|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hillcrest Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hillcrest Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hillcrest Cemetery. We've listed the following communities based on their distance, with the closest first.
- Kimbles Corner
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for Kimbles Corner
- Kimbles Corner is located in York County
- Chicopee
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for Chicopee
- Chicopee is located in York County
- Hollis Center
(4 miles [6.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hollis Center. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hollis Center
- Hollis Center is located in York County
- Jump to TripAdvisor's Tourism page for Hollis Center <3>
- Bar Mills
(4 miles [6.4 km] to the southeast)
- Buxton
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Buxton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buxton
- Buxton is located in York County
- Population from the 2020 Census: 8,368 people
- Clarks Mills
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for Clarks Mills
- Clarks Mills is located in York County
- East Limington
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for East Limington. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for East Limington
- East Limington is located in York County
- Standish
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Standish have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Standish
- Standish is located in Cumberland County
- Population from the 2020 Census: 10,197 people
- Jump to TripAdvisor's Tourism page for Standish <3>
- South Limington
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for South Limington. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for South Limington
- South Limington is located in York County
- North Waterboro
(6 miles [9.7 km] to the southwest)
- South Hollis
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for South Hollis. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for South Hollis
- South Hollis is located in York County
- North Limington
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for North Limington. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for North Limington
- North Limington is located in York County
- Limington
(6 miles [9.7 km] to the northwest)
- Lake Arrowhead
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Lake Arrowhead have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Arrowhead
- Lake Arrowhead is located in York County
- East Waterboro
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for East Waterboro have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Waterboro
- East Waterboro is located in York County
- Jump to TripAdvisor's Tourism page for East Waterboro <3>
- Dayton
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Dayton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dayton
- Dayton is located in York County
- Population from the 2020 Census: 2,107 people
- Jump to TripAdvisor's Tourism page for Dayton <3>
- Gorham
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Gorham have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gorham
- Gorham is located in Cumberland County
- Population from the 2020 Census: 17,962 people
- Jump to TripAdvisor's Tourism page for Gorham <3>
- Sebago Lake
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sebago Lake. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sebago Lake
- Sebago Lake is located in Cumberland County
- Steep Falls
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Steep Falls have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steep Falls
- Steep Falls is located in Cumberland County
- Jump to TripAdvisor's Tourism page for Steep Falls <3>
- Limerick
(9 miles [14.5 km] to the west)
- Ross Corner
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ross Corner. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ross Corner
- Ross Corner is located in York County
- Waterboro
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Waterboro have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waterboro
- Waterboro is located in York County
- Population from the 2020 Census: 8,007 people
- Jump to TripAdvisor's Tourism page for Waterboro <3>
- North Scarborough
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for North Scarborough
- North Scarborough is located in Cumberland County
- South Windham
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for South Windham have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Windham
- South Windham is located in Cumberland County
- Newhall
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Newhall. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Newhall
- Newhall is located in Cumberland County
Off-the-Road Links ...
The official website for York County: www.co.york.me.us/ The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hillcrest Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.6617, Longitude: -70.6095 In this case, the coordinates for the Hillcrest Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|