Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Fairview Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Fairview Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Fairview Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- North Perry
(Less than 2 miles to the southeast)- Jump to our Gazetteer entry for North Perry
- North Perry is located in Washington County
- Robbinston
(2 miles [3.2 km] to the northeast)- Jump to our Gazetteer entry for Robbinston
- Robbinston is located in Washington County
- Population from the 2020 Census: 571 people
- Jump to TripAdvisor's Tourism page for Robbinston <2>
- Perry
(5 miles [8 km] to the southeast) - Saint Andrews Parish
(5 miles [8 km] to the east)- Note: The GPS coordinates that we are using for Saint Andrews Parish came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Saint Andrews Parish
- Saint Andrews
(5 miles [8 km] to the east)- Note: The GPS coordinates that we are using for Saint Andrews came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Saint Andrews
- Jump to TripAdvisor's Tourism page for Saint Andrews <2>
- Red Beach
(5 miles [8 km] to the north)- Jump to our Gazetteer entry for Red Beach
- Red Beach is located in Washington County
- Bayside
(5 miles [8 km] to the north)- Jump to our Gazetteer entry for Bayside
- Jump to TripAdvisor's Tourism page for Bayside <2>
- West Pembroke
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for West Pembroke
- West Pembroke is located in Washington County
- Pembroke
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Washington County
- Population from the 2020 Census: 796 people
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Ministers Island
(6 miles [9.7 km] to the northeast)- Jump to our Gazetteer entry for Ministers Island
- Chamcook
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Chamcook came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Chamcook
- Jump to TripAdvisor's Tourism page for Chamcook <2>
- Calais
(7 miles [11.3 km] to the northwest)- Note: The GPS coordinates that we are using for Calais have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calais
- Calais is located in Washington County
- Population from the 2020 Census: 3,026 people
- Jump to TripAdvisor's Tourism page for Calais <2>
- Northern Harbour
(8 miles [12.9 km] to the southeast)- Note: The GPS coordinates that we are using for Northern Harbour came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Northern Harbour
- Lords Cove
(8 miles [12.9 km] to the east)- Note: The GPS coordinates that we are using for Lords Cove came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Lords Cove
- Hersonville
(8 miles [12.9 km] to the east)- Note: The GPS coordinates that we are using for Hersonville came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Hersonville
- Lower Dennysville
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Lower Dennysville
- Lower Dennysville is located in Washington County
- The Ledge
(9 miles [14.5 km] to the north) - Fairhaven
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Fairhaven came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Fairhaven
- Jump to TripAdvisor's Tourism page for Fairhaven <2>
- Lambertville
(9 miles [14.5 km] to the east)- Note: The GPS coordinates that we are using for Lambertville came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Lambertville
- Dennysville
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Dennysville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dennysville
- Dennysville is located in Washington County
- Population from the 2020 Census: 331 people
- Jump to TripAdvisor's Tourism page for Dennysville <2>
- Oak Haven
(10 miles [16.1 km] to the north) - Dufferin Parish
(10 miles [16.1 km] to the north)- Note: The GPS coordinates that we are using for Dufferin Parish came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Dufferin Parish
- Chocolate Cove
(10 miles [16.1 km] to the southeast)- Note: The GPS coordinates that we are using for Chocolate Cove came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Chocolate Cove
- Leonardville
(10 miles [16.1 km] to the southeast)- Note: The GPS coordinates that we are using for Leonardville came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Leonardville
- Richardson
(10 miles [16.1 km] to the east)- Note: The GPS coordinates that we are using for Richardson came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Richardson
- Lamberts Cove
(10 miles [16.1 km] to the east)- Note: The GPS coordinates that we are using for Lamberts Cove came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Lamberts Cove
- Crocker Hill
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Crocker Hill came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Crocker Hill
- Bartletts Mills
(10 miles [16.1 km] to the north)- Note: The GPS coordinates that we are using for Bartletts Mills came from an uncertain source and they still need to be verified:<4>
- Jump to our Gazetteer entry for Bartletts Mills
- Upper Mills
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Upper Mills
- Baring
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Baring
- Baring is located in Washington County
- Population from the 2020 Census: 239 people
- Baring has also been known as:
- Baring Plantation
- Meddybemps
(10 miles [16.1 km] to the west)- Jump to our Gazetteer entry for Meddybemps
- Meddybemps is located in Washington County
- Population from the 2020 Census: 149 people
- Jump to TripAdvisor's Tourism page for Meddybemps <2>
Off-the-Road Links ...
The official website for State of Maine: https://www.maine.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Fairview Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.0473, Longitude: -67.1414 In this case, the coordinates for the Fairview Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |