|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the West Lubec Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the West Lubec Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the West Lubec Cemetery. We've listed the following communities based on their distance, with the closest first.
- South Lubec
(2 miles [3.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for South Lubec. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for South Lubec
- South Lubec is located in Washington County
- Lubec
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Lubec have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lubec
- Lubec is located in Washington County
- Population from the 2020 Census: 1,267 people
- Jump to TripAdvisor's Tourism page for Lubec <4>
- North Lubec
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for North Lubec
- North Lubec is located in Washington County
- Whiting
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Whiting have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whiting
- Whiting is located in Washington County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Whiting <4>
- Campobello Parish
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Campobello Parish came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Campobello Parish
- Welshpool
(6 miles [9.7 km] to the northeast)
- Eastport
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Eastport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eastport
- Eastport is located in Washington County
- Population from the 2020 Census: 1,275 people
- Jump to TripAdvisor's Tourism page for Eastport <4>
- Campobello Island
(7 miles [11.3 km] to the northeast)
- Indian Island
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Indian Island came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Indian Island
- Cummings Cove
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Cummings Cove came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Cummings Cove
- Chocolate Cove
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Chocolate Cove came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Chocolate Cove
- Fairhaven
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Fairhaven came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Fairhaven
- Jump to TripAdvisor's Tourism page for Fairhaven <4>
- Wilsons Beach
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Wilsons Beach came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Wilsons Beach
- Pembroke
(10 miles [16.1 km] to the northwest)
- Leonardville
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Leonardville came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Leonardville
- West Pembroke
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for West Pembroke
- West Pembroke is located in Washington County
- Dennysville
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Dennysville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Dennysville
- Dennysville is located in Washington County
- Population from the 2020 Census: 331 people
- Jump to TripAdvisor's Tourism page for Dennysville <4>
- Perry
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Perry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perry
- Perry is located in Washington County
- Population from the 2020 Census: 934 people
- Northern Harbour
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Northern Harbour came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Northern Harbour
- Lower Dennysville
(11 miles [17.7 km] to the northwest)
- Jump to our Gazetteer entry for Lower Dennysville
- Lower Dennysville is located in Washington County
- Lords Cove
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Lords Cove came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Lords Cove
- Cutler
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Cutler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutler
- Cutler is located in Washington County
- Population from the 2020 Census: 522 people
- Jump to TripAdvisor's Tourism page for Cutler <4>
- Richardson
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Richardson came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Richardson
- Lambertville
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Lambertville came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Lambertville
- Hersonville
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Hersonville came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Hersonville
Off-the-Road Links ...
The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the West Lubec Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.8262, Longitude: -67.0469 In this case, the coordinates for the West Lubec Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
|
|