
    • The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#582434) to Dayton. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Dayton. The GNIS point has been mapped to the latitude/longitude:
    • Lat:   43.549804°   (or 43°32'59" N)
    • Lon:   -70.575054°   (or -70°34'30" W)
    • The GPS location given for the 2010 Census lies 975 feet to the north<6> of the point given by the GNIS for Dayton. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Dayton.

Miscellaneous Information for Dayton ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either York County or the community of Dayton:

  • The GNIS Codes ...
    • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Dayton:
    • GNIS ID for Dayton: 582434
    • GNIS ID for York County: 581301
    • GNIS ID for State of Maine: 1779787
  • The FIPS Codes ...
    • An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
    • State Code: 23 (Maine)
    • County Code: 031 (York County)
    • Place Code: 16725 (Dayton)
    • State & County Code: 23/031 (Maine / York County)
    • State & Place Code: 23/16725 (Maine / Dayton)
  • Misc. Census Codes ...
    • Dayton is located in Census Region #1 (the Northeast Region) and Division #1 (the New England Division).

For more information about the various Federal identification codes, please visit our Misc Page for Dayton.

Unfortunately, we don't know of a website for Dayton. If you can help, please contact us through our Feedback Page.

The official website for York County: www.co.york.me.us/

The official website for State of Maine: https://www.maine.gov/

The official website of the U.S. Census Bureau

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019.
<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.
<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).
<4>If you're interested in how the shape of Maine's counties, including York, have changed over time, we recommend the Atlas of Historical County Boundaries.
<5>The calculated bearing (or angle) to the 2010 Census location is 344 degrees and a distance of 3,715 feet.
<6>The calculated bearing (or angle) to the GNIS point is 7 degrees and a distance of 975 feet.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 16 Jul 2024